Home   >   CSC-OpenAccess Library   >   Engineering Science   >  International Journal of Engineering (IJE)
International Journal of Engineering (IJE)
An International peer-review journal operated under CSC-OpenAccess Policy.
ISSN - 1985-2312
Published - Bi-Monthly   |   Established - 2007   |   Year of Publication - 2024

SUBMISSION
November 30, 2024

NOTIFICATION
December 31, 2024

PUBLICATION
January 31, 2025

    
HOME   About IJE   Editorial Board   Call For Papers/Editors   Submission Guidelines   Citation Report   IJE Publications   Subscribe IJE
VIDEO PRESENTATIONS
Visit Video Section to see author video presentations on their publications.
 
 
RESEARCH CENTERS, INSTITUTES & UNIVERSITIES
 
SEE COMPLETE LIST OF PUBLICATIONS
 

IJE CITATION IMPACT
5.942

Refer to In-Process Citation Report for IJE for complete details.
 
LIST OF JOURNALS
Complete list of Open Access journals with free access its publications.
 
For Inquiries & Fast Response cscpress@cscjournals.org

IJE - CITATION REPORT (IN-PROCESS)

Below calculations are based on citations that are extracted through Google Scholar.

Total Citations = 1426
Self Citations = 0
Total Publications = 240

Citation Impact
(Total Citations - Self Citations) / Total Publications

Citation Impact
(1426 - 0) / 240 = 5.942

 
SR
M-CODE
CITATION
1
Akbarzadeh, P., Lehdarboni, A. A., & Derazgisoo, S. M. (2018). Low Reynolds unsteady flow simulation around NACA0012 airfoil with active flow control. Meccanica, 53(14), 3457-3476.
2
James, S. E., Suryan, A., Sebastian, J. J., Mohan, A., & Kim, H. D. (2018). Comparative study of boundary layer control around an ordinary airfoil and a high lift airfoil with secondary blowing. Computers & Fluids, 164, 50-63.
3
Moghaddam, T., & Neishabouri, N. B. (2017, October). On the Active and Passive Flow Separation Control Techniques over Airfoils. In IOP Conference Series: Materials Science and Engineering (Vol. 248, No. 1, p. 012009). IOP Publishing.
4
Behboodi, A., & Salehi, S. (2017, October). SDRE controller for motion design of cable-suspended robot with uncertainties and moving obstacles. In IOP Conference Series: Materials Science and Engineering (Vol. 248, No. 1, p. 012031). IOP Publishing.
5
Hebbal, s., & kumar, a. ergonomic evaluation of low cost adjustable workstation for assembly operation.
6
Maity, P., De, S., Pal, A., & Dhara, P. C. (2016). An experimental study to evaluate musculoskeletal disorders and postural stress of female craftworkers adopting different sitting postures. International Journal of Occupational Safety and Ergonomics, 22(2), 257-266.
7
Sain, M. K., & Meena, M. L. (2016). Occupational health and ergonomic intervention in Indian small scale industries: a review. Int J Recent Adv Mechanical Engin, 5(1), 13-24.
8
Gothsch, T., Richter, C., Beinert, S., Schilcher, C., Schilde, C., Büttgenbach, S., & Kwade, A. (2016). Effect of cavitation on dispersion and emulsification process in high-pressure microsystems (HPMS). Chemical Engineering Science, 144, 239-248.
9
Aggarwal, A. K., Kumar, S., & Singh, V. (2016). Reliability and availability analysis of the serial processes in skim milk powder system of a dairy plant: a case study. International Journal of Industrial and Systems Engineering, 22(1), 36-62.
10
Findorák, R., Fröhlichová, M., Legemza, J., & Findoráková, L. Thermal degradation and kinetic study of sawdusts and walnut shells via thermal analysis. Journal of Thermal Analysis and Calorimetry, 1-6.
11
masturi, m., rustad, s., sunarno, s., & hindarto, n. (2016). solid waste-silica composite for high strength and lightweight material application. jurnal pendidikan fisika indonesia (indonesian journal of physics education), 12(1), 83-89.
12
Sambhe, R. U. Operational Guidelines for Six-Sigma Implementation: Survey of Indian Medium Scale Automotive Industries. World Academy of Science, Engineering and Technology, International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering, 10(1), 184-189.
13
Moumouni, Y., & Baker, R. J. LTspice Model of a Solar Thermoelectric Generation System.
14
Kumar, P. S. V., Jagadamba, P., & Prasad, M. G. Performance Analysis of 4* 4 Circular Patch Phased Array Antenna Using HFSS.
15
Mugisa, D. J., Katimbo, A., Sempiira, J. E., & Kisaalita, W. S. (2016). Anthropometric characteristics of female smallholder farmers of Uganda–Toward design of labor-saving tools. Applied Ergonomics, 54, 177-185.
16
Reddy, E. J., Sridhar, C. N. V., & Rangadu, V. P. (2016). Research and Development of Knowledge Based Intelligent Design System for Bearings Library Construction Using SolidWorks API. In Intelligent Systems Technologies and Applications (pp. 311-319). Springer International Publishing.
17
Sadeghravesh, M. H., Khosravi, H., Abolhasani, A., & Shekoohizadeghan, S. (2016). Evaluation of Combating Desertification Alternatives Using Promethee Model. Journal of Geography and Geology, 8(1), 28.
18
Maré, J. C. (2016). Requirement-based system-level simulation of mechanical transmissions with special consideration of friction, backlash and preload. Simulation Modelling Practice and Theory, 63, 58-82.
19
Wood, N. S., & Jones-Meyer, S. N. (2016). Integrating Automated Toll Discounts into a Real-Time Ridesharing Program. Transportation Research Record: Journal of the Transportation Research Board, (2597), 20-27.
20
Geisbauer, S., & Schmidt, H. (2016). Validation of CFD Airdrop Simulations in the Vortical Wake of an Aircraft with Open Ramp. In New Results in Numerical and Experimental Fluid Mechanics X (pp. 29-38). Springer International Publishing.
21
Zhuoping, cold stroke, bear Lu, Feng Yuan, & minutes and seconds. (2016). Distributed drive an electric car to improve handling direct yaw moment control. Chinese Journal of Mechanical Engineering, 1.
22
Rehman, F., Liu, Y., & Zimmerman, W. B. (2016). The role of chemical kinetics in using O 3 generation as proxy for hydrogen production from water vapour plasmolysis. International Journal of Hydrogen Energy, 41(15), 6180-6192.
23
Mir, S. A., Shah, M. A., & Mir, M. M. (2016). Understanding the Role of Plasma Technology in Food Industry. Food and Bioprocess Technology, 9(5), 734-750.
24
Rohit, K., & Dixit, S. (2016). A Review-Future Aspect of Natural Fiber Reinforced Composite. Polymers from Renewable Resources, 7(2), 43.
25
Bhatia, J. K., Kaith, B. S., & Kalia, S. (2016). Recent Developments in suRface moDification of natuRal fibeRs foR theiR use in biocomposites. Biodegradable Green Composites, 80.
26
Turco, M., Ausiello, A., & Micoli, L. (2016). Fuel Cells Operating and Structural Features of MCFCs and SOFCs. In Treatment of Biogas for Feeding High Temperature Fuel Cells (pp. 31-76). Springer International Publishing.
27
Eveloy, V., Karunkeyoon, W., Rodgers, P., & Al Alili, A. (2016). Energy, exergy and economic analysis of an integrated solid oxide fuel cell–gas turbine–organic Rankine power generation system. International Journal of Hydrogen Energy.
28
Eveloy, V., Karunkeyoon, W., Rodgers, P., & Al Alili, A. (2016). Validation of Solid Oxide Fuel Cell Thermodynamic Models for System-level Integration. Int. J. of Thermal & Environmental Engineering, 11(1), 25-32.
29
Hamad, D., Dhib, R., & Mehrvar, M. (2016). Photochemical Degradation of Aqueous Polyvinyl Alcohol in a Continuous UV/H2O2 Process: Experimental and Statistical Analysis. Journal of Polymers and the Environment, 24(1), 72-83.
30
Pei, H., Xu, H., Xiao, H., Sun, J., Hu, W., Li, X., ... & Jin, Y. (2016). Using a novel hydrogen-terminated porous Si wafer to enhance Microcystis aeruginosa effective removal by chitosan at a low dosage. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 499, 88-96.
31
Xu, H., Pei, H., Xiao, H., Li, X., Ma, C., & Hu, W. (2016). Inactivation of Microcystis aeruginosa by hydrogen-terminated porous Si wafer: Performance and mechanisms. Journal of Photochemistry and Photobiology B: Biology, 158, 23-29.
32
Hamad, D., Dhib, R., & Mehrvar, M. (2016). Effects of hydrogen peroxide feeding strategies on the photochemical degradation of polyvinyl alcohol. Environmental Technology, 1-12.
33
Dixit, D., Verma, A., Gupta, S., & Bansal, P. (2016). Assessment of solar photocatalytic degradation and mineralization of amoxicillin trihydrate (AMT) using slurry and fixed-bed batch reactor: efficacy of parabolic trough collector. RSC Advances, 6(42), 36109-36117.
34
Leester-Schädel, M., Lorenz, T., Jürgens, F., & Richter, C. (2016). Fabrication of Microfluidic Devices. In Microsystems for Pharmatechnology (pp. 23-57). Springer International Publishing.
35
Goswami, U., Sadhu, P. K., & Chakraborty, S. (2016). Enhancement of controllability to improve the transient performance for captive power plant in islanding condition: A case of study. International Journal of Electrical Power & Energy Systems, 83, 188-202.
36
Mir, M., Hassanin, A., & Al-Saleh, M. A. (2016). Identification of Promising Infant Clusters to Obtain Improved Block Layout Designs. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10(3), 410-415.
37
Eshtay, M., Sliet, A., & Sharieh, A. NMVSA Greedy Solution for Vertex Cover Problem. vertex, 2, 15.
38
Hamid, A. B. A., Wahab, M. H. A., Alias, A., & Rahmat, N. (2016). Ablution Design: The Concepts and Design Criteria. In Proceedings of the 2nd International Colloquium of Art and Design Education Research (i-CADER 2015) (pp. 487-496). Springer Singapore.
39
Maity, P., De, S., Pal, A., Mahata, H., Chatterjee, M., & Dhara, P. C. (2016). Identification of a suitable working posture for female workers engaged in golden thread work. International Journal of Occupational Safety and Health, 4(2), 24-33.
40
Montazer, E., Mirzaei, M., Salami, E., Ward, T. A., Romli, F. I., & Kazi, S. N. (2016, October). Optimization of a synthetic jet actuator for flow control around an airfoil. In IOP Conference Series: Materials Science and Engineering (Vol. 152, No. 1, p. 012023). IOP Publishing.
41
Mughal, u. a., saleem, m. a., safeer, a., usman, a., & nauman, k. (2015). Characterization of ferrocement panels reinforced with polypropylene mesh. science international, 27(4).
42
Szénási, S., & Jankó, D. (2015). A Method to Identify Black Spot Candidates in Built-up Areas. Journal of Transportation Safety & Security, (just-accepted).
43
Sutrisno, A., Gunawan, I., Khorshidi, H. A., & Tangkuman, S. (2015). A new modified FMEA model for ranking the risk of maintenance waste considering hierarchy of root causes and effects. International Journal of Quality Engineering and Technology, 5(3-4), 217-237.
44
Rahman, R., Morshed, K. M., Sabrin, S., & Rahman, M. M. Wideband Planar Monopole Antenna for LTE, GSM, Bluetooth, WiMAX, DCS, PCS, and GPS Mobile Terminals.
45
Aggarwal, A. K., Kumar, S., Singh, V., & Garg, T. K. (2015). Markov modeling and reliability analysis of urea synthesis system of a fertilizer plant. Journal of Industrial Engineering International, 11(1), 1-14.
46
Manhas, P., & Soni, M. K. ber analysis of bpsk, qpsk & qam based ofdm system using simulink.
47
Avila, J., & Thenmozhi, K. (2015). Authentication scheme to combat a primary user emulation attack against cognitive radio users. Security and Communication Networks, 8(18), 4242-4253.
48
Saleeb, N. (2015). Effects of the differences between virtual and physical perception of space on Building Information Modelling. Building Information Modelling (BIM) in Design, Construction and Operations, 149, 21.
49
Jahanandish, m., & azan, d. (2015). three-dimensional analysis of bearing capacity of square footings on convex slopes by finite element method. iranian journal of science and technology transactions of civil engineering, 39, 511-522.
50
Ayodeji, S. P., Osayi, R. I., & Akinnuli, B. O. (2015). Ergonomic Evaluation of Post Biomechanical Effects of Lifting Maximum Loads Using Male Subjects. British Journal of Applied Science & Technology, 7(3).
51
Radhika, n., vijaykarthik, k., & shivaram, p. (2015). adhesive wear behaviour of aluminium hybrid metal matrix composites using genetic algorithm. Journal of Engineering Science and Technology, 10(3), 258-268.
52
Tamizi, M., Izman, S., Shirdar, M. R., Al-Mayyahi, N. N., & Parhizkar, S. (2015). Predicting Micro-Hardness of Post-Treated Hydroxyapatite Layer Using Surface Response Methodology. Journal of Soft Computing and Decision Support Systems, 2(1), 1-7.
53
Leitao, Á., & Oosterlee, C. W. (2015). GPU Acceleration of the Stochastic Grid Bundling Method for Early-Exercise options. International Journal of Computer Mathematics, (just-accepted), 1-25.
54
Adeyemi, O. H., adejuyigbe, s. b., ismaila, O. S., & Adekoya, A. F. (2015). Low back pain assessment application for construction workers. Journal of Engineering, Design and Technology, 13(3).
55
Logaraj, M., Madhupriya, V., & Hegde, S. K. (2015). Computer vision syndrome and associated factors among medical and engineering students in Chennai. Annals of medical and health sciences research, 4(2), 179-185.
56
Ayodeji, S. P., Idada, O. R., & Akinnuli, B. O. Ergonomic Evaluation of Post Biomechanical Effects of Lifting Maximum Loads Using Male.
57
Hrženjak, R., Doležal, K., & Ujevic, D. (2015). Sizing system for girls aged 13–20 years based on body types. Textile Research Journal, 85(12), 1293-1304.
58
Virgala, I., Kelemen, M., Lipták, T., & Prada, E. (2015). Stepper Motor Control by ATMEL AVR Microcontroller. Applied Mechanics & Materials, 816.
59
Virgala, I., Kelemen, M., Gmiterko, A., & Lipták, T. (2015). Control of Stepper Motor by Microcontroller. Journal of Automation and Control, 3(3), 131-134.
60
Mostafa, T. S., & Talaat, H. (2015). Intelligent Geographical Information System for Commercial Vehicle Routing (IGIS-VR): A Simulation Base Evaluation Model. Journal of Traffic and Logistics Engineering Vol, 3(2).
61
Mltali patil, D. J., khandekar, S., & yadav, S. (2015).Effect of reinforcement orientation on compressive strength of ferrocement and bitumen ferrocement.
62
Singh, V., Bansal, P. P., & Kumar, M. (2015). Experimental studies on strength and ductility of ferrocement jacketed RC beam-column joints. International Journal of Civil & Structural Engineering, 5(3), 199-205.
63
Nehra, V., & Sehgal, R. (2015). Symbolic Computation ofMathematical Transforms and Its Application: A MATLAB Computational Project-Based Approach. IUP Journal of Electrical and Electronics Engineering, 8(1), 53.
64
Taghadosi, M., Albasha, L., Qaddoumi, N., & Ali, M. (2015). Miniaturised printed elliptical nested fractal multiband antenna for energy harvesting applications. Microwaves, Antennas & Propagation, IET, 9(10), 1045-1053.
65
Shaalan, A. B. (2015). Fractal Minkowski Antenna Loaded with Hilbert Curve as Complementary Split Ring Resonator.
66
Project., & Speaking, the hair. (2015). Analytical models for embedded system design geometry-free components. Professor of Mechanical Engineering, 15 (13), 10-14.
67
Qian, Z., & Bi, Z. (2015). Recent Development of Rehabilitation Robots. Advances in Mechanical Engineering, 7(2), 563062.
68
Maity, P., Pal, A., & Dhara, P. C. (2015). Evaluation of Work Related Musculoskeletal Disorder and Postural Stress of Brick Kiln Workers during Performing Different Brick Making Tasks.
69
Ayodeji, S. P., Osayi, R. I., & Akinnuli, B. O. (2015). Ergonomic Evaluation of Post Biomechanical Effects of Lifting Maximum Loads Using Male Subjects. British Journal of Applied Science & Technology, 7(3).
70
Ismail, n., neoh, s., sabani, n., & taib, b. (2015). microneedle structure design and optimization using genetic algorithm. Journal of Engineering Science and Technology, 10(7), 849-864.
71
Hassan, H., & Harmand, S. (2015). Effect of rotation speed on the temperature of starter alternator machine. Heat and Mass Transfer, 1-8.
72
Gothsch, T., Schilcher, C., Richter, C., Beinert, S., Dietzel, A., Büttgenbach, S., & Kwade, A. (2015). High-pressure microfluidic systems (HPMS): flow and cavitation measurements in supported silicon microsystems. Microfluidics and Nanofluidics, 18(1), 121-130.
73
Sochi, T. (2015). Fluid flow at branching junctions. International Journal of Fluid Mechanics Research, 42(1).
74
Hutli, e., gottlasz, v., farkas, i., ézsöl, g., & baranyai, g. investigation of mixing coolant in a model of reactor vessel down-comer and in cold leg inlets using piv, lif, and cfd techniques.
75
Upasana, D., Gupta, N., & Goyal, Y. K. Availability Of A Complex System Using MATLAB & Comparison.
76
Hossain, M. E., & Al-Majed, A. A. (2015). Drilling Fluids. Fundamentals of Sustainable Drilling Engineering, 73-139.
77
Dureisseix, D., Royer, P., & Faverjon, B. (2015). Numerization of a memory effect for an homogenized composite material with a large contrast in the phase thermal conductivities. International Journal of Heat and Mass Transfer, 90, 140-148.
78
Zamani, N., Bondino, I., Kaufmann, R., & Skauge, A. (2015). Effect of porous media properties on the onset of polymer extensional viscosity. Journal of Petroleum Science and Engineering, 133, 483-495.
79
Viviani, A., & Pezzella, G. (2015). Launchers: Present and Future. In Aerodynamic and Aerothermodynamic Analysis of Space Mission Vehicles (pp. 767-867). Springer International Publishing.
80
Alalfy, H. R., & Abo-Hegazy, S. R. E. (2015). A Suggested Proposal to Implementation Quality Management System ISO-9001 in Egyptian Universities. American Journal of Educational Research, 3(4), 483-489.
81
Sittisun, P., Tippayawong, N., & Wattanasiriwech, D. (2015). Thermal Degradation Characteristics and Kinetics of Oxy Combustion of Corn Residues. Advances in Materials Science and Engineering, 2015.
82
Sethi, R. K., & Goel, A. (2015). Performance Analysis of Optical Communication System using OFDM by Employing QPSK Modulation. International Journal on Recent and Innovation Trends in Computing and Communication (IJRITCC), 3(1), 226-237.
83
Sethi, R., & goel, A.Dispersion compensation in optical communication system by employing 16-qam modulation using ofdm.
84
Sunil, S. Evaluation of Convective Heat Transfer Coefficient of Air Flowing Through an Inclined Square Duct.
85
Jo, B. W., Chakraborty, S., & Kim, H. (2015). Prediction of the curing time to achieve maturity of the nano cement based concrete using the Weibull distribution model. Construction and Building Materials, 84, 307-314.
86
Vickers, L., van Riessen, A., & Rickard, W. D. (2015). Fire-Resistant Geopolymers: Role of Fibres and Fillers to Enhance Thermal Properties. Springer.
87
Oluwole, A. S., & Srivastava, V. M. (2015, November). Modeling of RF security system using smart antennas. In Cyberspace (CYBER-Abuja), 2015 International Conference on (pp. 118-122). IEEE.
88
Oluwole, A. S., & Srivastava, V. M. (2015, December). Design of smart antenna using waveguide-fed pyramidal horn antenna for wireless communication systems. In 2015 Annual IEEE India Conference (INDICON) (pp. 1-5). IEEE.
89
Salles, J. L. M., De Azevedo, R. C., & De Tomi, G. (2015, January). Elaboration of Reservoir Simulation Software for Academic Purpose. In Materials Science Forum (Vol. 805, pp. 409-414).
90
Rahman, M. S., Mahmud, M. A., Pota, H. R., & Hossain, M. J. (2015). A multi-agent approach for enhancing transient stability of smart grids. International Journal of Electrical Power & Energy Systems, 67, 488-500.
91
Frimpong, E. A., Asumadu, J., & Okyere, P. Y. Speed deviation and multilayer perceptron neural network based transient stability status prediction scheme.
92
Gaval, V. R., & Iyer, P. B. Application of DFMEA in Metal to Plastic Replacements in Automotive Industry.
93
Laaroussi, Y., Guennoun, Z. E., & Amar, A. New Hybrid Method to Model Extreme Rainfalls.
94
Sabrin, S., & Rahman, M. M. (2015, May). Wearable antenna with low SAR for 2.45 GHz wireless medical devices and analysis of the effect of different spacing introduced. In Electrical Engineering and Information Communication Technology (ICEEICT), 2015 International Conference on (pp. 1-6). IEEE.
95
Kenny, S., & Jukes, P. (2015). Pipeline/Soil Interaction Modeling in Support of Pipeline Engineering Design and Integrity. Oil and Gas Pipelines: Integrity and Safety Handbook, 99-142.
96
Sabrin, S., & Rahman, M. M. (2015, May). High gain on-body planar antenna with complete ground plane for 5.5 GHz wireless medical devices. In Electrical Engineering and Information Communication Technology (ICEEICT), 2015 International Conference on (pp. 1-6). IEEE.
97
In, I. (2015). J. Avila and K. Thenmozhi. Asian Journal of Scientific Research, 8(3), 324-332.
98
Avila, J., & Thenmozhi, K. (2015). Error Control Code Based Resistance against Primary User Emulation Attack in Cognitive Radio.
99
Ghormade, P. B., & Shah, J. J. (2015, March). Approach to perform horizontal and vertical handoff in wireless network. In Computer Engineering and Applications (ICACEA), 2015 International Conference on Advances in (pp. 812-815). IEEE.
100
Azan, IN., World-sighted, m., A hero, a., & Arslan. (2015). Effect of Soil Slopes Mas·hyy radius of curvature on the convex bearing capacity of foundations located in their plan. Civil Engineering, 31 (2.2), 47-55.
101
Kanna, P. R., Taler, J., Anbumalar, V., Santhosh Kumar, A. V., Pushparaj, A., & Christopher, D. S. (2015). Conjugate Heat Transfer from Sudden Expansion Using Nanofluid. Numerical Heat Transfer, Part A: Applications, 67(1), 75-99.
102
Gan, C., Sahari, K. S. M., & Tan, C. (2015). Numerical investigation on Coanda flow over a logarithmic surface. Journal of Mechanical Science and Technology, 29(7), 2863-2869.
103
Bauer, M. Design and Application of a Fluidic Actuator System for High-lift Flow Control.
104
Arjun, V., Kumar, C., Narendra, M., & Vinay, G. (2015). Solar Assisted Refrigeration System.
105
Sabiha, M. A., Saidur, R., Mekhilef, S., & Mahian, O. (2015). Progress and latest developments of evacuated tube solar collectors. Renewable and Sustainable Energy Reviews, 51, 1038-1054.
106
Jimenez Borges, R., Madrigal Monzon, J. A., & Hair Eras, J. J. (2015). Selecting a solar collector to increase the temperature of the feedwater to the steam generator at the University of Cienfuegos. University and Society Magazine, 7 (2), 64-71.
107
Abdeen, M. A. M., Abdin, A. E. D., & Abbas, W. (2015). Simulation and prediction for energy dissipaters and stilling basins design using artificial intelligence technique. Cogent Engineering, 2(1), 1018705.
108
Mizrahi, J. (2015). Mechanical Impedance and Its Relations to Motor Control, Limb Dynamics, and Motion Biomechanics. Journal of medical and biological engineering, 35(1), 1-20.
109
Coyte, J. L., Stirling, D., Du, H., & Ros, M. Seated Whole-Body Vibration Analysis, Technologies, and Modeling: A Survey.
110
Nagar, B. G., & Anandaraju, M. B. (2015). Person Detection Using Image Covariance Descriptor.
111
Farhanah, A. N., & Bahak, M. Z. (2015). Engine oil wear resistance. Jurnal Tribologi, 4, 10-20.
112
Nuraliza, N., Syahrullail, S., & Musa, M. N. (2015).Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75(11).
113
Syahrullail, S., & Nuraliza, N. (2015, January). Effect of Surface Roughness Parameters and Surface Texture for Reduced Friction. In Applied Mechanics and Materials (Vol. 695, pp. 572-575).
114
Sahu, K., & Sinha, R. Survey On Acoustic Echo Cancellation Based On Adaptive Filter.
115
Pwint, E. G., Mon, S. S. Y., & Tun, H. M. Design And Simulation Of An Acoustic Echo Cancellation System For Hand-Free Telecommunication.
116
Wang, Y. (2015). Ultimate strength and mechano-electrochemical investigations of steel marine structures subject to corrosion (Doctoral dissertation, University of Southampton).
117
Pandey, S. R., & Panda, K. C. (2015). Semantic solutions for the digital libraries based on semantic web technologies. Annals of Library and Information Studies (ALIS), 61(4), 286-293.
118
Malik, K. R., Ahmad, T., Farhan, M., Aslam, M., Jabbar, S., Khalid, S., & Kim, M. (2015). Big-data: transformation from heterogeneous data to semantically-enriched simplified data. Multimedia Tools and Applications, 1-21.
119
Geetharani, S., & Priyadharshini, S. (2015). A Survey on Web Usage Mining. International Journal of Emerging Trends in Science and Technology, 2(03).
120
Bhuiyan, T. H., & Hossain, M. S. J. (2015). University hall furniture design based on anthropometry: an artificial neural network approach. International Journal of Industrial and Systems Engineering, 20(4), 469-482.
121
Chandra, A., Chandna, P., Deswal, S., Mishra, R. K., & Kumar, R. StaturePrediction Model Based On Hand Anthropometry.
122
Mali, S. C., & Vyavahare, R. T. An Ergonomic Evaluation of an Industrial Workstation: A Review.
123
Hossain, M., Muslima, U., & Islam, H. (2015). Security Analysis of Wireless Sensor Network. network, 2(1).
124
Takawira, S. (2015). A case study of the impact of human factors to implementation of ISO 9000 in a manufacturing SME in South Africa (Doctoral dissertation).
125
Anholon, R., Zoqui, E. J., de Souza Pinto, J., & Novaski, O. (2015). Difficulties Experienced during Implementation of an Adapted Quality Management System in Incubated Companies. Business and Management Research, 4(1), p34.
126
Lisak, A., & Kulinko, E. (2015). The use of open surface water for cooling. Bulletin of Kyiv National University of Technology and Design. Series: Engineering, (5), 49-58.
127
Moumouni, Y., & Baker, R. J. (2015, August). Improved SPICE modeling and analysis of a thermoelectric module. In Circuits and Systems (MWSCAS), 2015 IEEE 58th International Midwest Symposium on (pp. 1-4). IEEE.
128
Naghalakshimi, R., & Jayanthy, S. ARM Based Climate Controlled Wearable Jacket.
129
Moumouni, Y. (2015). designing, building, and testing a solar thermoelectric generation, steg, for energy delivery to remote residential areas in developing regions (Doctoral dissertation, University of Nevada, Las Vegas).
130
Galera, V. L. (2015). Disseny d'un dispositiu d'obtenció d'aigua dolça alimentat per energia solar.
131
Picazo-Rodenas, M. J., Royo, R., & Antonino-Daviu, J. (2015). A New Methodology for Complementary Diagnosis of Induction Motors Based on Infrared Thermography. International Journal on Energy Conversion (IRECON), 3(2), 44-52.
132
Lidiya, P. K., & Banerjee, D. (2015). Analysis on the Design of Two Wheelers in India Keeping Women Drivers in Mind.
133
Mirmohammadi, S. J., Mehrparvar, A. H., Mostaghaci, M., Davari, M. H., Bahaloo, M., & Mashtizadeh, S. (2015). Anthropometric Hand Dimensions in a Population of Iranian Male Workers in 2012. International Journal of Occupational Safety and Ergonomics, (just-accepted), 1-17.
134
Elshourbagy, S. A., & Alzubaidi, Y. A. (2015). Deterministic and Stochastic on Quality Services in the Education and Health Media. Procedia Manufacturing, 3, 3621-3628.
135
Piña, C. R. R., Aguilar, J. L., Cerrada, M., & Altamiranda, J. Integración de Ontologías desde el punto de vista de Minería Ontológica y del Paradigma de Arquitecturas Orientadas a Servicios.
136
Tayyab, K., Malik, F. M., & Sheikh, S. A. (2015). SAMPLED DATA CONTROL OF BLDC MOTOR USING SMC AND FUZZY CONTROLLER AND COMPARING THEIR PERFORMANCE. Science International, 27(3).
137
El-Mashade, M. B., Abdelnaiem, A. E., El-Deeb, W. S., & Tawfik, N. I. Analysis of Weak and Strong Fiber Bragg Grating.
138
Tawfik, N. I., Eldeeb, W. S., El_Mashade, M. B., & Abdelnaiem, A. E. Optimization of Uniform Fiber Bragg Grating Reflection Spectra for Maximum Reflectivity and Narrow Bandwidth.
139
Gupta, S., & Singla, E. Evolutionary Robotics in two decades-a review.
140
Ayodeji, S. P., Mpofu, K., Matsebe, O., & Olayinka Olabanji, M. (2015). A control system for a poundo yam flour processing plant. African Journal of Science, Technology, Innovation and Development, 7(3), 192-200.
141
Nyadanu, D., Opoku-Agyeman, M. O., & Asiedu-Darko, E. (2015). Survey of diversity and production of yams in four communities in Southern Ghana. African Journal of Agricultural Research, 10(24), 2453-2459.
142
Rahil, A. (2015). Gestion du Handover dans les réseaux hétérogènes mobiles et sans fil (Doctoral dissertation, Université de Bourgogne).
143
Sharma, M. (2015). Fuzzy Logic Tool for Imprecise Information in Wireless Communication-Another Perspective. database, 3(1).
144
Tillapart, P., Thumthawatworn, T., Viriyaphol, P., & Santiprabhob, P. (2015, June). Intelligent handover decision based on fuzzy logic for heterogeneous wireless networks. In Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 2015 12th International Conference on (pp. 1-6). IEEE.
145
Djojodihardjo, H., Ahmed, R. I., Abu-Talib, A. R., & Mohd-Rafie, A. S. analyical and cfd visualization studies of coanda mav.
146
Lowery, A. D., Arnold, A. M., & Smith, J. E. Meeting And Taking Advantage Of The Market Challenges For The Future Of Wind Power.
147
Behnamfar, F., Dorafshan, S., Taheri, A., & Hosseini Hashemi, B. (2015). A method for rapid estimation of dynamic coupling and spectral responses of connected adjacent structures. The Structural Design of Tall and Special Buildings.
148
Jadhav, G. K., Ghanegaonkar, P. M., & Garg, M. S. (2015). Performance Charecteristics of Turbo Ventilator: A Review. IJITR, 3(4), 2276-2282.
149
Emmanuel, A. C., & Inyiama, H. C. (2015). A SURVEY OF CONTROLLER DESIGN METHODS FOR A ROBOT MANIPULATOR IN HARSH ENVIRONMENTS. European Journal of Engineering and Technology Vol, 3(3).
150
GIWA, A., ADEYI, A. A., & GIWA, S. O. (2015). Empirical Modelling and Optimization of PAME Reactive Distillation Process Using Minitab. International Journal of Scientific & Engineering Research, 6(6), 538-548.
151
GIWA, A., & GIWA, S. O. (2015). Cascade-Forward Neural Network Modelling of a Biodiesel Reactive Distillation Process. International Journal of Scientific & Engineering Research, 6(5), 837-849.
152
Hartantyo, E., Brotopuspito, K. S., & Sismanto, W. (2015, April). Predicting the liquefaction phenomena from shear velocity profiling: Empirical approach to 6.3 Mw, May 2006 Yogyakarta earthquake. in 4th international symposium on earthquake and disaster mitigation 2014 (ISEDM 2014) (Vol. 1658, p. 030017). AIP Publishing.
153
Shakerkhatibi, M., Mohammadi, N., Zoroufchi Benis, K., Behrooz Sarand, A., Fatehifar, E., & Asl Hashemi, A. (2015). Using ANN and EPR models to predict carbon monoxide concentrations in urban area of Tabriz. Environmental Health Engineering and Management Journal, 2(3), 117-122.
154
Jaiyeola, A. T., & Bwapawa, J. K. (2015).Dynamics of sedimentation and use of genetic algorithms for estimating sediment yields in a river: a critical review. natural resource modeling.
155
Tuna, B., & Behret, H. (2015). Alliance Management Process Design with Failure Mode and Effect Analysis. In Modelling and Management of Engineering Processes (pp. 163-174). Springer Berlin Heidelberg.
156
Lancaster Jr, J. P. (2015).Predicting the behavior of robotic swarms in discrete simulation (Doctoral dissertation, Kansas State University).
157
Omer, S. E., & Alzubaidi, A. J. Programmed Oxygen Delivery System.
158
Sharma, T. K., Parihar, P., & Kemkar, P. M. M. (2015, April). All sky scanning cloud monitor for NLOT site survey. In Journal of Physics: Conference Series (Vol. 595, No. 1, p. 012032). IOP Publishing.
159
Turkane, s. m., & dhawan, a. a. research article issn: 2321-7758.
160
Romeika, g. (2015). koncepcinis smulkaus ir vidutinio verslo subjekto vertes kurimo grandines vertinimo modelis naudojant daugiakriterio vertinimo principus. science & processes of education/mokslas ir edukaciniai procesai, (1).
161
Fodor, r. s., & arghir, m. (2015). contributions to the biomechanics study of human calf foot. acta technica napocensis-series: applied mathematics, mechanics, and engineering, 58(4).
162
Alomair, Y., Ahmad, I., & Alghamdi, A. (2015). A Review of Evaluation Methods and Techniques for Simulation Packages. Procedia Computer Science, 62, 249-256.
163
Lowery, A. D., Arnold, A. M., & Smith, J. E. Meeting And Taking Advantage Of The Market Challenges For The Future Of Wind Power.
164
Kumar, U., & Dohare, D. (2015). Separately Excited DC Motor Speed control of using various Tuning Conventional Controllers.
165
Retfalvi, A., & Stampfer, M. (2015, September). Aspects of the use and automatic modification of extra locator elements of modular fixtures. In Intelligent Systems and Informatics (SISY), 2015 IEEE 13th International Symposium on (pp. 73-77). IEEE.
166
Samotu, I. A., Anafi, F. O., Dauda, M., Ahmed, A. S., Bako, R. B., & Obada, D. O. (2015). Modelling and finite element analysis of turning tables of micro-controller based versatile machine tools desktop learning module. World Journal of Engineering, 12(5), 489-498.
167
Khalate, S., & Kulkarni, S. Finite Element Analysis of Bolted Conne.
168
Samotu, I. A., Anafi, F. O., Dauda, M., Ahmed, A. S., Bako, R. B., & Obada, D. O. (2015). finite element analysis of 3d-model of turning tables of micro-controller based versatile machine tools desktop learning module. Acta Technica Corviniensis-Bulletin of Engineering, 8(4), 43.
169
Macho, M., & Ryjá?cek, P. (2015, October). The impact of the severe corrosion on the structural behaviour of steel bridge members. In Advances and Trends in Engineering Sciences and Technologies: Proceedings of the International Conference on Engineering Sciences and Technologies, 27-29 May 2015, Tatranská Štrba, High Tatras Mountains-Slovak Republic
170
Osman, A. A., & Aly, A. M. B. (2015). Investigation of the effect of grid size on external store separation trajectory using CFD. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9(4), 613-619.
171
Gremmoa, S., Antonikb, I., Corsoa, P., Hirschb, C., & Coussementa, G. Partial remeshing strategy for CFD simulations when large displacements of moving bodies are taken into account.
172
Li, C., Lien, F. S., Yee, E., & Dong, M. (2015). Numerical modelling of multiphase flow-induced noise and vibration in a poppet valve. International Journal of Vehicle Noise and Vibration, 11(3-4), 273-312.
173
Li, C., Lien, F. S., Yee, E., & Dong, M. (2015). Multiphase Flow Simulations of Poppet Valve Noise and Vibration (No. 2015-01-0666). SAE Technical Paper.
174
Jennifer Zeng, Wang Gang, & YE Zheng-yin. (2015). Weigang ox whole morphing technology and multi-body simulation trajectory. Aerodynamics Sinica, 33 (2).
175
Yusoff, T. A. F. K., Atan, M. F., Rahman, N. A., Salleh, S. F., & Wahab, N. A. (2015). Optimization of PID Tuning Using Genetic Algorithm. Journal of Applied Science & Process Engineering, 2(2).
176
Zhou, L., Li, J., Li, Z., & Fu, L. (2015). High Speed Motion Control System With Predictive Observer and Its Parameters Optimization. Appl. Math, 9(2), 777-787.
177
Admuthe, S., & Chile, R. (2015). Neuro–fuzzy–based hybrid controller for stable temperature of liquid in heat exchanger. International Journal of Computational Science and Engineering, 10(1-2), 220-230.
178
Aniza, N., Hassan, S., Nor, M. F. M., Kee, K. E., & Aklilu, T. (2015). investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76(5).
179
Akande, S. A., & Ajisegiri, G. O. Performance Measure of Multipurpose Machine From Single Machine Units.
180
Akande, S., Oluleye, A. E., & Oyetunji, E. O. (2015, March). On the reducibility of multicriteria scheduling problems to bicriteria scheduling problems. In Industrial Engineering and Operations Management (IEOM), 2015 International Conference on (pp. 1-8). IEEE.
181
Marichelvam, M. K., & Prabaharan, T. (2015). Solving realistic industrial scheduling problems using a multi–objective improved hybrid particle swarm optimisation algorithm. International Journal of Operational Research, 23(1), 94-129.
182
Gupta, B. Comparative Study of Genetic Operators and Parameters for Multiprocessor Task Scheduling.
183
adhi, a. (2015). Model sistem perencanaan produksi terintegrasi di industri percetakan. jurnal ilmiah dinamika teknik, 8(1).
184
Borges, RJ, Monsoon, JAM, & Eras, cjjc selecting a solar collector to increase water temperature power to steam generator of the university of cienfuegos the selection of a solar collector to increase the temperature of the water supply to the steam generator at the university of cienfuegos. editorial council, 64.
185
Bayimissa, K. D. M. (2015). Characterisation of radiation effects on power system components for cubesats (Doctoral dissertation, Cape Peninsula University of Technology).
186
Zille, A., Oliveira, F. R., & Souto, A. P. (2015). Plasma treatment in textile industry. Plasma Processes and Polymers, 12(2), 98-131.
187
Schnabel, U., Niquet, R., Schlüter, O., Gniffke, H., & Ehlbeck, J. (2015). Decontamination and sensory properties of microbiologically contaminated fresh fruits and vegetables by microwave plasma processed air (PPA). Journal of Food Processing and Preservation, 39(6), 653-662.
188
Maurya, M. R., Saini, N., & Avecilla, F. (2015). Liquid phase versus microwave assisted selective oxidation of volatile organic compounds involving dioxidomolybdenum (VI) and oxidoperoxidomolybdenum (VI) complexes as catalysts in the presence/absence of an N-based additive. Polyhedron, 90, 221-232.
189
Agon, N. (2015). Development and study of different numerical plasma jet models and experimental study of plasma gasification of waste (Doctoral dissertation, Ghent University).
190
Chen, M., Zhang, R., Tang, L., Zhou, X., Li, Y., & Yang, X. Development of an industrial applicable dielectric barrier discharge (DBD) plasma treatment for improving bondability of poplar veneer. Holzforschung.
191
Schnabel, U., Sydow, D., Schlüter, O., Andrasch, M., & Ehlbeck, J. Decontamination of Fresh-Cut Iceberg Lettuce and Fresh Mung Bean Sprouts by Non-Thermal Atmospheric Pressure Plasma Processed Water (PPW).
192
Abbasi, H., Nazeri, M., Mirpour, S., & Farahani, N. J. (2015, November). Measuring electron density, electric field and temperature of a micro-discharge air plasma jet using optical emission spectroscopy. In 2015 2nd International Conference on Knowledge-Based Engineering and Innovation (KBEI) (pp. 1139-1141). IEEE.
193
Mouele, E. S. M., Tijani, J. O., Fatoba, O. O., & Petrik, L. F. (2015). Degradation of organic pollutants and microorganisms from wastewater using different dielectric barrier discharge configurations—a critical review. Environmental Science and Pollution Research, 22(23), 18345-18362.
194
Mohanty, S., Das, A. K., & Das, S. P. DBD non-thermal Plasma for decomposition of Volatile Organic Compounds.
195
Öngel, C., Keles, M., Acar, E., & Birer, Ö. (2015). Atmospheric Pressure Plasma Jet Treatment of Human Hair Fibers. Journal of Bio-and Tribo-Corrosion, 1(1), 1-10.
196
Trinh, Q. H., & Mok, Y. S. (2015). Environmental plasma-catalysis for the energy-efficient treatment of volatile organic compounds. Korean Journal of Chemical Engineering, 1-14.
197
Bastawros, A. F., Chandra, A., & Poosarla, P. A. (2015). Atmospheric pressure plasma enabled polishing of single crystal sapphire. CIRP Annals-Manufacturing Technology, 64(1), 515-518.
198
Samanta, K. K., Basak, S., Chattopadhyay, S. K., & Gayatri, T. N. (2015). 1 Water-Free Plasma. Handbook of Sustainable Apparel Production, 1.
199
Birer, Ö. (2015). Reactivity zones around an atmospheric pressure plasma jet. Applied Surface Science, 354, 420-428.
200
Peng Hanxuan. (2015). NSR catalyst combination of plasma technology of NOx removal. Thesis Environmental Engineering Research Institute, Central University, 1-128.
201
Pavelic, B. (2015). Options use plasma therapy in dentistry: the theoretical basis and clinical application (Doctoral dissertation, University of Zagreb, School of Dental Medicine, Department of Endodontics and Restorative Dentistry.).
202
Mohammadi, A., Irani, S., & Atyabi, S. M. (2015). Study of breast cancer cells inhibition by cold atmospheric plasma. Medical Science Journal of Islamic Azad Univesity-Tehran Medical Branch, 25(2), 125-131.
203
Ghazali, K. (2015). Experimental study of cool microwave plasma at atmospheric pressure generated by high voltages of different shapes (Doctoral dissertation, Pau).
204
Zhunussova, A. S., Orynbayeva, Z. S., & Tuleukhanov, S. T. (2015). The ability of metastatic prostate cancer cell viability studies of the effects of atmospheric low-temperature plasma. The bulletin. Series Bïologïçeskaya, 64 (2/1), 86-93.
205
Shang, I. (2015). The use of atmospheric plasma lithium battery anode material doped with nitrogen to improve its electrical performance. University Department of Materials Science and Engineering Thesis, 1-93.
206
Surendra, I. V., Rao, K. V., & Chandu, K. V. P. P. Nav view search.
207
Surendra, I. V., Rao, K. V., & Chandu, K. V. P. P. Fabrication and Investigation of Mechanical Properties of Sisal, Jute & Okra Natural Fiber Reinforced Hybrid Polymer Composites.
208
Okonkwo, I. E. (2015). Momordica Angustisepala as Reinforcement in Polymer Composites.
209
Giwa, A., Giwa, S. O., & Adeyi, A. A. (2015). Dynamics and Servo Control of Biodiesel Purity from a Reactive Distillation Process. International Journal of Scientific & Engineering Research, 6(8), 146-156.
210
Giwa, A., & Giwa, S. O. (2015). ARX and ARMAX Modelling of olefin metathesis reactive distillation process. Advances in Applied Science Research, 6(9), 42-52.
211
GIWA, S. O., ADEYI, A. A., & GIWA, A. (2015). Dynamics and Regulatory Control of Biodiesel Purity from a Reactive Distillation Process. International Journal of Engineering Research and General Science, 3(5), 371-381.
212
GIWA, A., & Giwa, S. O. (2015). Effects of Feed Stage on the Product Composition of a Reactive Distillation Process: A Case Study of trans-2-Pentene Metathesis. Effects of Feed Stage on the Product Composition of a Reactive Distillation Process: A Case Study of trans-2-Pentene Metathesis, 3(10), 1248-1256.
213
Giwa, A., & Giwa, S. O. Olefin metathesis reactive distillation process dynamics with respect to product temperatures.
214
GIWA, A., & GIWA, S. O. Modelling and Simulation of a Reactive Distillation Process for Fuel Additive Production.
215
Giwa, A., & Giwa, S. O. Effects of feed ratio on the product quality of SAME reactive distillation process.
216
GIWA, A., & GIWA, S. O. (2015). Dynamics and Tyreus-Luyben Tuned Control of a Fatty Acid Methyl Ester Reactive Distillation Process. Dynamics and Tyreus-Luyben Tuned Control of a Fatty Acid Methyl Ester Reactive Distillation Process, 3(5), 799-808.
217
Buonomano, A., Calise, F., d’Accadia, M. D., Palombo, A., & Vicidomini, M. (2015). Hybrid solid oxide fuel cells–gas turbine systems for combined heat and power: A review. Applied Energy, 156, 32-85.
218
Jia, Z., Sun, J., Dobbs, H., & King, J. (2015). Feasibility study of solid oxide fuel cell engines integrated with sprinter gas turbines: Modeling, design and control. Journal of Power Sources, 275, 111-125.
219
Shokati, N., Ranjbar, F., & Mohammadkhani, F. (2015). Comparison of Single-stage and Two-stage Tubular SOFC-GT Hybrid Cycles: Energy and Exergy Viewpoints. International Journal of Engineering-Transactions A: Basics, 28(4), 618.
220
Sednin, VA, Chichko, AA, Manego, SA, boom, A., cornet, IA, Trofimov, V., & ... Romanyuk, V. N. (2015). Estimation of the importance factors of influence on the thermodynamic efficiency of the solid oxide fuel cells. Energy, (6), 87-97.
221
Farzad, M. A., & Hassanzadeh, H. (2015). Modeling and optimization of a single planar solid oxide fuel cell. Modares Mechanical Engineering, 15(2).
222
Prasad, B., & Chakradhar, D. M. D. S. The study of sloshing performance in three dimensional tanks for different volume fraction of fluid with time increment step and acceleration with cfd approach.
223
Dong, C. (2015). Modeling and simulation of sloshing motion in partly filled tank.
224
Archer, P. J., & Bai, W. (2015). A new non-overlapping concept to improve the Hybrid Particle Level Set method in multi-phase fluid flows. Journal of Computational Physics, 282, 317-333.
225
PREDZYMIRSKA, LM (2015). Cavitation of natural and waste waters from organic and biological contaminants (Doctoral dissertation, National University "Lviv Polytechnic).
226
Belkheiri, D., Fourcade, F., Geneste, F., Floner, D., Aït-Amar, H., & Amrane, A. (2015). Combined process for removal of tetracycline antibiotic–Coupling pre-treatment with a nickel-modified graphite felt electrode and a biological treatment. International Biodeterioration & Biodegradation, 103, 147-153.
227
Hernández-Ramírez, A., & Medina-Ramírez, I. (2015). Future and Perspectives for Photocatalytic Materials in Environmental Photocatalysis. In Photocatalytic Semiconductors (pp. 279-285). Springer International Publishing.
228
Le, H. N., Babick, F., Kühn, K., Nguyen, M. T., Stintz, M., & Cuniberti, G. (2015). Impact of ultrasonic dispersion on the photocatalytic activity of titania aggregates. Beilstein journal of nanotechnology, 6(1), 2423-2430.
229
Selvabharathi, G., Adishkumar, S., Jenefa, S., Ginni, G., Banu, J. R., & Yeom, I. T. (2015). Combined homogeneous and heterogeneous advanced oxidation process for the treatment of tannery wastewaters. Journal of Water Reuse and Desalination, jwrd2015139.
230
Páramo-Vargas, J., Granados, S. G., Maldonado-Rubio, M. I., & Peralta-Hernández, J. M. Up to 95% reduction of chemical oxygen demand of slaughterhouse effluents using Fenton and photo-Fenton oxidation. Environmental Chemistry Letters, 1-6.
231
Wang, G. (2015). Synthesis and Application of Bleach Activators Containing Various Cationic Groups and PET Fabric Decolorization using Fenton's Reagent.
232
Kousksou, T., Allouhi, A., Belattar, M., Jamil, A., El Rhafiki, T., & Zeraouli, Y. (2015). Morocco's strategy for energy security and low-carbon growth. Energy, 84, 98-105.
233
Poursaeidi, E., & Arhani, M. M. (2015). REverse engineering for designing the coupling of a 32 mw rotor-generator by shrink fitting method (technical note). international journal of engineering-transactions c: aspects, 28(9), 1375.
234
Rao, G. S., Murty, K. S., & Naveen, A. (2015). Food Processing Industrial Effluent Treatment Using FBBR. Food Processing, 5(08).
235
AsumingFrimpong, E. (2015). Prediction of transient stability status and coherent generator groups (Doctoral dissertation, Department of Electrical and Electronic Engineering, Kwame Nkrumah University of Science and Technology).
236
Al-Saleh, M. A., Mir, M., & Hassanin, A. (2015, March). Comparison of enhanced constructive layout optimization technique with Tabu-search and Particle Swarm Optimization methodologies. In Industrial Engineering and Operations Management (IEOM), 2015 International Conference on (pp. 1-7). IEEE.
237
Wijoyo, M. V. (2015). Implementasi sistem manajemen kualitas hotel x dari perspektif iso 9001: 2008. Agora, 3(1), 414-420.
238
SOARES, E. J. O. (2015). Proposta de uma Abordagem para Auxiliar a Implementação do Sistema de Gestão da Qualidade ISO 9001: 2008 em Empresas de Construção Civi.
239
Wagner, C. F. (2015). Improving shock-capturing robustness for higher-order finite element solvers (Doctoral dissertation, Massachusetts Institute of Technology).
240
Gajurel, S., Cleveland, U. S., & Bielefeld, R. (2015, September). Mutated Near Optimal Vertex Cover Algorithm (NOVCA) Visualization on a Tile Display. In Cluster Computing (CLUSTER), 2015 IEEE International Conference on (pp. 525-526). IEEE.
241
Prasanna, N. L., & Sudhakar, N. (2015). Algorithm for Edge Antimagic Labeling for Specific Classes of Graphs.
242
Ghasempour, S. (2015). Automatic License Plate Recognition (ALPR) (Doctoral dissertation, Eastern Mediterranean University).
243
Patil, D. S., & Naik, A. S. Efficient Method for Offline Kannada and English Handwritten Word Recognition.
244
Ayodeji, S. P., Idada, O. R., & Akinnuli, B. O. Ergonomic Evaluation of Post Biomechanical Effects of Lifting Maximum Loads Using Male.
245
Souza, I. T. G., Buski, C. R. B., Batiz, E. C., & Hurtado, A. L. B. (2015). Ergonomic Analysis of a Clothing Design Station. Procedia Manufacturing, 3, 4362-4369.
246
Brar, G. S., & Singh, S. (2014). An Experimental and CFD Analysis of Sloshing in a tanker. Procedia Technology, 14, 490-496.
247
Li, H. T., Li, J., Zong, Z., & Chen, Z. (2014). Numerical studies on sloshing in rectangular tanks using a tree-based adaptive solver and experimental validation. Ocean Engineering, 82, 20-31.
248
Yang Shuo (2014) end to end multi-path technology - next generation "packet switching" technology train signaling system will enhance the availability and reliability of Railway Signal & Communication Engineering and Technology, 11 (3), 107-112.
249
Najafi, B., Shirazi, A., Aminyavari, M., Rinaldi, F., & Taylor, R. A. (2014). Exergetic, economic and environmental analyses and multi-objective optimization of an SOFC-gas turbine hybrid cycle coupled with an MSF desalination system. Desalination, 334(1), 46-59.
250
Das, S. YourSoulis talking to you Listen carefully and you will be able to hear.
251
Rahil, A., Mbarek, N., Togni, O., Atieh, M., & Fouladkar, A. (2014, April). Statistical learning and multiple linear regression model for network selection using MIH. In e-Technologies and Networks for Development (ICeND), 2014 Third International Conference on (pp. 189-194). IEEE.
252
Sikdar, A., Banerjee, S., Roy, P., Mukherjee, S., & Das, M. (2014). Bengali printed character recognition using a feature based chain code method. Advances in Image and Video Processing, 2(3), 01-09.
253
Gómez, Y. Z. O., Montilla, C. A. L., & Rodas, C. F. R. (2014). Herramienta de Entrenamiento Virtual en 2-D para Rehabilitación de Motricidad Fina en Miembro Superior con Incorporación de un Dispositivo Háptico (2-D Virtual Training Tool for Fine Motor Rehabilitation in Upper Limb using a haptic device/Virtual Ferram). Revista Ingeniería Biomédica,
254
Ordoñez, Y. Z., Luna, C. A., & Rengifo?, C. F. Herramienta de Entrenamiento Virtual en 2-D para Rehabilitación de Motricidad Fina en Miembro Superior con Incorporación de un Dispositivo Háptico (software para rehabilitación fina en miembro superior).
255
Dhandapani, K., Vasanthkumar, P., & Nagarajan, S. (2014). A Meta-Heuristic Evolutionary Algorithm to Optimize Machining Parameters in Turning AISI 4340 Steel. Journal of Advanced Engineering Research, 1(2).
256
Margonis, S. (2014). Preliminary design of an autonomous underwater vehicle using multi-objective optimization (Doctoral dissertation, Monterey, California: Naval Postgraduate School).
257
Nayak, B. E. D. A. M. A. T. I. (2014). Multi-response optimization in machining: exploration of TOPSIS and Deng’s similarity based approach (Doctoral dissertation).
258
Gajurel, S., & Bielefeld, R. (2014). A Heuristic Approach to Fast NOVCA (Near Optimal Vertex Cover Algorithm). Computer Technology and Application, 5(2).
259
Ansari, N. A., & Sheikh, M. J. (2014). Evaluation of work Posture by RULA and REBA: A Case Study. IOSR Journal of Mechanical and Civil Engineering, 11(4), 18-23.
260
Meena, M. L., Dangayach, G. S., & Bhardwaj, A. (2014). Measuring quality of work life among workers in handicraft industries of Jaipur. International Journal of Industrial and Systems Engineering, 17(3), 376-390.
261
Kahtan, H., Bakar, N. A., & Nordin, R. (2014). Awareness of embedding security features into component-based software development model: A survey. Journal of Computer Science, 10(8), 1411-1417.
262
Platz, M. (2014). Mathematical Modelling of GIS Tailored GUI Design with the Application of Spatial Fuzzy Logic (Doctoral dissertation, Universität Koblenz-Landau).
263
Singh, V., Bansal, P. P., Kumar, M., & Kaushik, S. K. (2014). Effect of Wire Mesh Orientation on Strength of Exterior RC Beam-Column Joints Retrofitted Using Ferrocement Jackets. International Journal on Emerging Technologies, 5(1), 212.
264
Lopez, I., Aguado, M., & Jacob, E. (2014). End-to-End Multipath Technology: Enhancing Availability and Reliability in Next-Generation Packet-Switched Train Signaling Systems. Vehicular Technology Magazine, IEEE, 9(1), 28-35.
265
Gupta, M. C., & Sharma, L. D. Performance Comparison of Multihop Wireless ADHOC Routing Protocols AODV, OLSR & TORA.
266
Ghorpade, R., Parikh, R., Gholawde, P., Pangare, A., & Chaudhari, M. M. (2014). To Check Tir Of Gears Using Hydro-Pneumatic Intensifier After Heat Treatment. METHODOLOGY, 3(5).
267
Sharma, T. K., & Parihar, P. S. (2014). Network Based Data Acquisition and Logging System using PIC Microcontroller. International Journal of Engineering (IJE), 8(2), 22.
268
ALI, I. A., & NKGupta, E. R. (2014). Enhancing SCADA System for Water Treatment Plant in Tikrit City of Iraq.
269
Gajipara, N. D., & Ahire, P. L. (2014). Design of SCADA for Real Time System with LabVIEW and Microcontroller.
270
Shao, Y., Wang, S., Tan, Z., Luo, Y., & Lai, Y. (2014). Seamless integration of RZ-DQPSK-DWDM optical links with MISO-OFDM-QPSK system for fourth generation wide-area coverage mobile communication. Microwave and Optical Technology Letters, 56(4), 797-801.
271
Pani, S., & Rajawat, A. (2014). A Review on DWDM and MIMO-OFDM comparison. International Journal of Engineering Science & Advanced Technology, 4(1), 10-17.
272
Lakshminarayana, R. (2014). Design and implementation of web based embedded system for mst radar transmitters remote monitor and controller.
273
Thamarai, P., & Amudhevalli, R. (2014). Energy Monitoring System USING PLC & SCADAS. Energy, 3(2).
274
Gao, J., Liu, J., Rajan, B., Nori, R., Fu, B., Xiao, Y., ... & Philip Chen, C. L. (2014). SCADA communication and security issues. Security and Communication Networks, 7(1), 175-194.
275
Hossain 2nd, M. A., & Chowdury 3rd, A. R. Process Control Using Microcontroller.
276
Narayana, R. L., & Raju, K. N. A Review on Web based Embedded System for Remote Monitor and Controller.
277
Rani, V. A., & Sneha, J. A. Boiler Application Using Wireless Bridge between PLC and SCADA.
278
Jusu, T. F. B. (2014). kwame nkrumah university of science and (Doctoral dissertation, Department of Electrical/Electronic Engineering, Kwame Nkrumah University of Science and Technology).
279
Abu-Eishah, S. I., Babahar, H. A. S., & Maraqa, M. (2014). Minimization of SO 2 Emissions at ADGAS (Das Island, UAE): I-Current vs. Modified Schemes. J Pet Environ Biotechnol, 5(173), 2.
280
Shen, Y., & Jin, C. (2014). Water Cooling System Analysis of Permanent Magnet Traction Motor of Mining Electric-Drive Dump Truck (No. 2014-01-0662). SAE Technical Paper.
281
Samami, B. A., Pieper, M., Breitbach, G., & Hodapp, J. (2014). Heat production in the windings of the stators of electric machines under stationary condition. Heat and Mass Transfer, 50(12), 1707-1716.
282
Al-Halhouli, A. A., Demming, S., Alahmad, L., LIobera, A., & Büttgenbach, S. (2014). An in-line photonic biosensor for monitoring of glucose concentrations. Sensors, 14(9), 15749-15759.
283
Daneshi, A., Esmaili Sari, A., Daneshi, M., & Baumann, H. (2014). Energy Assessment in Product Chain of Pasteurized milk: Agronomy, Animal Farm and Processing Plant. ECOPERSIA, 2(3), 697-714.
284
Azadeh, A., Nazari-Shirkouhi, S., Samadi, H., & Nazari-Shirkouhi, A. (2014). An integrated fuzzy group decision making approach for evaluation and selection of best simulation software packages. International Journal of Industrial and Systems Engineering, 18(2), 256-282.
285
Ali, I., Malik, N., & Chanane, B. (2014). Fractional diffusion model for transport through porous media.
286
Ali, I., Malik, N., & Chanane, B. (2014, June). Time-fractional nonlinear gas transport equation in tight porous media: An application in unconventional gas reservoirs. In Fractional Differentiation and Its Applications (ICFDA), 2014 International Conference on (pp. 1-6). IEEE.
287
A. Boys, K., & E. Wilcock, A. (2014). Improving integration of human resources into quality management system standards. International Journal of Quality & Reliability Management, 31(7), 738-750.
288
Shrivastav, M., & Gonnade, S. An Adaptive Leaky-Bucket Mechanism for Traffic Management in OBS Networks.
289
Samudra, S. D., & Gaikwad, S. P. QoS parameters for obs network.
290
Anojkumar, L., Ilangkumaran, M., & Sasirekha, V. (2014). Comparative analysis of MCDM methods for pipe material selection in sugar industry. Expert Systems with Applications, 41(6), 2964-2980.
291
McMains, T. D., Burkhardt, T., & Pratt, R. W. (2014). U.S. Patent No. 8,688,497. Washington, DC: U.S. Patent and Trademark Office.
292
McMains, T. D., Burkhardt, T., & Pratt, R. W. (2014). U.S. Patent No. 8,788,315. Washington, DC: U.S. Patent and Trademark Office.
293
Rodrigues, P. C. C. (2014). Proposta de um modelo matemático para apoio às decisões táticas da gestão da produção.
294
Pratt, R. W. (2014). U.S. Patent No. 8,812,338. Washington, DC: U.S. Patent and Trademark Office.
295
Chandwani, V., Agrawal, V., & Nagar, R. (2014). Applications of Artificial Neural Networks in Modeling Compressive Strength of Concrete: A State of the Art Review.
296
Didouche, Z. (2014). Effet du dosage et du type de superplastifiant sur le comportement calorimétrique des ciments composés (Doctoral dissertation).
297
Singh, A. Optimization of Rectangular Patch Antenna.
298
Karunanithi, A. K., & Hassanipour, F. (2014). Multilayer minichannel heat sinks: The effect of porosity scaling on pressure drop.
299
Karunanithi, A. K., & Hassanipour, F. (2014, August). Heat Sink With Stacked Multi-Layer Porous Media. In ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (pp. V001T05A003-V001T05A003). American Society of Mechanical Eng
300
Sudhakar, T. D. (2014). Sensitivity Factor Based Optimal Location of SVC on Transmission Network. TELKOMNIKA Indonesian Journal of Electrical Engineering, 12(7), 4915-4923.
301
Mirghafouri, S. H., Asadian Ardakani, F., & Azizi, F. (2014). Developing a Method for Risk Analysis in Tile and Ceramic Industry Using Failure Mode and Effects Analysis by Data Envelopment Analysis. Iranian Journal of Management Studies, 7(2), 343-363.
302
Parsana, T. S., & Patel, M. T. (2014). A Case Study: A Process FMEA Tool to Enhance Quality and Efficiency of Manufacturing Industry. Bonfring International Journal of Industrial Engineering and Management Science, 4(3), 145-152.
303
Pullepu, B., Sambath, P., & Viswanathan, K. K. (2014). Effects of Chemical Reactions on Unsteady Free Convective and Mass Transfer Flow from a Vertical Cone with Heat Generation/Absorption in the Presence of VWT/VWC. Mathematical Problems in Engineering, 2014.
304
Ebrahimi, A., Zhu, M., & Beech, J. F. (2014, February). Sequential Excavation for Replacement of a Concrete Culvert underneath a Sanitary Pipeline Using the Observational Method. In Geo-Congress 2014 Technical Papers@ sGeo-characterization and Modeling for Sustainability (pp. 2610-2618). ASCE.
305
Dutta, D., Hira, A., Asjad, F., & Haider, T. I. (2014, December). Compact triple C shaped microstrip patch antenna for WLAN, WiMAX & Wi-Fi application at 2.5 GHz. In Software, Knowledge, Information Management and Applications (SKIMA), 2014 8th International Conference on (pp. 1-4). IEEE.
306
Khare, V., & Ahmed, M. (2014). Review on WHT-DCT-OFDM system for Baseband and wireless Transmission using QAM Modulation over AWGN and Multipath Rayleigh fading Channel. International Journal of Advanced Electronics and Communication Systems, 3(3).
307
Ahmed, M. (2014). Precoded DCT-OFDM system for Baseband and wireless communication using QAM Modulation over AWGN and Multipath Rayleigh fading Channel. International Journal of Research in Engineering and Scientific Applications, 1(1).
308
Avila, J., & Thenmozhi, K. (2014). Let Multiband-OFDM Modified by Wavelet. Indian Journal of Science and Technology, 7(8), 1125-1129.
309
SHARMA, M. (2014).Multi network handover decision using extended multi criteria decision making technique. IU-Journal of Electrical & Electronics Engineering, 14(1), 1755-1760.
310
Omheni, N., Zarai, F., Obaidat, M. S., & Hsiao, K. F. (2014, July). A novel vertical handoff decision making algorithm across Heterogeneous Wireless Networks. In Computer, Information and Telecommunication Systems (CITS), 2014 International Conference on (pp. 1-6). IEEE.
311
Thumthawatworn, T., Pervez, A., & Santiprabhob, P. (2014, May). Dynamically adaptive handover decision mechanism for video streaming in wireless mobile networks. In Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON), 2014 11th International Conference on (pp. 1-6). IEEE.
312
Mostafa, M. M., Elsayed, H. A., & Elramly, S. Seamless Mobility in Heterogeneous Mobile Networks.
313
Kweder, J., Zeune, C. H., Geiger, J., Lowery, A. D., & Smith, J. E. (2014). Experimental Evaluation of an Internally Passively Pressurized Circulation Control Propeller. Journal of Aerodynamics, 2014.
314
Djojodihardjo, H., & Thangarajah, N. (2014). Research, Development and Recent Patents on Aerodynamic Surface Circulation Control-A Critical Review. Recent Patents on Mechanical Engineering, 7(1), 1-37.
315
Miklosovic, D., & Perry, M. PIV Wake Measurements of a Low Aspect Ratio Circulation Control Wing with Spanwise Variation in Efflux.
316
Vinubhai, T. S., & Thakkar, K. A Review: Solar Water Heating Systems.
317
Hashemi, F., & Mohammadi, M. (2014).Combination continuous action reinforcement learning automata & pso for design of pid controller for avr system. International Journal of Engineering-Transactions A: Basics, 28(1), 52.
318
Deepa, K., Jeyanthi, R., Mohan, S., & Kumar, M. V. (2014, January). Fuzzy based flyback converter. In Advances in Electrical Engineering (ICAEE), 2014 International Conference on (pp. 1-4). IEEE.
319
Chen, S. F. (2014). The Buckling Analysis of Functionally Graded Material Plates in temperature environment.
320
Thumthawatworn, T., Pervez, A., & Santiprabhob, P. (2014). Enhanced Adaptive Traffic Dependent Handover Decision System for Wireless Mobile Networks. International Journal on Advances in Networks and Services Volume 7, Number 1 & 2, 2014.
321
Jamila, E., & Abdelmjid, S. (2014).Physical modeling of a hybrid wind turbine-solar panel system using simscape language (research note). international journal of engineering-transactions b: applications, 27(11), 1767.
322
Jamila, E., & Abdelmjid, S. (2014).Physical modeling of a hybrid wind turbine-solar panel system using simscape language (research note). international journal of engineering-transactions b: applications, 27(11), 1767.
323
Gohari, M., & Tahmasebi, M. (2014). Off-road Vehicle Seat Suspension Optimisation, Part II: Comparative Study between Meta-Heuristic Optimisation Algorithms. Low Frequency Noise, Vibration and Active Control, 33(4), 443-454.
324
Kishore, N. A., Prashanth, A. S., Saran, V. H., & Harsha, S. P. Transmissibility and DPMI analysis of the seated posture of Human under Low frequency vibration.
325
Abid, N., Ayedi, W., Abid, M., & Ammeri, A. C. (2014, March). SW/HW implementation of image covariance descriptor for person detection systems. In Advanced Technologies for Signal and Image Processing (ATSIP), 2014 1st International Conference on (pp. 115-119). IEEE.
326
Sapawe, N., Syahrullail, S., & Izhan, M. I. (2014). Evaluation on the tribological properties of palm olein in different loads applied using pin-on-disk tribotester. Jurnal Tribologi, 3, 11-29.
327
Vatin, N. I., Havula, J., Martikainen, L., Sinelnikov, A. S., Orlova, A. V., & Salamakhin, S. V. (2014, July). Thin-walled cross-sections and their joints: tests and FEM-modelling. In Advanced Materials Research (Vol. 945, pp. 1211-1215).
328
Vatin, N., Havula, J., Martikainen, L., Sinelnikov, A., Orlova, A., & Salamakhin, S. (2014). Buckling force of the thin-walled cross-sections and shear resistance of their joints: tests and FEM-modelling. In The International Scientific Conference „Innovative Materials, Structures and Technologies" (pp. 187-192).
329
Vatin, N. I., Havula, J., Martikainen, L., Sinelnikov, A. S., & Shurovkina, L. L.Reticular-stretched thermo-profile: buckling of the perforated web. Kuldeep Virdi and Lauri Tenhunen (Editors), 93.
330
Wang, Y., Wharton, J. A., & Shenoi, R. A. (2014). Ultimate strength analysis of aged steel-plated structures exposed to marine corrosion damage: A review. Corrosion Science, 86, 42-60.
331
Adewuyi, A., Göpfert, A., & Wolff, T. (2014). Succinyl amide gemini surfactant from Adenopus breviflorus seed oil: A potential corrosion inhibitor of mild steel in acidic medium. Industrial Crops and Products, 52, 439-449.
332
Shemshadi, A., Sheng, Q. Z., & Zhang, W. E. (2014). A Decremental Search Approach for Large Scale Dynamic Ridesharing. In Web Information Systems Engineering–WISE 2014 (pp. 202-217). Springer International Publishing.
333
Dimitrijevic, D., Dimitrieski, V., & Nedic, N. (2014). Prototype Implementation of a Scalable Real-Time Dynamic Carpooling and Ride-Sharing Application. Informatica, 38(3).
334
Polpinij, J. (2014). Ontology-based knowledge discovery from unstructured and semi-structured text.
335
Rana, V., & Singh, G. (2014, November). Analysis of web mining technology and their impact on semantic web. In Computational Intelligence on Power, Energy and Controls with their impact on Humanity (CIPECH), 2014 Innovative Applications of (pp. 5-11). IEEE.
336
Kontiza, K., & Bikakis, A. (2014, June). Web Search Results Visualization: Evaluation of Two Semantic Search Engines. In Proceedings of the 4th International Conference on Web Intelligence, Mining and Semantics (WIMS14) (p. 39). ACM.
337
Geeta, R. B., Totad, S. G., & Reddy, P. P. (2014, January). Web Site Reorganization Based on Topology and Usage Patterns. In Proceedings of the Second International Conference on Soft Computing for Problem Solving (SocProS 2012), December 28-30, 2012 (pp. 841-848). Springer India.
338
Bailey, C., Pemmaraju, K., Phan, M., Radhakrishnan, A., & Thomas, A. (2014). Development of Nonthermal Plasma-Assisted Hand Sanitization. Plasma Medicine, 4(1-4).
339
Recommendation, c. o. (2014).faculty of engineering and technology (fet) (doctoral dissertation, jadavpur university kolkata).
340
Purnomo, H. (2014). Pengukuran Antropometri Tangan Usia 18 Sampai 22 Tahun Kabupaten Sleman Yogyakarta.
341
Barut, C., Dogan, A., & Buyukuysal, M. C. (2014). Anthropometric aspects of hand morphology in relation to sex and to body mass in a Turkish population sample. HOMO-Journal of Comparative Human Biology, 65(4), 338-348.
342
Hanadan, I. (2014). Comparison of Static Anthropometric Characteristics among Workers of Three Iranian Ethnic Groups. Anthropologist, 18(2), 601-608.
343
???. (2014). Plausible 3D Human Hand Modeling for Virtual Ergonomic Assessments of Handheld Product: Construction, Contact simulation and Variational Modeling.
344
Mellqvist, D. Produktutveckling av klämskydd.
345
Ravanello, A., Desharnais, J. M., Bautista Villalpando, L. E., April, A., & Gherbi, A. (2014, October). Performance measurement for cloud computing applications using ISO 25010 standard characteristics. In Software Measurement and the International Conference on Software Process and Product Measurement (IWSM-MENSURA), 2014 Joint Conference of the Intern
346
Rahman, R. R. R. A., Aman, O., Adnan, H., Ahmad, M. A., & Darus, N. M. (2014, June). Factors Of Relationship Between Occupational Stress, Developing Training Needs And Performance Enhancement Of SMEs’ Employees In Melaka. In Malaysia University Conference Engineering Technology.
347
Shehu, R. S., Salawu, H., & Kura, A. H. (2014). Examining the Effect of Common Fuzzy Control Law in Linear Matrix Inequality Framework with Eigenvalue Optimization Applied To Power Network Load Frequency Control. International Journal of Engineering And Science (IJES), 3(3), 63-69.
348
Nandy, A., Saha, S., Ganguly, S., & Chattopadhyay, S. (2014). A Project on Atmospheric Water Generator with the Concept of Peltier Effect. International Journal of Advanced Computer Research, 4(2), 481.
349
Shaikh, M. A. S., & Chopra, M. K. (2014). An Extensive Review on Thermoelectric Refrigerator. International Journal of Scientific Progress and Research, 6(1), 7-11.
350
Nikam, A. N., & Hole, D. J. A. A Review on use of Peltier Effects. Mechanical Engineering Department, Rajrashree Shahu College of Engineering, Pune, India.
351
Ismail, Y., & Alaskalany, A. (2014). Thermoelectric Devices: Cooling and Power Generation. arXiv preprint arXiv:1403.3836.
352
Djafar, Z., Piarah, W. H., & Himran, S. (2014). Experimental Test of the Thermoelectric Performance on the Dispenser Cooler.
353
Jamila, E., & Abdelmjidb, S. Physical Modeling of a Hybrid Wind Turbine-solar Panel System Using Simscape.
354
Ljungh, H. (2014). Self-monitoring of Health: A development project with the aim to identify and develop a user-friendly medical device.
355
Bhuse, P. K., & Vyavahare, R. T. (2014). Ergonomic Evaluation of Knapsack Sprayer used in Agricultural Application. Hand, 3(8.06), 0-48.
356
LAMPI, J. (2014). Large-Scale Distributed Data Management and Processing Using R, Hadoop and MapReduce. University of Oulu, Department of Computer Science and Engineering. Master's Thesis.
357
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
358
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
359
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
360
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
361
Piltan, F., Bazregar, M., Piran, M., & Akbari, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. IAES International Journal of Artificial Intelligence (IJ-AI), 3(1), 36-48.
362
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
363
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
364
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
365
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
366
Piltan, F., Bazregar, M., Piran, M., & Akbari, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. IAES International Journal of Artificial Intelligence (IJ-AI), 3(1), 36-48.
367
Piltan, F., Bazregar, M., Piran, M., & Akbari, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. IAES International Journal of Artificial Intelligence (IJ-AI), 3(1), 36-48.
368
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
369
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
370
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
371
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
372
Nasser, M. A., Gomaa, F. R., Asy, M. A., & Deabs, A. Computer Aided Design of Multi-Stage Gearboxes. International Journal of Advanced Engineering and Global Technology (IJAEGT), 2, 148-157.
373
SIDEK, S. N. B. Multiplexed fibre bragg grating sensors for temperature measurement inside non-thermal plasma reactor.
374
Vallejos, R., & Jara, N. (2014). Join routing and dimensioning heuristic for dynamic WDM optical mesh networks with wavelength conversion. Optical Fiber Technology, 20(3), 217-223.
375
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
376
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
377
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
378
Piltan, F., Bazregar, M., Piran, M., & Akbari, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. IAES International Journal of Artificial Intelligence (IJ-AI), 3(1), 36-48.
379
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
380
Abdullah, L., & Pauzi, H. M. (2014).An effective model for carbon dioxide emissions prediction: comparison of artificial neural networks learning algorithms. international journal of computational intelligence and applications, 13(03), 1450014.
381
Rotich, N. (2014). Forecasting of wind speeds and directions with artificial neural networks.
382
Putra, A., Wong, H. K., & Jalil, N. A. Measurement of structure-borne noise from road input in a motor vehicle cabin.
383
Adebayo, A. A., Yusuf, K. A., & Oladipo, A. (2014). Fabrication And Performance Evaluation Of A Yam Pounder Cum Boiler. Scientia, 8(3), 112-120.
384
Onzo, A., Biaou, J. T., Loko, L. Y., Tamo, M., & Dansi, A. (2014). Vulnérabilité des cossettes issues de quelques cultivars d’igname à l’attaque de Dinoderus porcellus Lesne (Coleoptera: Bostrichidae) en conditions de laboratoire. International Journal of Biological and Chemical Sciences, 8(6), 2494-2507.
385
OMOWUNMI, F. T. (2014).Physico-chemical and organoleptic qualities of millet-high quality cassava flour couscous (Doctoral dissertation, DEPARTMENT OF FOODSCIENCE AND TECHNOLOGY COLLEGE OF FOOD SCIENCE AND HUMAN ECOLOGY, FEDERAL UNIVERSITY OF AGRICULTURE, ABEOKUTA).
386
Siahbazi, A., Barzegar, A., Vosoogh, M., Mirshekaran, A. M., & Soltani, S. (2014). Design Modified Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 12.
387
Matin, F., Piltan, F., Cheraghi, H., Sobhani, N., & Rahmani, M. (2014). Design Intelligent PID like Fuzzy Sliding Mode Controller for Spherical Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(2), 53.
388
Yaghoot, M., Piltan, F., Esmaeili, M., Tayebi, M. A., & Piltan, M. (2014). Design Intelligent Robust Model-base Sliding Guidance Controller for Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(3), 61.
389
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
390
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
391
Barzegar, A., Piltan, F., Vosoogh, M., Mirshekaran, A. M., & Siahbazi, A. (2014). Design Serial Intelligent Modified Feedback Linearization like Controller with Application to Spherical Motor. International Journal of Information Technology and Computer Science (IJITCS), 6(5), 72.
392
Shahcheraghi, A., Piltan, F., Mokhtar, M., Avatefipour, O., & Khalilian, A. (2014). Design a Novel SISO Off-line Tuning of Modified PID Fuzzy Sliding Mode Controller. International Journal of Information Technology and Computer Science (IJITCS), 6(2), 72.
393
Avatefipour, O., Piltan, F., Nasrabad, M. R. S., Sahamijoo, G., & Khalilian, A. (2014). Design New Robust Self Tuning Fuzzy Backstopping Methodology. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(1), 49.
394
Salehi, A., Piltan, F., Mirshekaran, M., Kazeminasab, M., & Esmaeili, Z. (2014). Comparative Study between Two Important Nonlinear Methodologies for Continuum Robot Manipulator Control. International Journal of Information Technology and Computer Science (IJITCS), 6(4), 66.
395
Esmaieli, Z., Piltan, F., Kazeminasab, M., Salehi, A. R., & Mirshekaran, M. (2014). Design Intelligent Robust Back stepping Controller. International Journal of Modern Education and Computer Science (IJMECS), 6(1), 53.
396
Rahmani, M., Piltan, F., Matin, F., Cheraghi, H., & Sobhani, N. (2014). Design Intelligent System Compensator to Computed Torque Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(8), 87.
397
Khajeh, A., Piltan, F., Rashidian, M. R., & Salehi, A. (2014). Design new intelligent PID like fuzzy backstepping controller. International Journal of Modern Education and Computer Science (IJMECS), 6(2), 15.
398
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
399
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
400
Khalilian, A., Sahamijoo, G., Avatefipour, O., Piltan, F., & Nasrabad, M. R. S. (2014). Design high efficiency-minimum rule base PID like fuzzy computed torque controller. International Journal of Information Technology and Computer Science (IJITCS), 6(7), 77.
401
Yazdanpanah, A., Piltan, F., Roshanzamir, A., & Mirshekari, M. (2014). Design PID Baseline Fuzzy Tuning Proportional-Derivative Coefficient Nonlinear Controller with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(5), 90.
402
Nabaee, A., Piltan, F., Ebrahimi, M., & Bazregar, M. (2014). Design intelligent robust partly linear term SMC for robot manipulator systems. International Journal of Intelligent Systems and Applications (IJISA), 6(6), 58.
403
Piltan, F., Rahbar, S., Pooladi, E., & Davarpanah, H. (2014). Design New PID like Fuzzy CTC Controller: Applied to Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(5), 60.
404
Mokhtar, M., Piltan, F., Mirshekari, M., Khalilian, A., & Avatefipour, O. (2014). Design minimum rule-base fuzzy inference nonlinear controller for second order nonlinear system. International Journal of Intelligent Systems and Applications (IJISA), 6(7), 79.
405
Piltan, M., Piltan, F., Yaghoot, M., Rahbar, S., & Tayebi, M. A. (2014). Design High-Efficiency Intelligent PID like Fuzzy Backstepping Controller for Three Dimension Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(4), 52.
406
Tayebi, M. A., Piltan, F., Piltan, M., Yaghoot, M., & Esmaeili, M. (2014). Design New Intelligent-Base Chattering Free Nonlinear Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(10), 55.
407
Roshanzamir, A., Piltan, F., Yazdanpanah, A., & Mirshekari, M. (2014). Design Intelligent Model base Online Tuning Methodology for Nonlinear System. International Journal of Modern Education and Computer Science (IJMECS), 6(4), 46.
408
Khalilian, A., Piltan, F., Avatefipour, O., Nasrabad, M. R. S., & Sahamijoo, G. (2014). Design New Online Tuning Intelligent Chattering Free Fuzzy Compensator. International Journal of Intelligent Systems and Applications (IJISA), 6(9), 75.
409
Siahbazi, A., Barzegar, A., Vosoogh, M., Mirshekaran, A. M., & Soltani, S. (2014). Design Modified Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 12.
410
Matin, F., Piltan, F., Cheraghi, H., Sobhani, N., & Rahmani, M. (2014). Design Intelligent PID like Fuzzy Sliding Mode Controller for Spherical Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(2), 53.
411
Yaghoot, M., Piltan, F., Esmaeili, M., Tayebi, M. A., & Piltan, M. (2014). Design Intelligent Robust Model-base Sliding Guidance Controller for Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(3), 61.
412
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
413
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
414
Barzegar, A., Piltan, F., Vosoogh, M., Mirshekaran, A. M., & Siahbazi, A. (2014). Design Serial Intelligent Modified Feedback Linearization like Controller with Application to Spherical Motor. International Journal of Information Technology and Computer Science (IJITCS), 6(5), 72.
415
Shahcheraghi, A., Piltan, F., Mokhtar, M., Avatefipour, O., & Khalilian, A. (2014). Design a Novel SISO Off-line Tuning of Modified PID Fuzzy Sliding Mode Controller. International Journal of Information Technology and Computer Science (IJITCS), 6(2), 72.
416
Avatefipour, O., Piltan, F., Nasrabad, M. R. S., Sahamijoo, G., & Khalilian, A. (2014). Design New Robust Self Tuning Fuzzy Backstopping Methodology. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(1), 49.
417
Salehi, A., Piltan, F., Mirshekaran, M., Kazeminasab, M., & Esmaeili, Z. (2014). Comparative Study between Two Important Nonlinear Methodologies for Continuum Robot Manipulator Control. International Journal of Information Technology and Computer Science (IJITCS), 6(4), 66.
418
Esmaieli, Z., Piltan, F., Kazeminasab, M., Salehi, A. R., & Mirshekaran, M. (2014). Design Intelligent Robust Back stepping Controller. International Journal of Modern Education and Computer Science (IJMECS), 6(1), 53.
419
Rahmani, M., Piltan, F., Matin, F., Cheraghi, H., & Sobhani, N. (2014). Design Intelligent System Compensator to Computed Torque Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(8), 87.
420
Khajeh, A., Piltan, F., Rashidian, M. R., & Salehi, A. (2014). Design new intelligent PID like fuzzy backstepping controller. International Journal of Modern Education and Computer Science (IJMECS), 6(2), 15.
421
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
422
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
423
Khalilian, A., Sahamijoo, G., Avatefipour, O., Piltan, F., & Nasrabad, M. R. S. (2014). Design high efficiency-minimum rule base PID like fuzzy computed torque controller. International Journal of Information Technology and Computer Science (IJITCS), 6(7), 77.
424
Yazdanpanah, A., Piltan, F., Roshanzamir, A., & Mirshekari, M. (2014). Design PID Baseline Fuzzy Tuning Proportional-Derivative Coefficient Nonlinear Controller with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(5), 90.
425
Nabaee, A., Piltan, F., Ebrahimi, M., & Bazregar, M. (2014). Design intelligent robust partly linear term SMC for robot manipulator systems. International Journal of Intelligent Systems and Applications (IJISA), 6(6), 58.
426
Piltan, F., Rahbar, S., Pooladi, E., & Davarpanah, H. (2014). Design New PID like Fuzzy CTC Controller: Applied to Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(5), 60.
427
Mokhtar, M., Piltan, F., Mirshekari, M., Khalilian, A., & Avatefipour, O. (2014). Design minimum rule-base fuzzy inference nonlinear controller for second order nonlinear system. International Journal of Intelligent Systems and Applications (IJISA), 6(7), 79.
428
Piltan, M., Piltan, F., Yaghoot, M., Rahbar, S., & Tayebi, M. A. (2014). Design High-Efficiency Intelligent PID like Fuzzy Backstepping Controller for Three Dimension Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(4), 52.
429
Tayebi, M. A., Piltan, F., Piltan, M., Yaghoot, M., & Esmaeili, M. (2014). Design New Intelligent-Base Chattering Free Nonlinear Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(10), 55.
430
Roshanzamir, A., Piltan, F., Yazdanpanah, A., & Mirshekari, M. (2014). Design Intelligent Model base Online Tuning Methodology for Nonlinear System. International Journal of Modern Education and Computer Science (IJMECS), 6(4), 46.
431
Piltan, F., Bazregar, M., Piran, M., & Akbari, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. IAES International Journal of Artificial Intelligence (IJ-AI), 3(1), 36-48.
432
Khalilian, A., Piltan, F., Avatefipour, O., Nasrabad, M. R. S., & Sahamijoo, G. (2014). Design New Online Tuning Intelligent Chattering Free Fuzzy Compensator. International Journal of Intelligent Systems and Applications (IJISA), 6(9), 75.
433
MARINI, C. P. A. B. A., & RIVA, P.Existing structures connected with dampers: state of the art and future developments.
434
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
435
Mozafari, N. G., Piltan, F., Shamsodini, M., Yazdanpanah, A., & Roshanzamir, A. (2014). On Line Tuning Premise and Consequence FIS Based on Lyaponuv Theory with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 96.
436
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
437
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
438
Litim, M., Allouche, B., Omari, A., Dequidt, A., & Vermeiren, L. (2014, September). Sliding mode control of Biglide planar parallel manipulator. In Informatics in Control, Automation and Robotics (ICINCO), 2014 11th International Conference on (Vol. 2, pp. 303-310). IEEE.
439
Siahbazi, A., Barzegar, A., Vosoogh, M., Mirshekaran, A. M., & Soltani, S. (2014). Design Modified Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(3), 12.
440
Matin, F., Piltan, F., Cheraghi, H., Sobhani, N., & Rahmani, M. (2014). Design Intelligent PID like Fuzzy Sliding Mode Controller for Spherical Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(2), 53.
441
Yaghoot, M., Piltan, F., Esmaeili, M., Tayebi, M. A., & Piltan, M. (2014). Design Intelligent Robust Model-base Sliding Guidance Controller for Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(3), 61.
442
Bazregar, M., Piltan, F., Nabaee, A., & Ebrahimi, M. (2014). Design Modified Fuzzy PD Gravity Controller with Application to Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 6(3), 82.
443
Barzegar, A., Piltan, F., Vosoogh, M., Mirshekaran, A. M., & Siahbazi, A. (2014). Design Serial Intelligent Modified Feedback Linearization like Controller with Application to Spherical Motor. International Journal of Information Technology and Computer Science (IJITCS), 6(5), 72.
444
Shahcheraghi, A., Piltan, F., Mokhtar, M., Avatefipour, O., & Khalilian, A. (2014). Design a Novel SISO Off-line Tuning of Modified PID Fuzzy Sliding Mode Controller. International Journal of Information Technology and Computer Science (IJITCS), 6(2), 72.
445
Salehi, A., Piltan, F., Mirshekaran, M., Kazeminasab, M., & Esmaeili, Z. (2014). Comparative Study between Two Important Nonlinear Methodologies for Continuum Robot Manipulator Control. International Journal of Information Technology and Computer Science (IJITCS), 6(4), 66.
446
Esmaieli, Z., Piltan, F., Kazeminasab, M., Salehi, A. R., & Mirshekaran, M. (2014). Design Intelligent Robust Back stepping Controller. International Journal of Modern Education and Computer Science (IJMECS), 6(1), 53.
447
Rahmani, M., Piltan, F., Matin, F., Cheraghi, H., & Sobhani, N. (2014). Design Intelligent System Compensator to Computed Torque Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(8), 87.
448
Khajeh, A., Piltan, F., Rashidian, M. R., & Salehi, A. (2014). Design new intelligent PID like fuzzy backstepping controller. International Journal of Modern Education and Computer Science (IJMECS), 6(2), 15.
449
Nazari, I., Hosainpour, A., Piltan, F., Emamzadeh, S., & Mirzaie, M. (2014). Design Sliding Mode Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 6(4), 63.
450
Piran, M., Piltan, F., Akbari, M., Garg, R., & Bazregar, M. (2014). Quality Model and Artificial Intelligence Base Fuel Ratio Management with Applications to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 6(2), 76.
451
Khalilian, A., Sahamijoo, G., Avatefipour, O., Piltan, F., & Nasrabad, M. R. S. (2014). Design high efficiency-minimum rule base PID like fuzzy computed torque controller. International Journal of Information Technology and Computer Science (IJITCS), 6(7), 77.
452
Yazdanpanah, A., Piltan, F., Roshanzamir, A., & Mirshekari, M. (2014). Design PID Baseline Fuzzy Tuning Proportional-Derivative Coefficient Nonlinear Controller with Application to Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(5), 90.
453
Nabaee, A., Piltan, F., Ebrahimi, M., & Bazregar, M. (2014). Design intelligent robust partly linear term SMC for robot manipulator systems. International Journal of Intelligent Systems and Applications (IJISA), 6(6), 58.
454
Piltan, F., Rahbar, S., Pooladi, E., & Davarpanah, H. (2014). Design New PID like Fuzzy CTC Controller: Applied to Spherical Motor. International Journal of Modern Education and Computer Science (IJMECS), 6(5), 60.
455
Mokhtar, M., Piltan, F., Mirshekari, M., Khalilian, A., & Avatefipour, O. (2014). Design minimum rule-base fuzzy inference nonlinear controller for second order nonlinear system. International Journal of Intelligent Systems and Applications (IJISA), 6(7), 79.
456
Piltan, M., Piltan, F., Yaghoot, M., Rahbar, S., & Tayebi, M. A. (2014). Design High-Efficiency Intelligent PID like Fuzzy Backstepping Controller for Three Dimension Motor. International Journal of Information Engineering and Electronic Business (IJIEEB), 6(4), 52.
457
Tayebi, M. A., Piltan, F., Piltan, M., Yaghoot, M., & Esmaeili, M. (2014). Design New Intelligent-Base Chattering Free Nonlinear Control of Spherical Motor. International Journal of Intelligent Systems and Applications (IJISA), 6(10), 55.
458
Roshanzamir, A., Piltan, F., Yazdanpanah, A., & Mirshekari, M. (2014). Design Intelligent Model base Online Tuning Methodology for Nonlinear System. International Journal of Modern Education and Computer Science (IJMECS), 6(4), 46.
459
Khalilian, A., Piltan, F., Avatefipour, O., Nasrabad, M. R. S., & Sahamijoo, G. (2014). Design New Online Tuning Intelligent Chattering Free Fuzzy Compensator. International Journal of Intelligent Systems and Applications (IJISA), 6(9), 75.
460
Arora, S., & Kumar, H. (2014). Modeling of Reactive Distillation Column for the production of Ethyl Acetate.
461
Behnia, H., Faraji, V., Aghasi, M., & Arab Khaburi, D. (2014). High-performance doubly fed induction machine drive system using predictive direct torque control drive system fed by indirect matrix converters. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 27(1), 34-49.
462
Ates, A., Keskin, I., Totiç, E., & Yesil, B. (2014). Investigation of Soil Liquefaction Potential around Efteni Lake in Duzce Turkey: Using Empirical Relationships between Shear Wave Velocity and SPT Blow Count (N). Advances in Materials Science and Engineering, 2014.
463
Shahnazari, H., Shahin, M. A., & Tutunchian, M. A. (2014). Evolutionary-based approaches for settlement prediction of shallow foundations on cohesionless soils. Geotech Eng, 12(1), 55-64.
464
Lad, A. C., & Rao, A. S. Design and Drawing Automation Using Solid Works Application Programming Interface.
465
Nehra, V. (2014). MATLAB/Simulink Based Study of Different Approaches Using Mathematical Model of Differential Equations. International Journal of Intelligent Systems and Applications (IJISA), 6(5), 1.
466
Yousefi, K., Saleh, R., & Zahedi, P. (2014). Numerical study of blowing and suction slot geometry optimization on NACA 0012 airfoil. Journal of Mechanical Science and Technology, 28(4), 1297-1310.
467
Yousefi, K., & Saleh, R. (2014). The effects of trailing edge blowing on aerodynamic characteristics of the NACA 0012 airfoil and optimization of the blowing slot geometry. Journal of Theoretical and Applied Mechanics, 52(1), 165-179.
468
Motlagh, M. S., & Ayazi, S. A. A Hybrid Approach for Evaluation and Prioritization of FailureModes Using Modified FMEA & FAHP.
469
Ravinder, B., & Srinivas, K. Development of Regression Model for Project Risk Prioritization of Building Construction Projects.
470
Abukhalil, T. Y., Patil, M., & Sobh, T. M. (2014). UBSwarm: Design of a Software Environment to Deploy Multiple Decentralized Robots.
471
Sarhan, H. (2014). PLC-controlled stepper motor drive for NC positioning system. International Journal of Engineering & Technology, 3(3), 298-307.
472
Bennoud, S. Modeling and Simulation of Defects Due to corrosion in Turbine Blades of Turbojet.
473
Bennoud, S., Hocine, S., & Slme, H. Calculus of Turbojet Performances for Ideal Case.
474
de Boulay Forde, M. H. (2014). Renewable Energy Technology and the Hotel Sector of Small Island Developing States (SIDS): Managing Sustainability Transitions on the Island of Barbados (Doctoral dissertation, University of Toronto).
475
Ievzerov, I. D. (2014). The stability problems for bars and plates. Inzenerno-Stroitel'nyj Zurnal, (1), 6.
476
Huang, Z. G., Wessam, M. E., & Chen, Z. H. (2014). Numerical investigation of the three-dimensional dynamic process of sabot discard. Journal of Mechanical Science and Technology, 28(7), 2637-2649.
477
Yang, S. Y., Liao, W. T., & Chen, Q. H. (2014). Turbulent Study of Roll Pitch Yaw Phenomena for a Finned Store Released from a Wing Regarding Different Values of Angle of Attack. Procedia Engineering, 79, 86-93.
478
Numerical simulation of a plurality of fins missile non-viscous flow field Chen Ching-ho. (2014). Wing freed. Thesis Institute of Technology aerospace and electronic Huwei University of Science and Technology, 1-126.
479
Fanbao Wei, Pan Jianfeng, Chen Rui, Liu Yang first, Tangai Kun, & Wang Qian. (2014). Ignition advance angle on natural gas rotary engine combustion process. Ordnance Technology, 35 (1), 1-8.
480
Korsane, D. T., Yadav, V., & Raut, K. H. (2014). Pid tuning rules for first order plus time delay system. Int. Journal of Innovative Research in Electrical, Instrumentation and Control Engineering, 2(1), 582-586.
481
Rodríguez-Zalapa, O., Hernández-Zavala, A., & Huerta-Ruelas, J. A. (2014). Fuzzy controller for a pneumatic positioning nonlinear system. In Nature-Inspired Computation and Machine Learning (pp. 370-381). Springer International Publishing.
482
Abbasi, E., Mahjoob, M., & Shafiekhani, A. (2014, October). Attitude control using an extended calssifier system algorithm for offline auto-tuning of a PID controller. In Robotics and Mechatronics (ICRoM), 2014 Second RSI/ISM International Conference on (pp. 930-935). IEEE.
483
Gochhayat, R. A. S. H. M. I. T. A. (2014). PSO based PI controller for load frequency control of interconnected power systems (Doctoral dissertation).
484
Kulbis, M. (2014). PID Controller and It’s Parameters Tuning for Aircraft Stable Flight Controll. Aviation technologies, 2(2), 3-6.
485
Zong Xuejun, Sun Ang, Yangzhong Jun Ho Kan, & Chen Rui. (2014). Based on GA ESR furnaces Fuzzy PID Control. Manufacturing Automation, 36 (10), 127-130.
486
Yin Shuai, Li Caiqin, & seed Yao Yao. (2014). ITAE used in brushless DC motor PID parameter optimization. Micro-motor, 42 (9), 76-79.
487
Akande, S., Oluleye, A. E., & Oyetunji, E. O. (2014, January). Reducibility of Some Multi Criteria Scheduling Problems to Bicriteria Scheduling Problems. In Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia.
488
Jiang, B., Zheng, J., Qiu, S., Wu, M., Zhang, Q., Yan, Z., & Xue, Q. (2014). Review on electrical discharge plasma technology for wastewater remediation. Chemical Engineering Journal, 236, 348-368.
489
Cheng, X., Sherman, J., Murphy, W., Ratovitski, E., Canady, J., & Keidar, M. (2014). The effect of tuning cold plasma composition on glioblastoma cell viability. PloS one, 9(5), e98652.
490
Barakat, C., Gravejat, P., Guaitella, O., Thevenet, F., & Rousseau, A. (2014). Oxidation of isopropanol and acetone adsorbed on TiO 2 under plasma generated ozone flow: Gas phase and adsorbed species monitoring. Applied Catalysis B: Environmental, 147, 302-313.
491
Kusano, Y. (2014). Atmospheric pressure plasma processing for polymer adhesion: a review. The Journal of Adhesion, 90(9), 755-777.
492
Tatarova, E., Bundaleska, N., Sarrette, J. P., & Ferreira, C. M. (2014). Plasmas for environmental issues: from hydrogen production to 2D materials assembly. Plasma Sources Science and Technology, 23(6), 063002.
493
Xiao, G., Xu, W., Wu, R., Ni, M., Du, C., Gao, X., ... & Cen, K. (2014). Non-Thermal plasmas for VOCs abatement. Plasma Chemistry and Plasma Processing, 34(5), 1033-1065.
494
Babij, M., Kowalski, Z. W., Nitsch, K., Silberring, J., & Gotszalk, T. (2014). Atmospheric pressure plasma jet with high-voltage power supply based on piezoelectric transformer. Review of Scientific Instruments, 85(5), 054703.
495
Vander Wal, R. L., Gaddam, C. K., & Kulis, M. J. (2014). Spectroscopic characterization and comparison between biologics, organics and mineral compounds using pulsed micro-hollow glow discharge. Journal of Analytical Atomic Spectrometry, 29(10), 1791-1798.
496
Kwiatkowski, M., Terebun, P., Krupski, P., Samon, R., Diatczyk, J., Pawlat, J., & Stryczewska, H. (2014). Wlasciwosci i zastosowania reaktorów plazmowych typu dysza plazmowa. Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Srodowiska.
497
Bikorimana, J. M. V., & Van den Bossche, A. (2014). Using numerical inverse laplace for optimizing the current control in grid coupled inverters. In International Conference on Electro-Energy (ICEE'2014) (pp. 13-17). Skikda University.
498
Mouele, E. S. M. (2014). Water treatment using electrohydraulic discharge system.
499
Aleknaviciute, I. (2014). Plasma assisted decomposition of methane and propane and cracking of liquid hexadecane (Doctoral dissertation, Brunel University School of Engineering and Design PhD Theses).
500
Samanta, K. K., Basak, S., & Chattopadhyay, S. K. (2014). Environment-Friendly Textile Processing Using Plasma and UV Treatment. In Roadmap to Sustainable Textiles and Clothing (pp. 161-201). Springer Singapore.
501
Yu, H., Zhang, Y., Wong, A., De Rosa, I. M., Chueh, H. S., Grigoriev, M., ... & Hicks, R. F. (2014). Atmospheric and Vacuum Plasma Treatments of Polymer Surfaces for Enhanced Adhesion in Microelectronics Packaging. Adhesion in Microelectronics, 137-172.
502
Shahmirani, Z., Irani, S., Atyabi, S. M., Mirpour, S., Shadpoor, S., Ghorannevis, M., & Joupari, M. D. (2014). Effect of Cold Atmospheric Pressure Plasma and Gold Nanoparticles on Cell Viability. Annual Research & Review in Biology, 4(20), 3108.
503
OTHMAN, F. B. SIMULATION STUDY ON THE DESIGN OF DIESEL ENGINE EXHAUST FOR NOX REMOVABLE.
504
Al-Hakary, S. K., Muhamad, S., & Dosky, L. M. Effect of the Hollow Cathode Geometry on Nitrogen Glow Discharge Plasma.
505
Allam, T. M., Ward, S. A., El-sayed, H. A., Saied, E. M., Soliman, H. M., & Ahmed, K. M. (2014). Electrical Parameters Investigation and Zero Flow Rate Effect of Nitrogen Atmospheric Nonthermal Plasma Jet. Energy and Power Engineering, 6(12), 437.
506
Radic, N. (2014). of Dissertation: Atmospheric Pressure Plasma Activation and. Nanostructured materials, 19(59), 66.
507
Attri, P., Arora, B., Bhatia, R., Venkatesu, P., & Choi, E. H. (2014). Plasma Technology: A New Remediation for Water Purification with or without Nanoparticles. Application of Nanotechnology in Water Research, 63-77.
508
Babij, M., Gotszalk, T., Kowalski, Z. W., Nitsch, K., Silberring, J., & Smoluch, M. (2014). Atmospheric Pressure Plasma Jet for Mass Spectrometry. Acta Physica Polonica A, 125(6), 1260-1263.
509
Chang Cc (2014). Technology has made the use of plasma discharge and purification of hydrogen to drive a fuel cell. Thesis, Institute of Space and Plasma Sciences Kung University, 1-73.
510
Kalaitzis, A. (2014). Decontamination of soil electrical dielectric barrier discharges (Doctoral dissertation).
511
Grzadziel, J., & Plonka, M. (2014). Evaluation of bactericidal activity of low temperature non-equilibrium plasma generated in the reactor RF. EJMT, 2, 3.
512
Booth, D. (2014). Application of cold plasma vitamin and polyphenol oxidase (PFO) Effect of Enzyme Activity.
513
Babij, M., & Kowalski, Z. W. (2014). Two types of atmospheric pressure plasma jet: construction and features. Elektronika: konstrukcje, technologie, zastosowania, 55(10), 30-33.
514
Šuranský, M. (2014). Depositions of polysiloxane films in low temperature plasma.
515
Isa, M. T., Usman, S., Ameh, A. O., Ajayi, O. A., Omorogbe, O., & Ameuru, S. U. (2014). The Effect of Fiber Treatment on the Mechanical and Water Absorption Properties of Short Okra/Glass Fibers Hybridized Epoxy Composites. International Journal of Materials Engineering, 4(5), 180-184.
516
Rachchh, N. V., Ujeniya, P. S., & Misra, R. K. (2014). Mechanical characterisation of rattan fibre polyester composite. Procedia Materials Science, 6, 1396-1404.
517
Santulli, C., Sarasini, F., Fortunati, E., Puglia, D., & Kenny, J. M. (2014). Okra Fibres as Potential Reinforcement in Biocomposites. In Biomass and Bioenergy (pp. 175-190). Springer International Publishing.
518
Odusanya, A. A., Bolasodun, B., & Madueke, C. I. Property Evaluation of Hybrid Seashell/Snail Shell Filler Reinforced Unsaturated Polyester Composite In Comparison With Seashell and Snail Shell Filler Reinforced Unsaturated Polyester Composite.
519
Avatefipour, O., Piltan, F., Nasrabad, M. R. S., Sahamijoo, G., & Khalilian, A. (2014). Design New Robust Self Tuning Fuzzy Backstopping Methodology. International Journal of Information Engineering and Electronic Business, 6(1), 49.
520
Gogoi, T. K., Sarmah, P., & Nath, D. D. (2014). Energy and exergy based performance analyses of a solid oxide fuel cell integrated combined cycle power plant. Energy Conversion and Management, 86, 507-519.
521
Minutillo, M., Perna, A., & Jannelli, E. (2014). SOFC and MCFC system level modeling for hybrid plants performance prediction. International Journal of Hydrogen Energy, 39(36), 21688-21699.
522
Zabihian, F., & Fung, A. S. (2014). Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle (part I): Effects of fuel composition on output power. Journal of the Energy Institute, 87(1), 18-27.
523
Zabihian, F., & Fung, A. S. (2014). Thermodynamic sensitivity analysis of hybrid system based on solid oxide fuel cell. Sustainable Energy Technologies and Assessments, 6, 51-59.
524
Zabihian, F., & Fung, A. S. (2014). Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle (part II): Effects of fuel composition on specific work and efficiency. Journal of the Energy Institute, 87(1), 28-34.
525
Jia, Z. (2014). Integrated SOFC/GT Systems with Improved Dynamic Capabilities for Mobile Applications (Doctoral dissertation, The University of Michigan).
526
He, J., Zhou, P., & Clelland, D. (2014). The development of control strategy for solid oxide fuel cell and micro gas turbine hybrid power system in ship application. Journal of Marine Science and Technology, 19(4), 462-469.
527
Hassanzadeh, c., & F, however. (2014). The modeling and optimization of a single solid oxide fuel cell plate. Professor of Mechanical Engineering, 15 (2), 81-91.
528
Efthymiou, J. Ch., & Efthymiou, I. C. (2014). Hybrid Systems with Solid Oxide Fuel Cells: Select structure suitable for application on ships and study of the corresponding system behavior.
529
Nema, P. K. (2014). Computational study of sloshing behavior in 3-D rectangular tank with and without baffle under Seismic Excitation (Doctoral dissertation, national institute of technology, rourkela).
530
Ambade, R., & Kale, R. CFD Analysis of Sloshing Within Tank.
531
Cunha, A., Caetano, E., & Ribeiro, P. Minimising the sloshing impact in membrane LNG tank using a baffle.
532
Kumar, S. A., Banu, J. R., & Yeom, I. T. (2014). Synergistic degradation of hospital wastewater by solar/TiO2/Fe2+/H2O2 process. Water Quality Research Journal of Canada, 49(3), 223-233.
533
Ganzenko, O., Huguenot, D., Van Hullebusch, E. D., Esposito, G., & Oturan, M. A. (2014). Electrochemical advanced oxidation and biological processes for wastewater treatment: a review of the combined approaches. Environmental Science and Pollution Research, 21(14), 8493-8524.
534
Hamad, D., Mehrvar, M., & Dhib, R. (2014). Experimental study of polyvinyl alcohol degradation in aqueous solution by UV/H 2 O 2 process. Polymer Degradation and Stability, 103, 75-82.
535
Venu, D., Gandhimathi, R., Nidheesh, P. V., & Ramesh, S. T. (2014). Treatment of stabilized landfill leachate using peroxicoagulation process. Separation and Purification Technology, 129, 64-70.
536
Verma, A., Prakash, N. T., & Toor, A. P. (2014). An efficient TiO 2 coated immobilized system for the degradation studies of herbicide isoproturon: Durability studies. Chemosphere, 109, 7-13.
537
Wang, S., Ma, W., Fang, Y., Jia, M., & Huang, Y. (2014). Bismuth oxybromide promoted detoxification of cylindrospermopsin under UV and visible light illumination. Applied Catalysis B: Environmental, 150, 380-388.
538
Verma, A., Prakash, N. T., & Toor, A. P. (2014). Photocatalytic degradation of herbicide isoproturon in TiO2 aqueous suspensions: Study of reaction intermediates and degradation pathways. Environmental Progress & Sustainable Energy, 33(2), 402-409.
539
Ghafoori, S., Shah, K. K., Mehrvar, M., & Chan, P. K. (2014). Pharmaceutical wastewater treatment using granular activated carbon and UV/H2O2 processes: Experimental analysis and modelling. The Canadian Journal of Chemical Engineering, 92(7), 1163-1173.
540
Ghafoori, S., Mehrvar, M., & Chan, P. K. (2014). A statistical experimental design approach for photochemical degradation of aqueous polyacrylic acid using photo-Fenton-like process. Polymer Degradation and Stability, 110, 492-497.
541
Tisa, F., Abdul Raman, A. A., & Daud, W. M. A. W. (2014). Simulation for Supporting Scale-Up of a Fluidized Bed Reactor for Advanced Water Oxidation. The Scientific World Journal, 2014.
542
Velhal, S. G., Kulakrni, S. D., & Jaybhaye, R. G. (2014). Research in Chemistry and Environment.
543
Balladares Moyano, O. D. (2014). Tratamiento de efluentes de una industria textil del cantón Pelileo, Provincia de Tungurahua, contaminados con colorantes azoicos, mediante un proceso electro-fenton (Doctoral dissertation, Quito: EPN, 2014.).
544
Hassan Becky, Roza, North Aziz, mstfayy, Rabbani, davrkhvah, & Baker. (2014). Sanjeev likely frmaldyyd deleted from the water through mhlvlhay iso aksydasyvn pyshrfth (UV / H2O2). Hengameh Cím cognitive sciences book Kashan University ::: Shoaib, 17 (6), 568-574.
545
Terami Fumihiro. (2014). For inactivation conditions of pepper mottle virus by promoting oxidation technology. Kansai pest research bulletin, 56 (0), 71-73.
546
Das, S. Soul Theory. Aubrey Durkin.
547
Das, S. (2014). Message.
548
Salie, F. (2014). An investigation into turbine ventilators as a potential environmental control measure to minimise the risk of transmission of tuberculosis-a laboratory and field study (Doctoral dissertation, University of Cape Town).
549
Ayde, A. (2014). Developing an Expert System for Computer and Network Troubleshooting (Doctoral dissertation, AAU).
550
KWEDHO, E. I. (2014). Effects of international organizations for standardization 9001: 2000 on service delivery in public sectors–a case study of kenya revenue authority (doctoral dissertation, moi university).
551
Xiong, L., Molfino, R., & Zoppi, M. (2013). Fixture layout optimization for flexible aerospace parts based on self-reconfigurable swarm intelligent fixture system. The International Journal of Advanced Manufacturing Technology, 66(9-12), 1305-1313.
552
Das, S. Reincarnation–a Law of Nature.
553
Anandhanarayanan, K., Arora, K., Shah, V., Krishnamurthy, R., & Chakraborty, D. (2013). Separation Dynamics of Air-to-Air Missile Using a Grid-Free Euler Solver. Journal of Aircraft, 50(3), 725-731.
554
Brunese, P. A., & Tanchoco, J. M. A. (2013). On implied within-building constraints for machine layout. International Journal of Production Research, 51(6), 1937-1952.
555
Ripon, K. S. N., Glette, K., Khan, K. N., Hovin, M., & Torresen, J. (2013). Adaptive variable neighborhood search for solving multi-objective facility layout problems with unequal area facilities. Swarm and Evolutionary Computation, 8, 1-12.
556
Saravanan, M., & Arulkumar, P. V. (2013). Design and optimisation for fixed area cellular layout problems using GA and SAA. International Journal of Innovation and Sustainable Development, 7(1), 91-109.
557
Ma, S., Liu, Z. C., & Shi, Y. J. (2013). A Dual-system Method with Differential Evolution and Genetic Algorithm for Loop-based Station Sequencing Problem. Information Technology Journal, 12(4), 728.
558
Kumar, J., Rai, J. N., & Vipin, K. S. (2013, February). Power System State Estimation by use of WLS with Phasor Measurement Unit. In International Journal of Engineering Research and Technology (Vol. 2, No. 2 (February-2013)). ESRSA Publications.
559
Ou, G., Chen, X., Kilic, A., Bartelt-Hunt, S., Li, Y., & Samal, A. (2013). Development of a cross-section based streamflow routing package for MODFLOW. Environmental Modelling & Software, 50, 132-143.
560
Gomes, A., & Morgado, J. (2013). A generalized regula falsi method for finding zeros and extrema of real functions. Mathematical Problems in Engineering, 2013.
561
Stage, S. A. (2013). Comments on an improvement to the Brent’s method. International Journal of Experimental Algorithms, 4(1), 1-16.
562
Krishnamurthy, L. Root Finder Framework.
563
Cai, S., Su, K., Luo, C., & Sattar, A. (2013). NuMVC: An efficient local search algorithm for minimum vertex cover. Journal of Artificial Intelligence Research, 687-716.
564
Gomes, A., & Morgado, J. (2013). A generalized regula falsi method for finding zeros and extrema of real functions. Mathematical Problems in Engineering, 2013.
565
Adeyemi, H. O., Adejuyigbe, S. B., Ismaila, S. O., Adekoya, A. F., & Akanbi, O. G. (2013). Modeling manual material lifting risk evaluation: A fuzzy logic approach. International Journal of Applied Science and Engineering Research, 2(1), 44-59.
566
Shavarani, S. M. (2013). Construction of an Expert System for Assessment of Work-Related Musculoskeletal Disorders for VDT Users (Doctoral dissertation, Eastern Mediterranean University (EMU)).
567
Hashim, A. M., & Dawal, S. Z. M. (2013). Evaluation of Students’ Working Postures in School Workshop.
568
Adeyemi, o. h., adejuyigbe, s. b., ismaila, s. o., & adekoya, a. f. (2013). Reducing Low Back Pain in Construction Works; A Fuzzy Logic Approach.
569
Meen, M. L., Dangayach, G. S., & Bhardwaj, A. (2013). Measuring anthropometric data for designing hand tools in handicraft industries. International Journal of Process Management and Benchmarking, 3(3), 334-351.
570
Khan, S. U., Rafeeqi, S. F. A., & Ayub, T. (2013). Strengthening of RC beams in flexure using ferrocement. Iranian Journal of Science and Technology Transaction of Civil Engineering, 37, 353-365.
571
Mathai, J. (2013). Performance of retrofitted reinforced concrete columns subjected to cyclic loading.
572
Khan, S. U., Nuruddin, M. F., Ayub, T., & Shafiq, N. (2013, July). Effects of ferrocement in strengthening the serviceability properties of reinforced concrete structures. In Advanced Materials Research (Vol. 690, pp. 686-690).
573
Patil, M., Khandekar, S. D., & Patil, J. R. Experimental Study of Compressive Strength of Bitumen Ferrocement.
574
Rafeeqi, S. F. A., Khan, S. U., & Lodi, S. H. Performance of ferrocement as flexural strengthening in rural areas.
575
Mala, K., Mullick, A. K., Jain, K. K., & Singh, P. K. (2013). Effect of relative levels of mineral admixtures on strength of concrete with ternary cement blend. International Journal of Concrete Structures and Materials, 7(3), 239-249.
576
Abd El-Aziz, M. A., & Abo-Hashema, M. A. (2013). Measured effects on engineering properties of clayey subgrade using lime–Homra stabiliser. International Journal of Pavement Engineering, 14(4), 321-332.
577
Oraizi, H., Bahramgiri, M., & Hedayati, S. (2013, May). A novel miniaturized multilayer E-shaped patch antenna using Giuseppe Peano fractal geometry on its edges for WLAN dual-band applications. In Electrical Engineering (ICEE), 2013 21st Iranian Conference on (pp. 1-4). IEEE.
578
Toutouh, J., Nesmachnow, S., & Alba, E. (2013). Fast energy-aware OLSR routing in VANETs by means of a parallel evolutionary algorithm. Cluster Computing, 16(3), 435-450.
579
Ansari, N. A., Shende, P. N., Sheikh, M. J., & Vaidya, R. D. (2013). Study and Justification of Body Postures of Workers Working In SSI by Using Reba. International Journal of Engineering and Advanced Technology (IJEAT) Vol, 2(3).
580
Avhad, M., Divekar, V., Golatkar, H., & Joshi, S. (2013, December). Microcontroller based automation system using industry standard SCADA. In India Conference (INDICON), 2013 Annual IEEE (pp. 1-6). IEEE.
581
Lakshmi, P. (2013). Service oriented architectural models for power system transient stability analysis.
582
Manaz, M., & Liyanage, K. M. (2013, December). Delay analysis of small IP packets in GPRS RLC layer. In Industrial and Information Systems (ICIIS), 2013 8th IEEE International Conference on (pp. 489-494). IEEE.
583
Nunoo, S., & Mahama, E. K. (2013). Investigation into Remote Monitoring of Power Transformers using SCADA. International Journal of Energy Engineering, 3(6), 213.
584
Saptadi, A. H. (2013).Sebuah tinjauan terhadap teknologi akuisisi data dan pemantauan jarak jauh. In Prosiding Seminar Nasional Sains Dan Teknologi Fakultas Teknik (Vol. 1, No. 1).
585
Ugwoke, F. N. (2013). SmartGreen: A Novel Green Computing Architecture for Environmental Data Acquisition in IT/Automation DataCenter. African Journal of Computing & ICT, 6(5).
586
Buccafurri, F., Comi, A., Lax, G., & Rosaci, D. (2013). A Trust-Based Approach for Detecting Compromised Nodes in SCADA Systems. In Multiagent System Technologies (pp. 222-235). Springer Berlin Heidelberg.
587
Musa, S., Shahzad, A., & Aborujilah, A. (2013, January). Simulation base implementation for placement of security services in real time environment. In Proceedings of the 7th International Conference on Ubiquitous Information Management and Communication (p. 31). ACM.
588
Ghani, A., Ruddin, M., Hanafiah, M., Ariff, M., Raman, S. H., Jusoh, W., ... & Baharudin, Z. A. (2013). Development of a novel fault management in distribution system using distribution automation system in conjunction with GSM communication. International Journal of Smart Grid and Clean Energy, 2(3), 229-335.
589
Ghani, A., Ruddin, M., Raman, S. H., Jusoh, W., Ezwane, W. N. S., Hanafiah, M., ... & Baharudin, Z. A. (2013). A Low Cost Wireless Data Acquisition System for Distribution Automation System.
590
Sabrin, S., Morshed, K. M., Rahman, M. M., & Karmokar, D. K. A Compact, Wide-Beam, High Gain Antenna for Wearable Medical Body-Area Network Devices.
591
BRENIUC, L., & HABA, C. G. gps and gsm system for the development of car tracking application.
592
Mitran, G., Ilie, S., & Tabacu, I. (2013). The Estimation of CO2 Emission from Road Vehicles by Traffic Macro-Simulation. In Urban Environment (pp. 365-374). Springer Netherlands.
593
Picazo-Rodenas, M. J., Royo, R., Antonino-Daviu, J., & Roger-Folch, J. (2013). Use of the infrared data for heating curve computation in induction motors: Application to fault diagnosis. Engineering Failure Analysis, 35, 178-192.
594
Singh, M., Patkar, A., Pant, M., & Jain, A. (2013, April). Global optimization of a single inlet T-junction cooling system using differential evolution. In Swarm Intelligence (SIS), 2013 IEEE Symposium on (pp. 200-205). IEEE.
595
Boese, C., Dietzel, A., & Büttgenbach, S. (2013). Multifunktionaler Werkzeugwechsler für den Einsatz in mikrotechnischen Prozessketten–Messen, Prüfen, Montieren. Mikrosystemtechnik 2013.
596
Lorenz, T., Al-Halhouli, A. T., Mohsen, M., Matar, M., Büttgenbach, S., & Dietzel, A. (2013). Entwicklung und Simulation passiver Mikromischer für Strömungen im Bereich niedriger Reynolds-Zahlen. Mikrosystemtechnik 2013.
597
Al-Halabi, L., Balck, A., Michalzik, M., Fröde, D., Büttgenbach, S., Hust, M., ... & Dübel, S. (2013, January). Recombinant antibody fragments allow repeated measurements of C-reactive protein with a quartz crystal microbalance immunosensor. In MAbs (Vol. 5, No. 1, pp. 140-149). Taylor & Francis.
598
Shafiullah, G. M., Oo, A. M., Ali, A. S., Wolfs, P., & Arif, M. T. (2013). Renewable Energy Integration: Opportunities and Challenges. In Smart Grids (pp. 45-76). Springer London.
599
Lazari, A. L., & Charalambous, C. A. (2013, May). Integrating Greenhouse Gas Emissions Costs in Lifecycle Loss Evaluations: A Case Study for Transmission Lines. In Conference Papers in Science (Vol. 2013). Hindawi Publishing Corporation.
600
Shafiullah, G. M., Oo, A. M., Ali, A. S., & Wolfs, P. (2013). Potential challenges of integrating large-scale wind energy into the power grid–A review. Renewable and Sustainable Energy Reviews, 20, 306-321.
601
Elahee, K., & Jugoo, S. (2013). Ocean Thermal Energy for Air-conditioning: Case Study of a Green Data Center. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 35(7), 679-684.
602
Porak, D. N., VanZwieten, J. H., & Wiles, B. (2013). An Analysis of Florida’s Sea Water Cooling Resource. Marine Technology Society Journal, 47(4), 226-239.
603
Gallego Marcos, I. (2013). Thermal Mixing CHT Simulations with OpenFOAM: URANS and LES.
604
December, P. A. M. L. pure and applied mathematics letters.
605
Minisci, E., & Vasile, M. (2013). Robust Design of a Reentry Unmanned Space Vehicle by Multifidelity Evolution Control. AIAA journal, 51(6), 1284-1295.
606
de Paula Protásio, T., Bufalino, L., Tonoli, G. H. D., Junior, M. G., Trugilho, P. F., & Mendes, L. M. (2013). Brazilian lignocellulosic wastes for bioenergy production: characterization and comparison with fossil fuels. BioResources, 8(1), 1166-1185.
607
Danso-Boateng, E., Holdich, R. G., Shama, G., Wheatley, A. D., Sohail, M., & Martin, S. J. (2013). Kinetics of faecal biomass hydrothermal carbonisation for hydrochar production. Applied Energy, 111, 351-357.
608
Nasiri, H., Boloorani, A. D., Sabokbar, H. A. F., Jafari, H. R., Hamzeh, M., & Rafii, Y. (2013). Determining the most suitable areas for artificial groundwater recharge via an integrated PROMETHEE II-AHP method in GIS environment (case study: Garabaygan Basin, Iran). Environmental monitoring and assessment, 185(1), 707-718.
609
Ilangkumaran, M., Avenash, A., Balakrishnan, V., Kumar, S. B., & Raja, M. B. (2013). Material selection using hybrid MCDM approach for automobile bumper. International Journal of Industrial and Systems Engineering, 14(1), 20-39.
610
Wu, X., & Yi, J. (2013). U.S. Patent No. 8,515,835. Washington, DC: U.S. Patent and Trademark Office.
611
Fernandes, R., Gouveia, B., & Pinho, C. (2013). Integrated inventory valuation in multi-echelon production/distribution systems. International Journal of Production Research, 51(9), 2578-2592.
612
HARYADI, S. (2013).Perbandingan perhitungan perencanaan dan pengendalian persediaan bahan baku. bulletin ekonomi, 11(1), 1-12.
613
Rajesh, A., & Nakkeeran, R. (2013). Contention based bandwidth request with signaling analysis in IEEE 802.16 two hop relay networks. Computers & Electrical Engineering, 39(2), 349-360.
614
Anbazhagan, R., & Rangaswamy, N. (2013). Investigation on mutual contention bandwidth request mechanisms in two-hop relay network with ITU-R path loss models. ISRN Communications and Networking, 2013.
615
Kabir, A., Hasan, M., & Miah, M. K. (2013). Strength Prediction Model for Concrete.
616
Hernández-Zaragoza, J. B., López-Lara, T., Horta-Rangel, J., López-Cajún, C., Rojas-González, E., García-Rodríguez, F. J., & Adue, J. (2013). Cellular Concrete Bricks with Recycled Expanded Polystyrene Aggregate. Advances in Materials Science and Engineering, 2013.
617
Dupleix, A., Kusiak, A., Hughes, M., & Rossi, F. (2013). Measuring the thermal properties of green wood by the transient plane source (TPS) technique. Holzforschung, 67(4), 437-445.
618
Fortino, S., Genoese, A., Genoese, A., & Rautkari, L. (2013). FEM simulation of the hygro-thermal behaviour of wood under surface densification at high temperature. Journal of Materials Science, 48(21), 7603-7612.
619
Bassioni, G., & Ali, M. M. (2013). Studying the physico-chemical properties of commercially available oil-well cement additives using calorimetry. Journal of thermal analysis and calorimetry, 111(1), 295-303.
620
Vashist, S. (2013). Rotman Lens Antenna in Microstrip configuration.
621
Vashist, S., Soni, M. K., & Singhal, P. K. Genetic Approach in Patch Antenna Design. International Journal of Emerging Science and Engineering (IJESE) ISSN, 2319-6378.
622
Imtiaz Ahmed, M., Sifat Arefin, M., & Sajjad Hussain, M. Z. S. Performance Study of Microstrip patch Antenna for GPS Communication System.
623
Hassanipour, F., Raya, I. P., & Mortazavi, S. N. (2013). Simulation of vortex ring permeation in porous media. Journal of Porous Media, 16(7).
624
High, H. H. I. T. (2013). Supercritical and Ultra-Supercritical Boilers.
625
Gehring, B. J. (2013). Modeling and analysis of latent heat high temperature thermal energy storage for concentrating solar power plants.
626
Huff, P. cal and h Is To.
627
Kumar, J., Rai, J. N., & Sengar, R. S. (2013). Effect of phasor measurement unit (pmu) on the network estimated variables. International Journal on Electrical and Power Engineering, 4(1), 46.
628
Rahman, M. S., Pota, H. R., & Orchi, T. F. (2013, September). A multi-agent approach for enhancing transient stability of smart grids with renewable energy. In Power Engineering Conference (AUPEC), 2013 Australasian Universities (pp. 1-6). IEEE.
629
Usman, B. (2013). Satellite Imagery Land Cover Classification using K-Means Clustering Algorithm Computer Vision for Environmental Information Extraction.
630
Wang, B., Xu, S. H., Meng, Y. H., & Wang, X. L. (2013). A process neural network based on improved particle swarm optimization and its application in PID control. Advances in Information Sciences and Service Sciences, 5(7), 701.
631
Pan, J. N., & Chen, S. C. (2013). Correlated Risk Assessment and Its Managerial Applications. In Diversity, Technology, and Innovation for Operational Competitiveness: Proceedings of the 2013 International Conference on Technology Innovation and Industrial Management (pp. S1_55-74). ToKnowPress.
632
Chand, K., kumar, R., & sharma, S. (2013). Rarefaction and Darcy effects on the hydromagnetic flow of radiating and reacting fluid in a vertical channel. Turkish Journal of Engineering and Environmental Sciences, 37(2), 137-145.
633
Es-Saheb, M., Al-Witry, A., & Albedah, A. (2013). Analyses of Plane-strain Compression Using the Upper Bound Method.
634
Neetu, S. B., & Bansal, R. K. (2013). Design and analysis of fractal antennas based on Koch and Sierpinski fractal geometries. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2(6), 2110-2116.
635
Liu, G., Xu, L., & Wu, Z. S. (2013). Miniaturized crossed-dipole circularly polarized fractal antenna. Progress In Electromagnetics Research Letters, 39, 49-62.
636
Li, G., Zheng, Y., Hu, G., & Zhang, Z. (2013). Experimental investigation on heat transfer enhancement from an inclined heated cylinder with constant heat input power in infrasonic pulsating flows. Experimental Thermal and Fluid Science, 49, 75-85.
637
Rahman, M. M., Hossain, M. M., & Karmakar, K. K. (2013, February). ?-shape microstrip antenna design for WiMAX, Wi-Fi and biomedical application at 2.45 GHz. In Advance Computing Conference (IACC), 2013 IEEE 3rd International (pp. 546-549). IEEE.
638
Vyas, P., Parihar, N., Gupta, V., & Jain, R. (2013). A Comparison Study for PSD Performance in OFDM Systems Based on Using Autocorrelation Techniques. International Journal of Scientific Research in Computer Science and Engineering, 1(02), 10-14.
639
Vyas, M. P., Bohra, M. S., Parihar, M. N., Gupta, M. V., & Jain, M. R. (2013).A comparison study for ber performance in ofdm systems based on using m-qam with de-tection techniques.
640
Kumar, S., & Sharma, S. (2013, December). Performance evaluation physical layer of IEEE 802.11 standards under fourier transform and wavelet transform over Rician fading channel. In Information Management in the Knowledge Economy (IMKE), 2013 2nd International Conference on (pp. 69-74). IEEE.
641
Javed, M. A., & Khan, J. Y. (2013). An Efficient Data Dissemination Scheme for Warning Messages in Vehicular Ad Hoc Networks. Security, Design, and Architecture for Broadband and Wireless Network Technologies, 308.
642
Avila, J., Vinoth, B., & Thenmozhi, K. (2013, April). DWT & FEC guided orthogonal frequency division multiplexing (MB-OFDM)-enhanced quality data rate. In Information & Communication Technologies (ICT), 2013 IEEE Conference on (pp. 520-524). IEEE.
643
Sharma, B., & Pandey, R. A Performance Enhancement in BER for OFDM System Using 16-QAM Technique and Viterbi Algorithm.
644
Anwar, F., Masud, M. H., & Latif, S. A. (2013, December). Fuzzy Logic based Handoff Latency Reduction Mechanism in Layer 2 of Heterogeneous Mobile IPv6 Networks. In IOP Conference Series: Materials Science and Engineering (Vol. 53, No. 1, p. 012085). IOP Publishing.
645
Manda-Vy, R. N.,Stefana, R. Z., & Tantely, H. Z. (2013, August). Conversational QoS comparison between WiMAX and UMTS. In Innovative Computing Technology (INTECH), 2013 Third International Conference on (pp. 113-116). IEEE.
646
Thumthawatworn, T., Pervez, A., & Santiprabhob, P. (2013). Adaptive Modular Fuzzy-based Handover Decision System for Heterogeneous Wireless Networks. International Journal of Networks and Communications, 3(1), 25-38.
647
Shires, A., & Kourkoulis, V. (2013). Application of circulation controlled blades for vertical axis wind turbines. Energies, 6(8), 3744-3763.
648
Woods, L. D. (2013). Simulation of VAWT and Hydrokinetic Turbines with Variable Pitch Foils (Doctoral dissertation, Boise State University).
649
Pope, K., Wang, Z. L., Secnik, E., & Naterer, G. F. Transient Airfoil Aerodynamics of Vertical Axis Wind Turbines CCTC 2013 Paper Number 1569694747.
650
Part, A. (2013). Applications: An International Journal of Computation and Methodology. Numerical Heat Transfer, Part A, 63, 590-603.
651
Olyai, K., & Ardekani, S. A. (2013). A Feasibility Study for Converting HOV Lanes to Managed Lanes in Dallas, Texas. In Transportation Research Board 92nd Annual Meeting (No. 13-2022).
652
Shires, A., & Kourkoulis, V. (2013). Application of circulation controlled blades for vertical axis wind turbines. Energies, 6(8), 3744-3763.
653
Djojodihardjo, H. (2013). Progress and Development of Coanda Jet and Vortex Cell for Aerodynamic Surface Circulation Control–An Overview. The SIJ Transactions on Advances in Space Research & Earth Exploration (ASREE), 1(1).
654
Devabhaktuni, V., Alam, M., Depuru, S. S. S. R., Green, R. C., Nims, D., & Near, C. (2013). Solar energy: Trends and enabling technologies. Renewable and Sustainable Energy Reviews, 19, 555-564.
655
Sarvi, M., & Abedi, S. (2013).An intelligent algorithm based controller for multiple output dc-dc converters with voltage mode weighting factor. International Journal of Engineering-Transactions C: Aspects, 27(6), 889.
656
Vengadeshwari, R. S., & Reddy, H. J. Optimum Concrete mix Design using Heuristic Techniques.
657
Abdi, B., Mozafari, H., Abdullah, M. R., & Ayob, A. (2013). Multi-objective Design of Fibre Metal Laminates for Maximum Impact Resistance using Imperialist Competitive Algorithm and Genetic Algorithm. Global Journal on Technology, 3.
658
Syahrullail, S., Nuraliza, N., Izhan, M. I., Hamid, M. A., & Razaka, D. M. (2013). Wear Characteristic of Palm Olein as Lubricant in Different Rotating Speed. Procedia Engineering, 68, 158-165.
659
Samion, S., Ibrahim, M. I., Sidik, N. A. C., & Jaafar, M. N. M. (2013). Wear Behavior of Titanium Alloy Lubricated with Palm Olein as Bio-Lubricant Using Pin-On-Disk Tester. Jurnal Teknologi, 66(1).
660
Izhan, M. I., Wira, J. Y., Kadir, M. R. A., & Syahrullail, S. (2013, June). Experimental study on the effect of different speeds applied with palm olein using pin-on-disk tester. In Applied Mechanics and Materials (Vol. 315, pp. 946-950).
661
Razak, D. M., Syahrullail, S., Yahya, A., Mahmud, N., Hashim, N. L. S., & Nugroho, K. (2013). Lubrication on the Curve Surface Structure Using Palm Oil and Mineral Oil. Procedia Engineering, 68, 607-612.
662
Bucmys, Ž., & Šauciuvenas, G. (2013). The behavior of cold formed steel structure connections. Engineering Structures and Technologies, 5(3), 113-122.
663
Singla, P., Kaur, S., & Singh, S. (2013). A Review on Acoustic Echo Cancellation Techniques. International Journal of Advanced Research in Computer Engineering & Technology (IJARCET), 2(11), 2941-2943.
664
Nagler, J. (2013). Pitting corrosion investigation of cantilever beams using FE method.
665
Dimitrijevic, D., Nedic, N., & Dimitrieski, V. (2013, September). Real-time carpooling and ride-sharing: Position paper on design concepts, distribution and cloud computing strategies. In Computer Science and Information Systems (FedCSIS), 2013 Federated Conference on (pp. 781-786). IEEE.
666
Nithish, R., Sabarish, S., Kishen, M. N., Abirami, A. M., & Askarunisa, A. (2013, December). An ontology based sentiment analysis for mobile products using tweets. In Advanced Computing (ICoAC), 2013 Fifth International Conference on (pp. 342-347). IEEE.
667
Thakare, P. D., Ghonge, M., Gupta, S., Bhosle, A. A., Raich, A. R., Vidhate, A., ... & Kadam, S. U. (2013). A REVIEW ON INFORMATION REPRESENTAION AND RETRIVAL IN SEMANTIC WEB.
668
Polpinij, J. (2013). Ontology-based Knowledge Discovery from Unstructured Text. International Journal of Information Processing and Management, 4(4), 21.
669
Bharamagoudar, G. R., Totad, S. G., & PVGD, P. R. Literature Survey on Web Mining. IOSR Journal of Computer Engineering (IOSRJCE) ISSN: 2278-0661, ISBN: 2278-8727 Volume, 5, 31-36.
670
Singh, D., & Vinay, D. (2013). Gender participation in Indian agriculture: An ergonomic evaluation of occupational hazard of farm and allied activities. International Journal of Agriculture, Environment and Biotechnology, 6(1), 157-168.
671
Amro, A. A. (2013). A Novel Method for Estimating Anthropometrics from a Single 2D Image (Doctoral dissertation, University of Jordan).
672
Chandra, A., Chandna, P., & Deswal, S. (2013). Estimation of hand index for male industrial workers of Haryana State (India). International Journal of Engineering, Science and Technology, 5(1), 55-65.
673
Chen, C. T. (2013). Improved efficient authentication scheme with anonymity in global mobility networks. International Journal of Innovative Computing, Information, and Control, 9(8), 3319-3339.
674
Hu Jun Da, Yi Yan Jie, & Hu Hui. (2013). Coal mine power switching power supply TS Fuzzy Control Central South University (Natural Science), 5, 030.
675
Fonseca Mendes, L. A. (2013). Senior managers and SMEs’ propensity to quality improvement.
676
Gromov, I. Yu, & Kozhevnikov. (2013). Modeling fuser Peltier for process optimization systems for ensuring thermal regime of electronic money. New information technologies in automated systems, (16).
677
Kazemi, M., Dabiri, Y., & Li, L. P. (2013). Recent advances in computational mechanics of the human knee joint. Computational and mathematical methods in medicine, 2013.
678
Ingrassia, T., Nalbone, L., Nigrelli, V., Tumino, D., & Ricotta, V. (2013). Finite element analysis of two total knee joint prostheses. International Journal on Interactive Design and Manufacturing (IJIDeM), 7(2), 91-101.
679
Leal–Naranjo, J. A., Torres-San Miguel, C. R., & Faraón, M. (2013). Structural numerical analysis of a three fingers prosthetic hand prototype. International Journal, 8(13), 526-536.
680
Hafis, M. B. S., Farahana, R. N., Ridzuan, M. J. M., & Adlina, M. T. (2013, August). Optimal Coefficient of Friction on Artificial Knee Joint Contact Surfaces. In Advanced Materials Research (Vol. 716, pp. 565-568).
681
McGeough, J. A. Computer-Aided Engineering in Joint Replacements. The Engineering of Human Joint Replacements, 131-165.
682
Qiu Yi Yan, Zhen Xin Kai, Qu Guang-yun, & Lv Weijia. (2013). Finite element analysis of knee revision tibial defect repair applications. Journal of Orthopaedic Trauma, 15 (1), 18-22.
683
Cernaianu, M. O., & Gontean, A. (2013). Parasitic elements modelling in thermoelectric modules. Circuits, Devices & Systems, IET, 7(4), 177-184.
684
Cernaianu, M. O., & Gontean, A. (2013). High-accuracy thermoelectrical module model for energy-harvesting systems. Circuits, Devices & Systems, IET, 7(3), 114-123.
685
Tripathy, S., Prakash, L. B. O. M., Patro, B. S., & Mandal, S. K. (2013). A comparative analysis of different 8-bit adder topologies at 45 nm technology. International journal of engineering research and technology, 2(10).
686
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
687
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
688
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
689
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Intelligent Robust Fuzzy-Parallel Optimization Control of a Continuum Robot Manipulator. International Journal of Control and Automation, 6(3), 15-34.
690
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
691
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
692
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
693
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
694
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
695
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
696
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
697
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
698
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
699
Sadrnia, O. R., Piltan, F., Jafari, M., Eram, M., & Shamsodini, M. (2013). Design PID Estimator Fuzzy plus Backstepping to Control of Uncertain Continuum Robot. International Journal of Hybrid Information Technology, 6(4), 31-48.
700
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
701
Jalali, A., Piltan, F., Hashemzadeh, H., Hasiri, A., & Hashemzadeh, M. (2013). Design Novel Soft Computing Backstepping Controller with Application to Nonlinear Dynamic Uncertain System. International Journal of Intelligent Systems and Applications (IJISA), 5(10), 93.
702
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
703
Zahmatkesh, S., Piltan, F., Heidari, K., Shamsodini, M., & Heidari, S. (2013). Artificial Error Tuning Based on Design a Novel SISO Fuzzy Backstepping Adaptive Variable Structure Control. International Journal of Intelligent Systems and Applications (IJISA), 5(11), 34.
704
Kazeminasab, M., Piltan, F., Esmaeili, Z., Mirshekaran, M., & Salehi, A. (2013). Design Parallel Fuzzy Partly Inverse Dynamic Method plus Gravity Control for Highly Nonlinear Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(1), 112.
705
Heidari, S., Piltan, F., Shamsodini, M., Heidari, K., & Zahmatkesh, S. (2013). Design New Nonlinear Controller with Parallel Fuzzy Inference System Compensator to Control of Continuum Robot Manipulator. International Journal of Control and Automation, 6(4).
706
Piltan, F., Zare, S., ShahryarZadeh, F., & Mansoorzadeh, M. (2013). Supervised Optimization of Fuel Ratio in IC Engine Based on Design Baseline Computed Fuel Methodology. International Journal of Information Technology and Computer Science (IJITCS), 5(4), 76.
707
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
708
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
709
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
710
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
711
Shamsodini, M., Manei, R., Bekter, A., Ranjbar, B., & Soltani, S. (2013). Design a New Fuzzy Optimize Robust Sliding Surface Gain in Nonlinear Controller. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 91.
712
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
713
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
714
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
715
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
716
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
717
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
718
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Intelligent Robust Fuzzy-Parallel Optimization Control of a Continuum Robot Manipulator. International Journal of Control and Automation, 6(3), 15-34.
719
Piltan, F., Rafaati, M. J., Khazaeni, F., Hosainpour, A., & Soltani, S. (2013). A Design High Impact Lyapunov Fuzzy PD-Plus-Gravity Controller with Application to Rigid Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 17.
720
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
721
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
722
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
723
Piltan, F., ShahryarZadeh, F., Mansoorzadeh, M., & Zare, S. (2013). Robust Fuzzy PD Method with Parallel Computed Fuel Ratio Estimation Applied to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 5(8), 83.
724
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
725
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
726
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
727
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
728
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
729
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
730
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
731
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
732
Piltan, F., Zare, S., ShahryarZadeh, F., & Mansoorzadeh, M. (2013). Supervised Optimization of Fuel Ratio in IC Engine Based on Design Baseline Computed Fuel Methodology. International Journal of Information Technology and Computer Science (IJITCS), 5(4), 76.
733
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
734
Mansoorzadeh, M. (2013). Design Novel Model Reference Artificial Intelligence Based Methodology to Optimized Fuel Ratio in IC Engine. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(2), 44.
735
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
736
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
737
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
738
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
739
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
740
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
741
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
742
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
743
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
744
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Intelligent Robust Fuzzy-Parallel Optimization Control of a Continuum Robot Manipulator. International Journal of Control and Automation, 6(3), 15-34.
745
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
746
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
747
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
748
Piltan, F., ShahryarZadeh, F., Mansoorzadeh, M., & Zare, S. (2013). Robust Fuzzy PD Method with Parallel Computed Fuel Ratio Estimation Applied to Automotive Engine. International Journal of Intelligent Systems and Applications (IJISA), 5(8), 83.
749
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
750
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
751
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
752
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
753
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
754
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
755
Sadrnia, O. R., Piltan, F., Jafari, M., Eram, M., & Shamsodini, M. (2013). Design PID Estimator Fuzzy plus Backstepping to Control of Uncertain Continuum Robot. International Journal of Hybrid Information Technology, 6(4), 31-48.
756
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
757
Jalali, A., Piltan, F., Hashemzadeh, H., Hasiri, A., & Hashemzadeh, M. (2013). Design Novel Soft Computing Backstepping Controller with Application to Nonlinear Dynamic Uncertain System. International Journal of Intelligent Systems and Applications (IJISA), 5(10), 93.
758
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
759
Piltan, F., Zare, S., ShahryarZadeh, F., & Mansoorzadeh, M. (2013). Supervised Optimization of Fuel Ratio in IC Engine Based on Design Baseline Computed Fuel Methodology. International Journal of Information Technology and Computer Science (IJITCS), 5(4), 76.
760
Esmaili, P., & Esmaili, P. (2013). Modeling of two cooperative manipulators to handle an object. International Journal of Engineering, 2(1).
761
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
762
Morishita, T., & Tojo, O. (2013). Integer inverse kinematics method using Fuzzy logic. Intelligent Service Robotics, 6(2), 101-108.
763
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
764
Mansoorzadeh, M. (2013). Design Novel Model Reference Artificial Intelligence Based Methodology to Optimized Fuel Ratio in IC Engine. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(2), 44.
765
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
766
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
767
Park, S., & Rahmdel, S. (2013). A new fuzzy sliding mode controller with auto-adjustable saturation boundary layers implemented on vehicle suspension. Int. J. Eng. C Asp, 26(12), 1401-1410.
768
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
769
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
770
Wayzode, n. d., & wankhade, n. a. use of macro for design of marine coupling.
771
WAYZODE, N. D., & WANKHADE, N. A. (2013). Design of flange coupling using CATSCript.
772
Wang, C., & Cheng, L. (2013). Use of fiber Bragg grating sensors for monitoring concrete structures with prestressed near-surface mounted carbon fiber–reinforced polymer strips. Journal of Intelligent Material Systems and Structures, 1045389X13489364.
773
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
774
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
775
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
776
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
777
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
778
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
779
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
780
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
781
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
782
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
783
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
784
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
785
Sadrnia, O. R., Piltan, F., Jafari, M., Eram, M., & Shamsodini, M. (2013). Design PID Estimator Fuzzy plus Backstepping to Control of Uncertain Continuum Robot. International Journal of Hybrid Information Technology, 6(4), 31-48.
786
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
787
Jalali, A., Piltan, F., Hashemzadeh, H., Hasiri, A., & Hashemzadeh, M. (2013). Design Novel Soft Computing Backstepping Controller with Application to Nonlinear Dynamic Uncertain System. International Journal of Intelligent Systems and Applications (IJISA), 5(10), 93.
788
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
789
Zahmatkesh, S., Piltan, F., Heidari, K., Shamsodini, M., & Heidari, S. (2013). Artificial Error Tuning Based on Design a Novel SISO Fuzzy Backstepping Adaptive Variable Structure Control. International Journal of Intelligent Systems and Applications (IJISA), 5(11), 34.
790
Kazeminasab, M., Piltan, F., Esmaeili, Z., Mirshekaran, M., & Salehi, A. (2013). Design Parallel Fuzzy Partly Inverse Dynamic Method plus Gravity Control for Highly Nonlinear Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(1), 112.
791
Heidari, S., Piltan, F., Shamsodini, M., Heidari, K., & Zahmatkesh, S. (2013). Design New Nonlinear Controller with Parallel Fuzzy Inference System Compensator to Control of Continuum Robot Manipulator. International Journal of Control and Automation, 6(4).
792
Piltan, F., Zare, S., ShahryarZadeh, F., & Mansoorzadeh, M. (2013). Supervised Optimization of Fuel Ratio in IC Engine Based on Design Baseline Computed Fuel Methodology. International Journal of Information Technology and Computer Science (IJITCS), 5(4), 76.
793
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
794
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
795
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
796
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
797
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
798
Shamsodini, M., Manei, R., Bekter, A., Ranjbar, B., & Soltani, S. (2013). Design a New Fuzzy Optimize Robust Sliding Surface Gain in Nonlinear Controller. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 91.
799
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
800
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
801
Movement, F. S. M., & network, A. N. (2013).International journal of electronics and communication engineering & technology (IJECET). Journal Impact Factor, 4(5), 117-125.
802
Anifowose, F., Labadin, J., & Abdulraheem, A. (2013, December). Predicting Petroleum Reservoir Properties from Downhole Sensor Data using an Ensemble Model of Neural Networks. In Proceedings of Workshop on Machine Learning for Sensory Data Analysis (p. 27). ACM.
803
Loko, Y. L., Dansi, A., Dansi, M., Vodouhè, R., & Sanni, A. (2013). Indigenous knowledge and management of yam (Dioscorea cayenensis–Dioscorea rotundata complex) pests and diseases in northern Benin.
804
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
805
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
806
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
807
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Intelligent Robust Fuzzy-Parallel Optimization Control of a Continuum Robot Manipulator. International Journal of Control and Automation, 6(3), 15-34.
808
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
809
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
810
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
811
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
812
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
813
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
814
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
815
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
816
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
817
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
818
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
819
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
820
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
821
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
822
Bayat, R. (2013). Artificial Intelligence SVC Based Control of Two Machine Transmission System. International Journal of Intelligent Systems and Applications (IJISA), 5(8), 1.
823
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
824
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
825
Heidari, K., Piltan, F., Zahmatkesh, S., Heidari, S., & Jafari, M. (2013). Design High Efficiency Intelligent Robust Backstepping Controller. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(6), 22.
826
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
827
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
828
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
829
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
830
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Intelligent Robust Fuzzy-Parallel Optimization Control of a Continuum Robot Manipulator. International Journal of Control and Automation, 6(3), 15-34.
831
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
832
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Adjust the fuel ratio by high impact chattering free sliding methodology with application to automotive engine. International Journal of Hybrid Information Technology, 6(1), 13-24.
833
Piltan, F., Mansoorzadeh, M., Zare, S., Shahryarzadeh, F., & Akbari, M. (2013). Artificial tune of fuel ratio: Design a novel siso fuzzy backstepping adaptive variable structure control. International Journal of Electrical and Computer Engineering (IJECE), 3(2), 171-185.
834
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
835
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
836
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
837
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
838
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
839
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
840
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
841
Jalali, A., Piltan, F., Hashemzadeh, H., Hasiri, A., & Hashemzadeh, M. (2013). Design Novel Soft Computing Backstepping Controller with Application to Nonlinear Dynamic Uncertain System. International Journal of Intelligent Systems and Applications (IJISA), 5(10), 93.
842
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
843
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
844
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
845
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
846
Heidari, K., Piltan, F., Zahmatkesh, S., Heidari, S., & Jafari, M. (2013). Design High Efficiency Intelligent Robust Backstepping Controller. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(6), 22.
847
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
848
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
849
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications (IJISA), 5(2), 59.
850
Elbanhawi, M., & Simic, M. (2013, February). Robotics application in remote data acquisition and control for solar ponds. In Applied Mechanics and Materials (Vol. 253, pp. 705-715).
851
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
852
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
853
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
854
Zahmatkesh, S., Piltan, F., Heidari, K., Shamsodini, M., & Heidari, S. (2013). Artificial Error Tuning Based on Design a Novel SISO Fuzzy Backstepping Adaptive Variable Structure Control. International Journal of Intelligent Systems and Applications (IJISA), 5(11), 34.
855
Kazeminasab, M., Piltan, F., Esmaeili, Z., Mirshekaran, M., & Salehi, A. (2013). Design Parallel Fuzzy Partly Inverse Dynamic Method plus Gravity Control for Highly Nonlinear Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(1), 112.
856
Heidari, S., Piltan, F., Shamsodini, M., Heidari, K., & Zahmatkesh, S. (2013). Design New Nonlinear Controller with Parallel Fuzzy Inference System Compensator to Control of Continuum Robot Manipulator. International Journal of Control and Automation, 6(4).
857
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
858
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
859
Bayat, R. (2013). Artificial Intelligence SVC Based Control of Two Machine Transmission System. International Journal of Intelligent Systems and Applications (IJISA), 5(8), 1.
860
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
861
Park, S., & Rahmdel, S. (2013). A new fuzzy sliding mode controller with auto-adjustable saturation boundary layers implemented on vehicle suspension. Int. J. Eng. C Asp, 26(12), 1401-1410.
862
Piltan, F., Badri, A., Meigolinedjad, J., & Keshavarz, M. (2013). Adaptive Artificial Intelligence Based Model Base Controller: Applied to Surgical Endoscopy Telemanipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(9), 103.
863
Piltan, F., Yarmahmoudi, M., Mirzaie, M., Emamzadeh, S., & Hivand, Z. (2013). Design Novel Fuzzy Robust Feedback Linearization Control with Application to Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(5), 1.
864
Piltan, F., Nabaee, A., Ebrahimi, M., & Bazregar, M. (2013). Design robust fuzzy sliding mode control technique for robot manipulator systems with modeling uncertainties. International Journal of Information Technology and Computer Science (IJITCS), 5(8), 123.
865
Salehi, A., Piltan, F., Mousavi, M., Khajeh, A., & Rashidian, M. R. (2013). Intelligent Robust Feed-forward Fuzzy Feedback Linearization Estimation of PID Control with Application to Continuum Robot. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(1), 1.
866
Piltan, F., Eram, M., Taghavi, M., Sadrnia, O. R., & Jafari, M. (2013). Nonlinear Fuzzy Model-base Technique to Compensate Highly Nonlinear Continuum Robot Manipulator. International Journal of Intelligent Systems and Applications (IJISA), 5(12), 135.
867
Jahed, A., Piltan, F., Rezaie, H., & Boroomand, B. (2013). Design Computed Torque Controller with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. International Journal of Information Engineering & Electronic Business, 5(3).
868
Mirshekaran, M., Piltan, F., Esmaeili, Z., Khajeaian, T., & Kazeminasab, M. (2013). Design Sliding Mode Modified Fuzzy Linear Controller with Application to Flexible Robot Manipulator. International Journal of Modern Education and Computer Science (IJMECS), 5(10), 53.
869
Ebrahimi, M. M., Piltan, F., Bazregar, M., & Nabaee, A. (2013). Artificial Chattering Free on-line Modified Sliding Mode Algorithm: Applied in Continuum Robot Manipulator. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(5), 57.
870
Piltan, F., Emamzadeh, S., Heidari, S., Zahmatkesh, S., & Heidari, K. (2013). Design Artificial Intelligent Parallel Feedback Linearization of PID Control with Application to Continuum Robot. International Journal of Engineering and Manufacturing, 3(2), 51-72.
871
Jalali, A., Piltan, F., Hashemzadeh, M., BibakVaravi, F., & Hashemzadeh, H. (2013). Design Parallel Linear PD Compensation by Fuzzy Sliding Compensator for Continuum Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(12), 97.
872
Piltan, F., Hosainpour, A., Emamzadeh, S., Nazari, I., & Mirzaie, M. (2013). Design Sliding Mode Controller of with Parallel Fuzzy Inference System Compensator to Control of Robot Manipulator. IAES International Journal of Robotics and Automation (IJRA), 2(4), 149-162.
873
Moosavi, M., Eram, M., Khajeh, A., Mahmoudi, O., & Piltan, F. (2013). Design New Artificial Intelligence Base Modified PID Hybrid Controller for Highly Nonlinear System. International Journal of Advanced Science and Technology, 57.
874
Piltan, F., Jafari, M., Eram, M., Mahmoudi, O., & Sadrnia, O. R. (2013). Design Artificial Intelligence-Based Switching PD plus Gravity for Highly Nonlinear Second Order System. International Journal of Engineering and Manufacturing (IJEM), 3(1), 38.
875
Zahmatkesh, S., Piltan, F., Heidari, K., Shamsodini, M., & Heidari, S. (2013). Artificial Error Tuning Based on Design a Novel SISO Fuzzy Backstepping Adaptive Variable Structure Control. International Journal of Intelligent Systems and Applications (IJISA), 5(11), 34.
876
Kazeminasab, M., Piltan, F., Esmaeili, Z., Mirshekaran, M., & Salehi, A. (2013). Design Parallel Fuzzy Partly Inverse Dynamic Method plus Gravity Control for Highly Nonlinear Continuum Robot. International Journal of Intelligent Systems and Applications (IJISA), 6(1), 112.
877
Heidari, S., Piltan, F., Shamsodini, M., Heidari, K., & Zahmatkesh, S. (2013). Design New Nonlinear Controller with Parallel Fuzzy Inference System Compensator to Control of Continuum Robot Manipulator. International Journal of Control and Automation, 6(4).
878
Shamsodini, M., Piltan, F., Jafari, M., reza Sadrnia, O., & Mahmoudi, O. (2013). Design Modified Fuzzy Hybrid Technique: Tuning By GDO. International Journal of Modern Education and Computer Science (IJMECS), 5(8), 58.
879
Piltan, F., Bairami, M. A., Aghayari, F., & Rashidian, M. R. (2013). Stable Fuzzy PD Control with Parallel Sliding Mode Compensation with Application to Rigid Manipulator. International Journal of Information Technology and Computer Science (IJITCS), 5(7), 103.
880
Bazregar, M., Piltan, F., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Information Technology and Computer Science (IJITCS), 6(1), 101.
881
Heidari, K., Piltan, F., Zahmatkesh, S., Heidari, S., & Jafari, M. (2013). Design High Efficiency Intelligent Robust Backstepping Controller. International Journal of Information Engineering and Electronic Business (IJIEEB), 5(6), 22.
882
Piltan, F., Mehrara, S., Meigolinedjad, J., & Bayat, R. (2013). Design Serial Fuzzy Variable Structure Compensator for Linear PD Controller: Applied to Rigid Robot. International Journal of Information Technology and Computer Science (IJITCS), 5(11), 111.
883
Piltan, F., Bazregar, M., Akbari, M., & Piran, M. (2013). Management of Automotive Engine Based on Stable Fuzzy Technique with Parallel Sliding Mode Optimization. International Journal of Advances in Applied Sciences, 2(4), 171-184.
884
GIWA, A., & GIWA, S. O. Investigating the Effects of Operating Parameters of a Reaction Integrated Distillation Process for SAME Production Using Aspen PLUS.
885
Cheng, K. M., & Tsai, J. C. (2013). Optimal statistical tolerance allocation for reciprocal exponential cost–tolerance function. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(5), 650-656.
886
Al-Husban, A. N. (2013). A Numerical Pairs Implementation using Fuzzy Basis Function. European Journal of Scientific Research, 94(2), 172-176.
887
Tornincasa, S., Bonisoli, E., & Di Monaco, F. (2013). Virtual prototyping through multisoftware integration for energy harvester design. Journal of Intelligent Material Systems and Structures, 1045389X13512190.
888
Titus, A., & Liu, X. B. (2013). Secondary Development of Solid works for Standard Components Based on Database. International Journal of Science and Research, 2(10), 162-164.
889
Jie, L., & Gang, H. S. Modification to 3D Model from Exchange Format File Using Visual Basic in SolidWorks.
890
Kaur, D., Bath, S. K., & Sidhu, D. S. Short Circuit Fault Analysis of Electrical Power System using MATLAB.
891
Patil, M. D., & Abukhalil, T. Design and Implementation of Heterogeneous Robot Swarm.
892
Chatzidakis, P. G., Christidis, G. C., & Tatakis, E. C. (2013, September). Comparative study of MPPT algorithms for thermoelectric generators. In Power Electronics and Applications (EPE), 2013 15th European Conference on (pp. 1-8). IEEE.
893
Bucmys, Z., & Sauciuvenas, G. (2013). The behavior of cold formed steel structure connections/Saltai formuotu plieniniu konstrukciju mazgu elgsena. Engineering Structures and Technologies, 5(3), 113-113.
894
Hegne, A. V., & Hegne, P. Design and Power Transmission of Advanced Light Helicopter.
895
Sunay, Y. E., Gülay, E., & Akgül, A. (2013). Numerical Simulations of Store SeparationTrajectories Using the EGLIN Test.
896
On Tang Chin, ROCKETS, & PROJECTILES. (2013). Consider the aerodynamic interference missile launchers buried Trajectory. MISSILES AND GUIDANCE, 33 (3), 138-142.
897
Mohammadi, M., Javidtash, N., & Parhoodeh, M. Stability Enhancement of DFIG Wind Turbines by Parameters Tuning of Shunt Connected Facts Devices Using ITAE index. International Journal on Technical and Physical Problems of Engineering (IJTPE), (14), 82-88.
898
Hambali, N., Janin, Z., Samsudin, N. S. M., & Ishak, A. A. (2013, November). Process controllability for air temperature oven system using open-loop Reformulated Tangent Method. In Smart Instrumentation, Measurement and Applications (ICSIMA), 2013 IEEE International Conference on (pp. 1-6). IEEE.
899
Admuthe, S., & Chile, R. H. Fuzzy and ANN Controller for Stable Temperature of Liquid in Heat Exchanger.
900
da Silva, L. E. R., & Paglione, P. (2013). design of three dimensional automatic flight system for climb, cruise and descent.
901
Tang, Z. M., & Xie, D. (2013, October). Tuning of Ship Heading Controller Based on Minimum Rate of Energy Dissipation and Multi-Attribute Decision Making Method. In Advanced Materials Research (Vol. 765, pp. 1951-1955).
902
Lolu, S. J., Bhatti, S. S., & Sharma, R. K. Approaches for tuning of PID Controller.
903
Bhatia, B. (1956). An Approach to design Proportional Integral Derivative Controller using Internal Model Control for Optimisation of proposed Process Control (Doctoral dissertation, Department of Electrical and Instrumentation Engineering, Thapar University, Patiala).
904
Dalfard, V. M., Kaveh, M., & Nosratian, N. E. (2013). Two meta-heuristic algorithms for two-echelon location-routing problem with vehicle fleet capacity and maximum route length constraints. Neural Computing and Applications, 23(7-8), 2341-2349.
905
Werner, F. (2013). A survey of genetic algorithms for shop scheduling problems. P. Siarry: Heuristics: Theory and Applications, Nova Science Publishers, 161-222.
906
Filho, M. G., de Fátima Morais, M., Boiko, T. J. P., Miyata, H. H., & Varolo, F. W. R. (2013). Scheduling in flow shop with sequence-dependent setup times: literature review and analysis. International Journal of Business Innovation and Research, 7(4), 466-486.
907
Gupta, B., & Dhingra, S. (2013). Analysis of Genetic Algorithm for Multiprocessor Task Scheduling Problem. International Journal, 3(7).
908
Attri, P., Arora, B., & Choi, E. H. (2013). Utility of plasma: a new road from physics to chemistry. RSC Advances, 3(31), 12540-12567.
909
Lin, Y. S., Lin, D. J., Sung, P. J., & Tien, S. W. (2013). Atmospheric-pressure plasma-enhanced chemical vapor deposition of electrochromic organonickel oxide thin films with an atmospheric pressure plasma jet. Thin Solid Films, 532, 36-43.
910
Afshari, R., & Hosseini, H. (2013). Non-thermal plasma as a new food preservation method, Its present and future prospect. Journal of Paramedical Sciences, 5(1).
911
Stoica, M., Mihalcea, L., Borda, D., & Alexe, P. (2013). Non-thermal novel food processing technologies. An overview. Journal of Agroalimentary Processes and Technologies, 19(2), 212-217.
912
Gaikwad, V., Kennedy, E., Mackie, J., Holdsworth, C., Molloy, S., Kundu, S., & Dlugogorski, B. (2013). Non-Oxidative Conversion of 1, 2-Dichloroethane in a Non-Thermal Plasma and Characterisation of the Polymer Formed. Plasma Processes and Polymers, 10(2), 141-149.
913
Babij, M., Gotszalk, T., Kowalski, Z. W., Nitsch, K., Silberring, J., & Smoluch, M. (2013, July). Miniature plasma jet for mass spectrometry. In Electron Technology Conference 2013 (pp. 890208-890208). International Society for Optics and Photonics.
914
Rehman, F., Abdul Majeed, W. S., & Zimmerman, W. B. (2013). Hydrogen production from water vapor plasmolysis using DBD-Corona hybrid reactor. Energy & Fuels, 27(5), 2748-2761.
915
Aleknaviciute, I., Karayiannis, T. G., Collins, M. W., & Xanthos, C. (2013). Methane decomposition under a corona discharge to generate CO x-free hydrogen. Energy, 59, 432-439.
916
Gaikwad, V., Kennedy, E., Mackie, J., Holdsworth, C., Molloy, T., Kundu, S., & Dlugogorski, B. (2013, June). Reaction of chloroform in a non-oxidative atmosphere using dielectric barrier discharge. In Pulsed Power Conference (PPC), 2013 19th IEEE (pp. 1-6). IEEE.
917
García-Alcantara, E., López-Callejas, R., Serment-Guerrero, J., Peña-Eguiluz, R., Muñoz-Castro, A. E., Rodríguez-Méndez, B. G., ... & Barbabosa-Pliego, A. (2013). Toxicity and Genotoxicity in HeLa and E. coli Cells Caused by a Helium Plasma Needle. Applied Physics Research, 5(5), 21.
918
Barni, R., Biganzoli, I., Dell’Orto, E., & Riccardi, C. Letters in Applied NanoBioScience. Letters in Applied NanoBioScience, 167.
919
Cloth Fumiya. (2013). Generation of atmospheric pressure non-equilibrium plasma. Journal of Kyushu Kyoritsu University Research Institute No.
920
Stoica, M., Mihalcea, L., Borda, D., & Alexe, P. (2013). Non-thermal novel food processing technologies. An overview. Journal of Agroalimentary Processes and Technologies, 19(2), 212-217.
921
Bo Chun, XIA Jing-bo, Wu Jixiang, Ren Gaoming, & ZHAO Xiao Huan. (2013). Summary of network traffic in real-time classification of Computer Science, 40 (9), 8-15.
922
Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., & Kenny, J. M. (2013). Cellulose nanocrystals extracted from okra fibers in PVA nanocomposites. Journal of Applied Polymer Science, 128(5), 3220-3230.
923
Begum, K., & Islam, M. A. (2013). Natural fiber as a substitute to synthetic fiber in polymer composites: a review. Research Journal of Engineering Sciences ___________________________________________ ISSN, 2278, 9472.
924
Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., Foresti, M. L., ... & Kenny, J. M. (2013). Okra (Abelmoschus esculentus) fibre based PLA composites: mechanical behaviour and biodegradation. Journal of Polymers and the Environment, 21(3), 726-737.
925
High Cong, Li Min, Wang Juan, Yanxia, Gu Yizhuo, Sun Zhijie, light & Zuo. (2013). Effect of chemical treatment and water absorbent sisal fiber and resin interfacial properties. Composite Materials, 30 (5), 21 -28.
926
Bai Yifeng, & Tong Wen Qing. (2013). Application of plant fiber processing properties and its composites progress and application of high-tech fibers, (3), 62-67.
927
Hosseini, M., Dincer, I., Ahmadi, P., Avval, H. B., & Ziaasharhagh, M. (2013). Thermodynamic modelling of an integrated solid oxide fuel cell and micro gas turbine system for desalination purposes. International Journal of Energy Research, 37(5), 426-434.
928
Zabihian, F., & Fung, A. S. (2013). Performance analysis of hybrid solid oxide fuel cell and gas turbine cycle: application of alternative fuels. Energy Conversion and Management, 76, 571-580.
929
Ugartemendia, J., Ostolaza, J. X., & Zubia, I. (2013). Operating point optimization of a hydrogen fueled hybrid solid oxide fuel cell-steam turbine (SOFC-ST) plant. Energies, 6(10), 5046-5068.
930
Arab, G., & Ghadamian, H. (2013). A technical assessment of the CO2 capture modeling for GT/SOFC/CHP hybrid cycles. In 6th Iranian Fuel Cell Seminar, Tehran.
931
Huang, T. A. (2013). Integrated Nuclear Power Generation Project.
932
Park, S. K. (2013). A study on temperature characteristic of the gases supplied to SOFC system by utilizing the ship exhaust gas. Journal of the Korean Society of Marine Engineering, 37(8), 822-828.
933
Milewski, J. (2013). Zagadnienia modelowania matematycznego tlenkowych ogniw paliwowych. Prace Naukowe Politechniki Warszawskiej. Mechanika, (250), 3-195.
934
Baksanggyun. (2013). Study on the characteristics of the vessel temperature SOFC systems supply gas according to the exhaust gas utilization. Korea Society of Marine Engineers, 37 (8), 822-828.
935
Gaikwad Madhurar, V., & Mangulkar Madhuri, N. Comparison between Static and Dynamic Analysis of Elevated Water Tank.
936
Threepopnartkul, K., & Suvanjumrat, C. development and validation of C ++ object-oriented way ? the CFD to simulate a spill of fluids in two dimensions.
937
Vehículos, e. l. e., la, c. m. p., & de vuelco, d. d. u. ingenieros industriales.
938
Nidheesh, P. V., Gandhimathi, R., & Ramesh, S. T. (2013). Degradation of dyes from aqueous solution by Fenton processes: a review. Environmental Science and Pollution Research, 20(4), 2099-2132.
939
Ghafoori, S., Mehrvar, M., & Chan, P. K. (2013). Photoassisted Fenton-like degradation of aqueous poly (acrylic acid): from mechanistic kinetic model to CFD modeling. Chemical Engineering Research and Design, 91(12), 2617-2629.
940
Verma, A., Sheoran, M., & Toor, A. P. (2013). Titanium dioxide mediated photocatalytic degradation of malathion in aqueous phase. Indian Journal of Chemical Technology, 20(1), 46-51.
941
Verma, A., Kaur, H., & Dixit, D. (2013). Photocatalytic, sonolytic and sonophotocatalytic degradation of 4-chloro-2-nitro phenol. Archives of Environmental Protection, 39(2), 17-28.
942
Ebenezer, A. V., Arulazhagan, P., Banu, J. R., & Kumar, S. A. (2013). Coupled ozonation with aerobic sequential batch reactor for treatment of distillery wastewater. Int. J. Curr. Microbiol. App. Sci, 2(6), 137-145.
943
Zakersalehi, A., Choi, H., Andersen, J., & Dionysiou, D. D. (2013). Photocatalytic ceramic membranes. Encyclopedia of Membrane Science and Technology.
944
Loures, C. C., Alcântara, M. A., Izário Filho, H. J., TEIXEIRA, A., Silva, F. T., Paiva, T. C., & Samanamud, G. R. (2013). Advanced oxidative degradation processes: fundamentals and applications. Int Rev Chem Eng, 5, 102-120.
945
Schneider, R. C., Bjerk, T. R., Gressler, P. D., Souza, M. P., Corbelline, V. A., & Lobo, E. A. (2013). Potential production of biofuel from microalgae biomass produced in wastewater. Biodiesel–Feedstocks, Production and Applications.
946
Ghafoori, S. (2013). MODELING, SIMULATION, AND OPTIMIZATION OF ADVANCED OXIDATION PROCESSES FOR TREATMENT OF POLYMERIC WASTEWATER (Doctoral dissertation, Ryerson University).
947
Chang, H. (2013). Synthesis and characterisation of nanostructured BiFeO3 for photodecolourisation of azo dyes using visible light.
948
Alexander, J. C., Ramírez-Cortina, C. R., González, O., & Esplugas, S. Biodegradability Enhancement of an Aqueous Solution of 2, 5-dichlorophenol by Advance Oxidation Process.
949
Piltan, F., Piran, M., Bazregar, M., & Akbari, M. (2013). Design High Impact Fuzzy Baseline Variable Structure Methodology to Artificial Adjust Fuel Ratio. International Journal of Intelligent Systems and Applications, 5(2), 59.
950
Omori Takashiichi. (2013). Workplace layout techniques using chaos optimization.
951
Dong Peng, Zhangyi Tao, Tangzheng Kang, para wish, Wu Mei, Yin Xiaotian, & Ji Hongliang. (2013). Preparation area layout in manufacturing semi-finished products and logistics optimization. Group Technology & Production Modernization, (1), 5-12.
952
Dong Peng, Zhangyi Tao, Tangzheng Kang, para wish, Wu Mei, Yin Xiaotian, Hong Ji & bright. (2013). Manufacturing semi-finished products preparation area layout and logistics optimization. The new materials industry, (3), 66-72.
953
Manufacturing semi-finished products preparation area layout and logistics optimization Dong Peng, Zhangyi Tao, Liu Lijun, Fu Chaokui, Wei Huafeng, Hanzhen Chang, & Jiang Jia. (2013) study (ii) Heilongjiang Food, (4), 49-52.
954
Febrianti, M. S., & Putra, A. R. (2013). The E-internal audit iso 9001: 2008 based on accreditation form assessment matrix in study program for effectiveness of monitoring accreditation. International Journal of Engineering Science and Technology Development (IJEST), 1(3), 84-88.
955
Chakraborty, A., Ghosh, S., & Sarkar, G. Importance of Six Sigma in Medium Manufacturing Enterprises.
956
Mendes, L. A. F. (2013). Senior managers and smes'propensity to quality improvement programs-a comparative analysis. E+ M Ekonomie a Management, (4), 89.
957
Braun, V., Flegel, S., Gelhaus, J., Möckel, M., Kebschull, C., Radtke, J., ... & Vörsmann, P. (2013). Orbital lifetime estimation using ESA’s OSCAR tool.
958
Alagarsamy, K. (2012). CONSITEPLAN–A Multi-Objective Construction Site Utilization Planning Tool (Doctoral dissertation, Auburn University).
959
Ripon, K. S. N., Glette, K., Khan, K. N., Hovin, M., & Torresen, J. (2012). Swarm and Evolutionary Computation.
960
Dr. M. Hammoshi, “Measuring OLSR Performance Factors With Different Scale Networks” International Journal of Advancements in Computing Technology (IJACT), 4(1), pp. 116-126, January 2012.
961
Y. Shao, Y. Wang and N. Chi, “Seamless Integration of RZ-DPSK-DWDM Optical Links with MIMO-OFDM System for 4th Generation Wide-Area Coverage Mobile Communication”, Engineering Future Wireless Networks and Information Systems Lecture Notes in Electrical Engineering, Vol. 143, pp. 361-367, 2012.
962
A.B. Mattos, T.A. Freitas, V.L. Silva, R.F. Dutra, “A Dual Quartz Crystal Microbalance For Human Cardiac Troponin T In Real Time Detection”, Sensors and Actuators B: Chemical, 161(1), pp. 439–446, January 2012.
963
Das, S. (1926). Assumptions in Quantum Mechanics. International Journal of Theoretical and Mathematical Physics, 3(2), 53-68.
964
2. A.S. Bornschlegell, J. Pellé, S. Harmand, Bekrar, S. Chaabane and D. Trentesaux, “Thermal optimization of a single inlet T-junction’, International Journal of Thermal Sciences, 53, pp. 108–118, March 2012
965
L. Hou, H. Li, P. Yu and G. Liang, “A New Multi-disciplinary Robust Optimization Method for Micro Re-entering Lifting-Body Design”, Engineering Recent Advances in Computer Science and Information Engineering Lecture Notes in Electrical Engineering, 126, pp. 515-524, 2012.
966
Giuseppe Pezzella , “Aerodynamic Design of the Vertical Takeoff Hopper Concept of Future Launchers Preparatory Programme”, Applied Computational Fluid Dynamics, pp. 177-200.
967
V. M. Dalfard, M. Ahmadpour, O. Jalilian and H. Jalilian, “Optimization of net present value of total net profits of client and contractor in payments of client to contactor by the use of hybrid genetic algorithm”, African Journal of Business Management, 6(5), pp. 2034-2042, Feb. 2012.
968
G. Bassioni, “A study towards “greener” construction”, Applied Energy, Volume 93, pp. 132–137, May. 2012.
969
G. Bassioni and M. M. Ali, “Studying the physico-chemical properties of commercially available oil-well cement additives using calorimetry”, Journal of Thermal Analysis and Calorimetry, Feb. 2012.
970
Saleeb, N., & Defoulas, G. (2012). Architectural Evolution of E-Learning Virtual Worlds. Engaging the Avatar, 49-80.
971
Saleeb, N. Noha Saleeb, Georgios Dafoulas.
972
Sikdar, A., Roy, P., Mukherjee, S., Das, M., & Banerjee, S. (2012). AFeature Based chain code method for identifying printed bengali characters.
973
Agrawal, P., Kaur, H., & Singh, G. (2012). Indexed Tree Sort: An Approach to Sort Huge Data with Improved Time Complexity. International Journal of Computer Applications, 57(18).
974
Ojo, O. O., Ogedengbe, T. I., & Kareem, B. (2012). Effect of Cutting Conditions on Release Time of Jobs Using Lathe Machine. International Journal of Engineering Innovation and Management, 2(3), 59-66.
975
Burger, M. (2012). Mechanisms for Task Allocation in Swarm Robotics (Doctoral dissertation, Diploma thesis, Ludwig-Maximilians-Universität München).
976
Kahtan, H., Bakar, N. A., & Nordin, R. (2012, October). Reviewing the challenges of security features in component based software development models. In E-Learning, E-Management and E-Services (IS3e), 2012 IEEE Symposium on (pp. 1-6). IEEE.
977
Mwesigwa, J. B. (2012). Motor vehicle pedestrian mortality in Soweto from 2001 to 2005 (Doctoral dissertation).
978
Patil, S. S., Ogale, R. A., & Dwivedi, A. K. (2012). Performances of Chicken Mesh on Strength of Beams Retrofitted Using Ferrocement Jackets. Journal of Engineering, 2, 1-10.
979
Suganthi, S., Raghavan, S., Kumar, D., & Thilagar, S. H. (2012, March). A compact hilbert curve fractal antenna on metamaterial using CSRR. In PIERS Proceedings (pp. 136-140).
980
Suganthi, S., Raghavan, S., Kumar, D., & Arputha Vijaya Selvi, J. (2012). Study of Compact Hilbert Curve Fractal Antennas for Implantable Medical Applications. International Journal of Emerging Technology and Advanced Engineering, 2(10), 116-125.
981
Lin, Y. C., & Zhong, J. H. (2012, September). Hilbert-Chain Topology for Energy Conservation in Large-Scale Wireless Sensor Networks. In Ubiquitous Intelligence & Computing and 9th International Conference on Autonomic & Trusted Computing (UIC/ATC), 2012 9th International Conference on (pp. 225-232). IEEE.
982
Suganthi, S., Raghavan, S., Kumar, D., & Arputha Vijaya Selvi, J. (2012). Experimental Study on the Performance of Compact Hilbert Curve Fractal Antenna on Metamaterial using CSRR. European Journal of Scientific Research (EJSR), Europe, 86(2), 243-253.
983
Malik, R. F., Rahman, T. A., Ngah, R., Mohd, S. Z., & Hashim, H. (2012). The new multipoint relays selection in OLSR using particle swarm optimization. TELKOMNIKA (Telecommunication Computing Electronics and Control), 10(2), 343-352.
984
Mostafavi, M. A., Moghanjoughi, A. A., & Mousavi, H. (2012). A Review and Performance Analysis of Reactive and Proactive Routing Protocols on MANET. Network and Communication Technologies, 1(2), p48.
985
Hammoshi, M. (2012). Measuring OLSR Performance Factors With Different Scale Networks. International Journal of Advancements in Computing Technology, 4(1).
986
Toutouh, J., & Alba, E. (2012, July). Green OLSR in VANETs with differential evolution. In Proceedings of the 14th annual conference companion on Genetic and evolutionary computation (pp. 11-18). ACM.
987
Aggarwal, R. R. (2012). Design and performance evaluation of a new irregular fault-tolerant multistage interconnection network. Int J Computer Sci, 9.
988
Sharma, S. (2012, January). On bandwidth capabilites of multiprocessor interconnection networks. In Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications (PDPTA) (p. 1). The Steering Committee of The World Congress in Computer Science, Computer Engineering and Applied Computing (WorldComp).
989
Panigrahy, R. K., Mahalik, N. P., Mishra, R. K., & Patnaik, S. (2012). Steel plant production line automation strategy using advanced distributed control and convergent technology. International Journal of Automation and Control, 6(2), 157-173.
990
Ionel, R., Vasiu, G., & Mischie, S. (2012). GPRS based data acquisition and analysis system with mobile phone control. Measurement, 45(6), 1462-1470.
991
Pandya, V., & Shukla, D. (2012). vGSM Modem Based Data Acquisition System. International Journal of Computational Engineering Research.
992
Siddique, A. H., Barkat, B., & Poshtan, M. (2012, November). Experimental setup of wide area monitoring using Zigbee IEEE 802.15. 4 technology and RF FM technique. In Sustainable Technologies (WCST), 2012 World Congress on (pp. 44-48). IEEE.
993
Suakanto, S., Supangkat, S. H., Saragih, R., & Nugroho, T. A. (2012, April). Environmental and disaster sensing using cloud computing infrastructure. In Cloud Computing and Social Networking (ICCCSN), 2012 International Conference on (pp. 1-6). IEEE.
994
Khera, N., & Balguvhar, S. Development of a simple microcontroller based real-time data acquisition and alert system in labview tm environment.
995
Sylvestre-Williams, B., & Mehrvar, M. (2012). An air dispersion model for the city of Toronto, Ontario, Canada. Journal of Environmental Science and Health, Part A, 47(8), 1123-1137.
996
Bornschlegell, A. S., Pelle, J., Harmand, S., Bekrar, A., Chaabane, S., & Trentesaux, D. (2012). Thermal optimization of a single inlet T-junction. International Journal of Thermal Sciences, 53, 108-118.
997
Ponomarev, P., Polikarpova, M., & Pyrhönen, J. (2012, June). Conjugated fluid-solid heat transfer modeling of a directly-oil-cooled PMSM using CFD. In Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2012 International Symposium on (pp. 141-145). IEEE.
998
Picazo-Rodenas, M. J., Royo, R., Antonino-Daviu, J., & Roger-Folch, J. (2012, September). Use of infrared thermography for computation of heating curves and preliminary failure detection in induction motors. In Electrical Machines (ICEM), 2012 XXth International Conference on (pp. 525-531). IEEE.
999
Ghasemi, A., & Mashhadi, M. R. (2012, May). Domestic Micro Combined Heat and Power: Saving energy and carbon. In Electrical Power Distribution Networks (EPDC), 2012 Proceedings of 17th Conference on (pp. 1-6). IEEE.
1000
Passow, U., & Carlson, C. A. (2012). The biological pump in a high CO2 world. Mar. Ecol. Prog. Ser, 470(2), 249-271.
1001
Casoni, E., Peraire, J., & Huerta, A. (2012). Un método de captura de choques basado en las funciones de forma para Galerkin discontinuo de alto orden. Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, 28(4), 204-213.
1002
Ayag, Z., Samanlioglu, F., & Yücekaya, A. (2012). Intelligent approach to simulation software evaluation.
1003
Ayag, Z., Samanlioglu, F., & Yücekaya, A. (2012). Intelligent approach to simulation software evaluation.
1004
Hossain, M. E. (2012).Comprehensive modeling of complex petroleum phenomena with an engineering approach. Journal of Porous Media, 15(2).
1005
Khan, M. A. Saqaff Ahmed Alkaff saqaff@ yemen. net. ye. International Journal of Engineering (IJE), 4(2), 139.
1006
Prabakaran, R., Arivazhagan, S., & Prabakaran, S. (2012). Power estimation techniques for embedded and VLSI system: A survey.
1007
Brihi, A. A. H. Investigation into the dependency between resource utilization, power consumption and performance in Multimedia servers.
1008
Singh, H., Prakash, J., Arora, D., & Wason, A. (2012). Wavelength assignment algorithms in OBS networks. Optik-International Journal for Light and Electron Optics, 123(20), 1823-1825.
1009
Ghervase, L. U. M. I. N. I. T. A., Cordier, A. N. G. E., Ibalot, F. A. B. I. E. N. N. E., & Parlanti, E. (2012). Storage effect on fluorescence signal of dissolved organic matter components. Romanian Reports in Physics, 64(3), 754-760.
1010
Jafari, M. H., & Rafii, Y. Hossein Nasiri, Ali Darvishi Boloorani, Hassan Ali Faraji Sabokbar, Hamid Reza.
1011
Çömez, N., Çakanyildirim, M., & Stecke, K. E. (2012). Optimal transshipments and reassignments under periodic or cyclic holding cost accounting. Journal of the Operational Research Society, 64(10), 1517-1539.
1012
Fernandes, R., Pinho, C., & Gouveia, B. (2012). Network Modelling and Simulation for Scheduling Problems Under Restrictions in Invested Capital. Network, 1(11), 50-62.
1013
Darman, W. N. I. W., Baba, M. D., & Ali, D. M. (2012, December). Performance study on relay station usage in IEEE 802.16 j mobile multi-hop relay network. In Computer Applications and Industrial Electronics (ISCAIE), 2012 IEEE Symposium on (pp. 218-223). IEEE.
1014
Hasegawa, G., Tanaka, S., Taniguchi, Y., & Nakano, H. (2012). Time Slot Assignment Algorithms to Upstream Links for Decreasing Transmission Latency in IEEE 802.16 j Networks. IEICE transactions on communications, 95(5), 1793-1801.
1015
González Salcedo, L. O., Guerrero Zúñiga, A. P., Delvasto Arjona, S., Will, E., & Luis, A. (2012).Exploring artificial neural networks to estimate compressive strength of steel fiber-reinforced concrete. Ciencia e Ingeniería Neogranadina, 22(1), 19-41.
1016
Salcedo, L. O. G., Zúñiga, A. P. G., Arjona, S. D., & Will, A. L. E. (2012). Red Neuronal Artificial para estimar la resistencia a compresión, en concretos fibro-reforzados con polipropileno [Artificial neural network to predict the compressive strength, in polypropylene fiber-reinforced concrete]. Ventana Informática, (26).
1017
Namazirad, M. (2012). Investigation into properties of unburned carbon in coal combustion fly ash.
1018
Chou, J. S., & Tsai, C. F. (2012). Concrete compressive strength analysis using a combined classification and regression technique. Automation in Construction, 24, 52-60.
1019
Kabir, A., Hasan, M., & Miah, M. K. (2012, January). Predicting 28 Days Compressive Strength of Concrete from 7 Days Test Result. In International Conference on Advances in Design and Construction of Structures.
1020
Kulkarni, M. S., & Kulkarni, K. S. Concrete Compressive Strength Prediction by ANN.
1021
Salcedo, L. O. G., Zúñiga, A. P. G., Arjona, S. D., & Will, A. L. E.Exploración con redes neuronales artificiales para estimar la resistencia a la compresión, en concretos fibroreforzados con acero exploring artificial neural networks to estimate compressive strength of steel fiber-reinforced concrete.
1022
Bassioni, G. (2012). A study towards “greener” construction. Applied Energy, 93, 132-137.
1023
Coelho, S. A. G. B. P. (2012). Estudo das propriedades dos adjuvantes na compatibilidade/robustez cimento/adjuvante.
1024
Kheribet, R., Samar, M., Benmounah, A., Safi, B., & Said, M. (2012). Effects of alkaline and alkaline-earth ions on the rheological behavior and zetametric study of two cement pastes (artificial cement portland-CEMI and cement resistant to the sulfates-CRS) with the polynaphthalene sulfonate (PNS).
1025
Ghouse Basha, T. S., Aloysius, G., Rajakumar, B. R., Prasad, G., & Sridevi, P. V. (2012). A constructive smart antenna beam-forming technique with spatial diversity. Microwaves, Antennas & Propagation, IET, 6(7), 773-780.
1026
Dalli, A., Zenkouar, L., & Bri, S. (2012). Comparison of circular sector and rectangular patch antenna arrays in C-Band.
1027
Ghouse Basha, T. S., Giri Prasad, M. N., & Sridevi, P. V. (2012). Hybrid technique for beam forming in smart antenna with spatial diversity. International Journal of Wireless and Mobile Computing, 5(2), 126-136.
1028
Basha, T. G., Prasad, M. G., & Sridevi, P. V. (2012). Beam forming in smart antenna with improved gain and suppressed interference using genetic algorithm. Central European Journal of Computer Science, 2(1), 33-46.
1029
Mangkoedihardjo, S., & April, S. (2012). Compost On Evapotranspiration Bed Planted With Yellow Flag For Treatment Of Wastewater Containing Anionic Surfactant. Journal of Applied Sciences Research, 8(3), 1630-1633.
1030
Hossain, M. E. (2012).Comprehensive modeling of complex petroleum phenomena with an engineering approach. Journal of Porous Media, 15(2).
1031
Kumar, J., Rai, J. N., & Hasan, N. (2012, December). Use of Phasor Measurement Unit (PMU) for large scale power system state estimation. In Power Electronics (IICPE), 2012 IEEE 5th India International Conference on (pp. 1-5). IEEE.
1032
Kumar, J., Rai, J. N., Vipin, B. B., & Singh, C. K. (2012, October). Improvement In Power System State Estimation By Use Of Phasor Measurement Unit. In International Journal of Engineering Research and Technology (Vol. 1, No. 8 (October-2012)). ESRSA Publications.
1033
Pan, J. N., & Chen, S. C. (2012). A new approach for assessing the correlated risk. Industrial Management & Data Systems, 112(9), 1348-1365.
1034
Das, T., & Senapati, N. (2012). • Unsteady effect on free convective flow with heat, mass transfer and chemical Reaction. International Research Journal of Pure Algebra ISSN: 2248-9037, 2(11).
1035
Orazalin, Z. Y. (2012). Three-dimensional finite element analysis of a complex excavation on the MIT campus (Doctoral dissertation, Massachusetts Institute of Technology).
1036
Sharma, I., & Singh, G. (2012). A Novel Approach for Spectrum Access Using Fuzzy Logic in Cognitive Radio. International Journal of Information Technology and Computer Science (IJITCS), 4(8), 1.
1037
Nikhil, R. S. (2012, July). Advancement in nanotechnology and its major issues. In Engineering Education: Innovative Practices and Future Trends (AICERA), 2012 IEEE International Conference on (pp. 1-6). IEEE.
1038
Hossain, M. R., & Karmokar, D. K. (2012). Dual-band Inverted-F Antenna for Military and Intelligent Transportation System Applications.
1039
Hassan, M., & Naimullah, B. S. S. (2012, December). Measurement of WLAN strength and evaluation of BER in OFDM based on indoor propagation. In Computer Applications and Industrial Electronics (ISCAIE), 2012 IEEE Symposium on (pp. 224-228). IEEE.
1040
Avila, J., Vinoth, E., Praveen, E., & Thenmozhi, K. (2012, March). Performance augment of multiband OFDM system with ANN assisted concatenated codes. In Computing, Electronics and Electrical Technologies (ICCEET), 2012 International Conference on (pp. 676-681). IEEE.
1041
Patidar, L. C., Parikh, A., Patidar, R. D., & Joshi, A. (2012, March). BER comparison of DCT-OFDM and DFT-OFDM for different modulation techniques in multipath Rayleigh fading environment. In Engineering and Systems (SCES), 2012 Students Conference on (pp. 1-5). IEEE.
1042
Roy, T. K. Comparative BER Performance Analysis of OFDM System Using M-PSK and M-QAM Modulation Schemes over AWGN Channel. IJCCNet, 1(4), 1-5.
1043
Mishra, A. K., & Pandey, R. A Performance Enhancement in BER for OFDM System Based on Using M-QAM Technique.
1044
Sharma, M., & Khola, R. K. (2012). Fuzzy logic based handover decision system. Journal of Adhoc, Sensor & Ubiquitous Computing, 3(4), 21-29.
1045
Sharma, M., & Khola, R. K. (2012). Pre decision based handoff in multi network environment. In Advances in Computer Science, Engineering & Applications (pp. 609-616). Springer Berlin Heidelberg.
1046
Saleeb, N., & Dafoulas, G. (2012). Architectural evolution of e-learning virtual worlds: proposed design measures to enhance the e-learning experience within 3D learning spaces.
1047
Saleeb, N. (2012). Georgios Dafoulas. Blended Learning Environments for Adults: Evaluations and Frameworks: Evaluations and Frameworks, 50.
1048
Abou-Senna, H. A. (2012). Microscopic Assessment of Transportation Emissions on Limited Access Highways (Doctoral dissertation, University of Central Florida Orlando, Florida).
1049
Chiekh, M. B., Ferchichi, M., & Béra, J. C. (2012). Aerodynamic flow vectoring of a wake using asymmetric synthetic jet actuation. Experiments in fluids, 53(6), 1797-1813.
1050
Al Qadi, I., Khalid, M., & Salah, H. (2012). Airfoil performance studies with a trailing edge jet flap. In AIAA 51st Aerospace Meeting, Grapevine, Texas.
1051
Perry, M., & Miklosovic, D. (2012, November). Tip Flowfield of a Low Aspect Ratio Circulation Control Wing With Spanwise Variation in Efflux. In ASME 2012 International Mechanical Engineering Congress and Exposition (pp. 443-453). American Society of Mechanical Engineers.
1052
Miklosovic, D., Imber, R., Britt-Crane, M., & Colantonio, K. Mid-span PIV Measurements of a Low Aspect Ratio Circulation Control Wing. In 30th AIAA Applied Aerodynamics Conference (p. 2893).
1053
Sakthivel, P. B., & Jagannathan, A. (2012). Fibrous Ferrocement Composite with PVC-coated weld mesh and bar-chip polyolefin fibers. International Journal of EOMATE, 3(2), 381-388.
1054
González Salcedo, L. O., Guerrero Zúñiga, A. P., Delvasto Arjona, S., Will, E., & Luis, A. (2012).Exploring artificial neural networks to estimate compressive strength of steel fiber-reinforced concrete. Ciencia e Ingeniería Neogranadina, 22(1), 19-41.
1055
Salcedo, L. O. G., Zúñiga, A. P. G., Arjona, S. D., & Will, A. L. E. (2012). Red Neuronal Artificial para estimar la resistencia a compresión, en concretos fibro-reforzados con polipropileno [Artificial neural network to predict the compressive strength, in polypropylene fiber-reinforced concrete]. Ventana Informática, (26).
1056
Salcedo, L. O. G., Zúñiga, A. P. G., Arjona, S. D., & Will, A. L. E.Exploración con redes neuronales artificiales para estimar la resistencia a la compresión, en concretos fibroreforzados con acero exploring artificial neural networks to estimate compressive strength of steel fiber-reinforced concrete.
1057
Abbes, F., Amor, N. B., & Frikha, T. (2012). Design of an adaptive 3D graphics embedded system. In Embedded and Multimedia Computing Technology and Service (pp. 39-54). Springer Netherlands.
1058
Izhan, I. M., Syahrullail, S., Azwadi, C. S. N., & Jaafar, M. N. M. Wear behavior of titanium alloy lubricated with palm olein as bio-lubricant using pin-on-disk tester.
1059
Tyagi, R., & Agrawal, D. (2012). Analysis the results of Acoustic Echo Cancellation for speech processing using LMS Adaptive Filtering Algorithm. International Journal of Computer Applications, 56(15).
1060
Palmer, J. E., & Searle, S. J. (2012, May). Evaluation of adaptive filter algorithms for clutter cancellation in passive bistatic radar. In Radar Conference (RADAR), 2012 IEEE (pp. 0493-0498). IEEE.
1061
Kaur, R., Singh, G., Dhaliwal, B. S., & Gill, S. S. (2012, December). Implementation of modified variable step size least mean square algorithm in LabVIEW. In Computational Intelligence & Computing Research (ICCIC), 2012 IEEE International Conference on (pp. 1-4). IEEE.
1062
Appuhamy, J. M. R. S., Ohga, M., Chun, P., & Dissanayake, P. B. R. Consequence of Corrosion on Dynamic Behaviour of Steel Bridge Members.
1063
Gencturk, B., & Attar, A. Material Durability Performance of Reinforced Concrete Dry Cask Storage Systems for Nuclear Waste.
1064
Bonhomme, C., Arnould, G., & Khadraoui, D. (2012, December). Dynamic carpooling mobility services based on secure multi-agent platform. In Global Information Infrastructure and Networking Symposium (GIIS), 2012 (pp. 1-6). IEEE.
1065
Dotoli, m., zangar, n., & tahon, c. manel sghaier.
1066
Madhak, N. N., Chauhan, S. G., & Varnagar, C. R. Understanding the Scope of Web Mining-Comprehensive Study. In National Conference on Emerging Trends in Computer & Electrical Engineering.
1067
Vyavahare, R. T., & Kallurkar, S. (2012). Anthropometric and strength data of Indian agricultural workers for equipment design: a review. Agricultural Engineering International: CIGR Journal, 14(4), 102-114.
1068
Bailey, C., Pemmaraju, K., Phan, M., Radhakrishnan, A., & Thomas, A. Plasma-assisted hand sterilization and disinfection.
1069
Khatri, J. K., & Kumar, J. Soft computing technique for product design suggestion in smart manufacturing industry.
1070
Authority, E. P. Assessment and Design Proposal for Establishment and Maintenance of A National CRG E Registry System for Ethiopia.
1071
Salem, A., Kardous, Z., Braiek, N. B., & Ragot, J. (2012). On the state observer based stabilization of Takagi-Sugeno systems with immeasurable premise variables. International Journal of Control, Automation and Systems, 10(6), 1153-1163.
1072
Yaemprayoon, S., Mitsuntisuk, C., Ohishi, K., & Srinoncha, J. (2012). Novel Method to Control Temperature on Aluminum SideUsing Customized Proportional Controller Based onDisturbance Observer. International Journal of Information and Electronics Engineering, 2(2), 112.
1073
Ali, A., & Alaoui, C. (2012). FPGA-based control of thermoelectric coolers for laser diode temperature regulation. International Journal of Engineering Science and Technology, 4(4).
1074
Cernaianu, M. O., & Gontean, A. (2012, November). Thermoelectric modules thermal conductance measurement system. In Electronics and Telecommunications (ISETC), 2012 10th International Symposium on (pp. 41-44). IEEE.
1075
Bornschlegel, A. (2012). aerothermal optimization of an alternator with salient poles for the distributed generation of electricity (Doctoral dissertation, University of Valenciennes and Hainaut-Cambresis).
1076
Saldías, D. A. P., de Mello Roesler, C. R., & Martins, D. (2012). Mecánica Computacional, Volume XXXI. Number 24. Computational Modeling in Bioengineering and Biomedical Systems (B).
1077
Cardona, A., Kohan, P. H., Quinteros, R. D., & Storti, M. A. (2012). A human knee joint model based on screw theory and its relevance for preoperative planning.
1078
Kazadi, S., Arzani, A., Schwartz, A., Pak, J., Cho, S., Huang, J., ... & Koh, A. (2012, June). A membrane-enabled solar heat pipe for solar thermal water heating. In Environment Friendly Energies and Applications (EFEA), 2012 2nd International Symposium on (pp. 173-178). IEEE.
1079
Awad, A., El-Sayed, M., & El-Sonbaty, Y. (2012). Approximating User's Intention for Search Engine Queries. In WEBIST (pp. 422-425).
1080
Piltan, F., Siamak, S., Bairami, M. A., & Nazari, I. (2012). Gradient descent optimal chattering free sliding mode fuzzy control design: LYAPUNOV approach. International Journal of Advanced Science and Technology, 43, 73-90.
1081
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1082
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1083
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1084
Piltan, F., Nazari, I., Siamak, S., & Ferdosali, P. (2012). Methodology of FPGA-based mathematical error-based tuning sliding mode controller. International Journal of Control and Automation, 5(1), 89-118.
1085
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Methodology of Mathematical Error-Based Tuning Sliding Mode Controller. International Journal of Engineering, 6(2), 96-117.
1086
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1087
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1088
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1089
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1090
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1091
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1092
Piltan, F., Rahmdel, S., Mehrara, S., & Bayat, R. (2012). Sliding mode methodology vs. Computed torque methodology using matlab/simulink and their integration into graduate nonlinear control courses. International Journal of Engineering, 6(3), 142-177.
1093
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1094
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1095
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1096
Piltan, F., Piran, M., Akbari, M., & Barzegar, M. (2012). Baseline Tuning Methodology Supervisory Sliding Mode Methodology: Applied to IC Engine. International Journal of Advances in Applied Sciences, 1(3), 116-124.
1097
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1098
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1099
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1100
Piltan, F., Nazari, I., Siamak, S., & Ferdosali, P. (2012). Methodology of FPGA-based mathematical error-based tuning sliding mode controller. International Journal of Control and Automation, 5(1), 89-118.
1101
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Methodology of Mathematical Error-Based Tuning Sliding Mode Controller. International Journal of Engineering, 6(2), 96-117.
1102
Piltan, F., Dialame, M., Zare, A., & Badri, A. (2012). Design Novel Lookup Table Changed Auto Tuning FSMC: Applied to Robot Manipulator. International Journal of Engineering, 6(1), 25-41.
1103
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1104
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1105
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1106
Piltan, F., Aghayari, F., Rashidian, M. R., & Shamsodini, M. (2012). A New Estimate Sliding Mode Fuzzy Controller for Robotic Manipulator. International Journal of Robotics and Automation, 3(1), 45-58.
1107
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1108
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1109
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1110
Piltan, F., Siamak, S., Bairami, M. A., & Nazari, I. (2012). Gradient descent optimal chattering free sliding mode fuzzy control design: LYAPUNOV approach. International Journal of Advanced Science and Technology, 43, 73-90.
1111
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1112
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1113
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1114
Al Mashhadany, Y. I., & MIEEE, H. (2012). ANFIS-Inverse-Controlled PUMA 560 Workspace Robot with Spherical Wrist. Procedia Engineering, 41, 700-709.
1115
Piltan, F., Piran, M., Akbari, M., & Barzegar, M. (2012). Baseline Tuning Methodology Supervisory Sliding Mode Methodology: Applied to IC Engine. International Journal of Advances in Applied Sciences, 1(3), 116-124.
1116
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1117
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1118
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1119
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1120
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1121
Piltan, F., Nazari, I., Siamak, S., & Ferdosali, P. (2012). Methodology of FPGA-based mathematical error-based tuning sliding mode controller. International Journal of Control and Automation, 5(1), 89-118.
1122
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Methodology of Mathematical Error-Based Tuning Sliding Mode Controller. International Journal of Engineering, 6(2), 96-117.
1123
Piltan, F., Dialame, M., Zare, A., & Badri, A. (2012). Design Novel Lookup Table Changed Auto Tuning FSMC: Applied to Robot Manipulator. International Journal of Engineering, 6(1), 25-41.
1124
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1125
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1126
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1127
Piltan, F., Aghayari, F., Rashidian, M. R., & Shamsodini, M. (2012). A New Estimate Sliding Mode Fuzzy Controller for Robotic Manipulator. International Journal of Robotics and Automation, 3(1), 45-58.
1128
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1129
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1130
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1131
Piltan, F., Siamak, S., Bairami, M. A., & Nazari, I. (2012). Gradient descent optimal chattering free sliding mode fuzzy control design: LYAPUNOV approach. International Journal of Advanced Science and Technology, 43, 73-90.
1132
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1133
Piltan, F., Piran, M., Akbari, M., & Barzegar, M. (2012). Baseline Tuning Methodology Supervisory Sliding Mode Methodology: Applied to IC Engine. International Journal of Advances in Applied Sciences, 1(3), 116-124.
1134
Morishita, T., & Tojo, O. (2012). Proposal and evaluation of integer inverse kinematics for multijoint small robot. In Intelligent Robotics and Applications (pp. 376-386). Springer Berlin Heidelberg.
1135
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1136
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1137
Rahmdel, S., Bairamai, M., & Fahham, M. M. H. R. (2012). Design Chattering-Free Performance-Based Fuzzy Sliding Mode Controller for Bus Suspension. International Journal of Engineering Sciences Research-IJESR, 3(05), 796-802.
1138
Bairami, M. A., & AMINIMOGHADAM, M. (2012). e. al," Model-based Fuzzy Sliding Mode plus I Controller Applied to Robot Manipulator,". International Journal of Engineering Sciences Research (IJESR).
1139
Piltan, F., Rahmdel, S., Mehrara, S., & Bayat, R. (2012). Sliding mode methodology vs. Computed torque methodology using matlab/simulink and their integration into graduate nonlinear control courses. International Journal of Engineering, 6(3), 142-177.
1140
Seven Tir Ave, S. Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1141
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1142
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1143
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1144
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1145
Piltan, F., Nazari, I., Siamak, S., & Ferdosali, P. (2012). Methodology of FPGA-based mathematical error-based tuning sliding mode controller. International Journal of Control and Automation, 5(1), 89-118.
1146
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Methodology of Mathematical Error-Based Tuning Sliding Mode Controller. International Journal of Engineering, 6(2), 96-117.
1147
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1148
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1149
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1150
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1151
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1152
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1153
Piltan, F., Siamak, S., Bairami, M. A., & Nazari, I. (2012). Gradient descent optimal chattering free sliding mode fuzzy control design: LYAPUNOV approach. International Journal of Advanced Science and Technology, 43, 73-90.
1154
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1155
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1156
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1157
Piltan, F., Piran, M., Akbari, M., & Barzegar, M. (2012). Baseline Tuning Methodology Supervisory Sliding Mode Methodology: Applied to IC Engine. International Journal of Advances in Applied Sciences, 1(3), 116-124.
1158
Sagar, G. V. R., & Chalam, S. V. (2012). Simultaneous Evolution of Architecture and Connection Weights in Artificial Neural Network. International Journal of Computer Applications, 53(4), 23-28.
1159
Olaoye, J. O., & Oyewole, S. N. (2012). Optimization of some “poundo” yam production parameters. Agricultural Engineering International: CIGR Journal, 14(2), 58-67.
1160
Seven Tir Ave, S. Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1161
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1162
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1163
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1164
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1165
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1166
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1167
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1168
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1169
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1170
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1171
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1172
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1173
Ghaziani, N. O., Perkinson, R., & Hassanipour, F. (2012, May). Experimental analysis of phase change material slurry through porous channel. In Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), 2012 13th IEEE Intersociety Conference on (pp. 845-852). IEEE.
1174
Seven Tir Ave, S. Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1175
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1176
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1177
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1178
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1179
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1180
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1181
Piltan, F., Jahed, A., Rezaie, H., & Boroomand, B. (2012). Methodology of Robust Linear On-line High Speed Tuning for Stable Sliding Mode Controller: Applied to Nonlinear System. International Journal of Control and Automation, 5(3), 217-236.
1182
Piltan, F., Akbari, M., Piran, M., & Bazregar, M. (2012). Design Model Free Switching Gain Scheduling Baseline Controller with Application to Automotive Engine. International Journal of Information Technology and Computer Science (IJITCS), 5(1), 65.
1183
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1184
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1185
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1186
Piltan, F., Mehrara, S., Bayat, R., & Rahmdel, S. (2012). Design New Control Methodology of Industrial Robot Manipulator: Sliding Mode Baseline Methodology.
1187
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1188
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1189
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1190
Piltan, F., Mirzaei, M., Shahriari, F., Nazari, I., & Emamzadeh, S. (2012). Design Baseline Computed Torque Controller. International Journal of Engineering, 6(3), 129-141.
1191
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1192
Piltan, F., Bayat, R., Aghayari, F., & Boroomand, B. (2012). Design Error-Based Linear Model-Free Evaluation Performance Computed Torque Controller. International Journal of Robotics and Automation, 3(3), 151-166.
1193
Rahmdel, S., & Bairami, M. (2012). Model-Free Sliding Mode Fuzzy Controller with Minimum Rule Base Implemented on Bus Suspension System. International Journal of Engineering Sciences Research (IJESR).
1194
Rahmdel, S., Bairamai, M., & Fahham, M. M. H. R. (2012). Design Chattering-Free Performance-Based Fuzzy Sliding Mode Controller for Bus Suspension. International Journal of Engineering Sciences Research-IJESR, 3(05), 796-802.
1195
Seven Tir Ave, S. Effect of Rule Base on the Fuzzy-Based Tuning Fuzzy Sliding Mode Controller: Applied to 2 nd Order Nonlinear System.
1196
Piltan, F., Yarmahmoudi, M. H., Shamsodini, M., Mazlomian, E., & Hosainpour, A. (2012). PUMA-560 Robot Manipulator Position Computed Torque Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate Nonlinear Control and MATLAB Courses. International Journal of Robotics and Automation, (3), 167-191.
1197
Piltan, F., Emamzadeh, S., Hivand, Z., Shahriyari, F., & Mirazaei, M. (2012). PUMA-560 Robot Manipulator Position Sliding Mode Control Methods Using MATLAB/SIMULINK and Their Integration into Graduate/Undergraduate Nonlinear Control, Robotics and MATLAB Courses. International Journal of Robotics and Automation, 3(3), 106-150.
1198
Piltan, F., Hosainpour, A., Mazlomian, E., Shamsodini, M., & Yarmahmoudi, M. H. (2012). Online Tuning Chattering Free Sliding Mode Fuzzy Control Design: Lyapunov Approach. International Journal of Robotics and Automation, 3(3), 77-105.
1199
Piltan, F., Boroomand, B., Jahed, A., & Rezaie, H. (2012). Performance-Based Adaptive Gradient Descent Optimal Coefficient Fuzzy Sliding Mode Methodology. International Journal of Intelligent Systems and Applications (IJISA), 4(11), 40.
1200
Piltan, F., Meigolinedjad, J., Mehrara, S., & Rahmdel, S. (2012). Evaluation Performance of 2nd Order Nonlinear System: Baseline Control Tunable Gain Sliding Mode Methodology. International Journal of Robotics and Automation, 3(3), 192-211.
1201
Piltan, F., Rahmdel, S., Mehrara, S., & Bayat, R. (2012). Sliding mode methodology vs. Computed torque methodology using matlab/simulink and their integration into graduate nonlinear control courses. International Journal of Engineering, 6(3), 142-177.
1202
Piltan, F., Bayat, R., Mehara, S., & Meigolinedjad, J. (2012). GDO Artificial Intelligence-Based Switching PID Baseline Feedback Linearization Method: Controlled PUMA Workspace. International Journal of Information Engineering and Electronic Business (IJIEEB), 4(5), 17.
1203
Piltan, F., & Haghighi, S. T. (2012). Design Gradient Descent Optimal Sliding Mode Control of Continuum Robots. IAES International Journal of Robotics and Automation (IJRA), 1(4), 175-189.
1204
Giwa, A., & Karacan, S. (2012). State space model predictive control of a reactive distillation process. Int. J. Pure Appl. Sci. Technol, 12(2), 20-33.
1205
SUNAY, Y. E., GÜLAY, ?., & AKGÜL, A. (2012). validation of cfd simulation of store seperation for eglin test case. In 5nd International Scientific Conference OTEH (pp. 18-19).
1206
Yang Shiying, even Zhenjie, & Liao Weiting. (2012). Transonic flow numerical parameter study the effect of a fin elastomer released through the wing. Aerospace and Aviation Science. Series B, 44 (2), 99-108.
1207
Dalfard, V. M., & Mohammadi, G. (2012). Two meta-heuristic algorithms for solving multi-objective flexible job-shop scheduling with parallel machine and maintenance constraints. Computers & Mathematics with Applications, 64(6), 2111-2117.
1208
Narendhar, S., & Amudha, T. (2012). A Hybrid Bacterial Foraging Algorithm for Solving Job Shop Scheduling Problems. arXiv preprint arXiv:1211.4971.
1209
Zhang, D. (2012). Radio Resource Management based on Genetic Algorithms for OFDMA Networks (Doctoral dissertation, Queen Mary University of London).
1210
Rehman, F., Lozano-Parada, J. H., & Zimmerman, W. B. (2012). A kinetic model for H 2 production by plasmolysis of water vapours at atmospheric pressure in a dielectric barrier discharge microchannel reactor. international journal of hydrogen energy, 37(23), 17678-17690.
1211
Valincius, V., Grigaitiene, V., & Tamošiunas, A. (2012). Report on the different plasma modules for pollution removal MO 0 3. Plasma for environ protect.
1212
Afshari, R., & Hosseini, H. (2012). Atmospheric pressure plasma technology: A new tool for food preservation. ICEEB, 33, 275-278.
1213
Tian Liqiang, Liu Shaofeng, Li Yijun, Niehua Li, & Zhu Limin. (2012). The atmospheric pressure plasma pretreatment of cotton fabric / pectinase scouring and dyeing, 38 (16), 1-5.
1214
Mukherjee, A. (2012). LUNAR REGOLITH SIMULANTS (Doctoral dissertation, The Pennsylvania State University).
1215
Mohd, N. D., Bakar, S. A., Zaaba, S. K., & Ahmad, W. K. W. (2012, December). Study on bovine bone surface after atmospheric plasma treatment. In Biomedical Engineering and Sciences (IECBES), 2012 IEEE EMBS Conference on (pp. 70-75). IEEE.
1216
Chen Meijun. (2012). NO investigate the preparation of perovskite-type catalyst used in its decomposition. Thesis Environmental Engineering Research Institute, Central University, 1-110.
1217
Salaman, A. J. (2012). tensile and impact properties of polystyrene matrix composites reinforced by palm natural fibers and carbon fibers. Academic Research International, 3(2), 114.
1218
Milewski, J. (2012). A mathematical model of SOFC: A proposal. Fuel Cells, 12(5), 709-721.
1219
Minh, N. Q. (2012). System technology for solid oxide fuel cells. Fuel Cell Science and Engineering: Materials, Processes, Systems and Technology, 963-1010.
1220
Tryaskin, N., Tkachenko, I., Dukarskiy, A., Yakimov, V., Tryaskin, V., & Kiselev, D. (2012, January). Simulation of the Sloshing in the Prismatic Gas Tank after Impact Interaction of the Vessel with Ice Barrier. In The Twenty-second International Offshore and Polar Engineering Conference. International Society of Offshore and Polar Engineers.
1221
Solís, M., Solís, A., Pérez, H. I., Manjarrez, N., & Flores, M. (2012). Microbial decolouration of azo dyes: a review. Process Biochemistry, 47(12), 1723-1748.
1222
Babuponnusami, A., & Muthukumar, K. (2012). Removal of phenol by heterogenous photo electro Fenton-like process using nano-zero valent iron. Separation and Purification Technology, 98, 130-135.
1223
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2012). Photoreactor design and CFD modelling of a UV/H2O2 process for distillery wastewater treatment. The Canadian Journal of Chemical Engineering, 90(3), 719-729.
1224
Zhu, Y., Quan, X., Chen, F., Fan, X., & Feng, Y. (2012). CeO2–TiO2 coated ceramic membrane with catalytic ozonation capability for treatment of tetracycline in drinking water. Science of Advanced Materials, 4(12), 1191-1199.
1225
Ghafoori, S., Mehrvar, M., & Chan, P. K. (2012). Free-radical-induced degradation of aqueous polyethylene oxide by UV/H2O2: experimental design, reaction mechanisms, and kinetic modeling. Industrial & Engineering Chemistry Research, 51(46), 14980-14993.
1226
Foster, J., Sommers, B. S., Gucker, S. N., Blankson, I. M., & Adamovsky, G. (2012). Perspectives on the interaction of plasmas with liquid water for water purification. Plasma Science, IEEE Transactions on, 40(5), 1311-1323.
1227
Adishkumar, S., Sivajothi, S., & Rajesh Banu, J. (2012). Coupled solar photo-fenton process with aerobic sequential batch reactor for treatment of pharmaceutical wastewater. Desalination and water treatment, 48(1-3), 89-95.
1228
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2012). Using an external-loop airlift sonophotoreactor to enhance the biodegradability of aqueous sulfadiazine solution. Separation and Purification Technology, 90, 173-181.
1229
Anotai, J., Chen, C. M., Bellotindos, L. M., & Lu, M. C. (2012). Treatment of TFT-LCD wastewater containing ethanolamine by fluidized-bed Fenton technology. Bioresource technology, 113, 272-275.
1230
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2012). Optimization of aqueous p-aminophenol degradation by external-loop airlift sonophotoreactor using response surface methodology. Chemical Engineering Research and Design, 90(9), 1221-1234.
1231
De Schepper, W., Dries, J., Geuens, L., & Blust, R. (2012). Sequential partial ozonation for the treatment of wastewater concentrate: practical implications from a conventional and (Eco) toxicological perspective. Ozone: Science & Engineering, 34(3), 163-173.
1232
Lecompte, C. F. (2012). Combined anaerobic-aerobic and UV/H2O2 processes for the treatment of synthetic slaughterhouse wastewater.
1233
Sarma, M., & Shinde, S. N. Modeling of Sonophotocatalytic Degradation of Formic Acid in Pharmaceutical Wastewater Treatment.
1234
Pelaez, M., Falaras, P., Kontos, A. G., Armah, A., O'shea, K., Dunlop, P. S., ... & Dionysiou, D. D. (2012). A comparative study on the removal of cylindrospermopsin and microcystins from water with NF-TiO 2-P25 composite films with visible and UV–vis light photocatalytic activity. Applied Catalysis B: Environmental, 121, 30-39.
1235
Dong Peng, & Zhangyi Tao. (2012). Manufacturing preparation area layout and design optimization of logistics Chengdu Vocational and Technical College, 6 (4), 15-21.
1236
Misron, M. (2012). Kepemimpinan Kepala Sekolah Dalam Meningkatkan Mutu Guru Matematika Di SMK Muhammadiyah 6 Gemolong (Doctoral dissertation, Universitas Muhammadiyah Surakarta).
1237
Agarwal, S. C. (2011). Use of boolean function technique to evaluate reliability of a methane gas plant’s pipeline. Bulletin of Pure & Applied Sciences-Mathematics and Statistics, 30(1), 1-10.
1238
Vandenbroucke, A. M., Morent, R., De Geyter, N., & Leys, C. (2011). Non-thermal plasmas for non-catalytic and catalytic VOC abatement. Journal of hazardous materials, 195, 30-54.
1239
B. Crump and K. Logan, “The Interplay of Third Place, Self-efficacy, Social and Human Capital in a New Zealand Community ICT Youth Project”, The Electronic Journal Information Systems Evaluation, 14(1), pp. 1-11, 2011.
1240
J. R. Ferreira and J. C. Ferreira, “Georeferencing Road Accidents with Google Earth: Transforming Information into Knowledge for Decision Support”, The Electronic Journal Information Systems Evaluation, 14(1), pp. 27-36, 2011.
1241
S. Suganthi, S. Raghavan and D. Kumar, “A Novel Planar Square Fractal Antenna for Wireless Devices”, in Proceedings of Microwaves, Radar and Remote Sensing Symposium (MRRS), 2011, Kiev, 25-27 Aug. 2011, pp. 82 - 85
1242
L. C. Nam, “Removal Efficiency And Kinetic Study Of Bod And Cod Using Aerobic And Anaerobic Digestion”, A project report submitted in partial fulfilment of the requirements for the award of the degree of Bachelor (Hons.) of Chemical Engineering, Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, April 2011.
1243
H. Nashaat, R. Rizk and H. Mahdi, “An Analytical Framework of Fast Handover for Hierarchical MIPv6”, The Online Journal on Computer Science and Information Technology (OJCSIT), 1(2), pp. 38-44, July 2011.
1244
R. Kirubashankar, K. Krishnamurthy, J. Indra and B.Vignesh, “Design and Implementation of Web Based Remote Supervisory Control and Information System”, International Journal of Soft Computing and Engineering (IJSCE), 1(4), pp. 43-51, September 2011.
1245
R.K. Mugelan, M.G.N. Alsath and V. Yokesh, “Fault Tolerant Wireless Sensor Network for Remote Data Acquisition”, in Proceedings of Electronics, Communication and Computing Technologies (ICECCT), 2011 International Conference, Pauls Nagar, 12-13 Sept. 2011, pp. 69 – 72.
1246
Jin Anotai, Chia-Min Chen, Luzvisminda M. Bellotindos, Ming-Chun Lu, “Treatment of TFT-LCD wastewater containing ethanolamine by fluidized-bed Fenton technology”, Bioresource Technology, Available online 1 December 2011.
1247
H. KAUR and E. R. A. VERMA, “Sonophotocatalysis Of 4-CHLORO-2-NITROPHENOLUSING Tio2 Present In Pharmaceutical Industrial”, Thesis submitted for the award of degree of Master of Technology In Environmental Science and Technology, Department Of Bio-Technology And Environmental Sciences Thapar University Patiala-147004, June 2011.
1248
S. Sumaedi, I. G. M. Y. Bakti, “The Students’ Perceived Quality Comparison of ISO 9001 and Non-ISO 9001 Certified School: an Empirical Evaluation”, International Journal of Engineering & Technology IJET-IJENS, 11(01), pp. 104-108, February 2011.
1249
S. M. Al-Najjar and M. K. Jawad, “ISO 9001 Implementation Barriers and Misconceptions: An Empirical Study”, International Journal of Business Administration, 2(3), pp. 118-131, August 2011.
1250
N. Idris, K. Ahmad, “Managing Data Source Quality For Data Warehouse In Manufacturing Services”, in Electrical Engineering and Informatics (ICEEI), 2011 International Conference, Bandung, 17-19 July 2011, pp. 1 – 6.
1251
I. Saleem, I. Siddique, A. Akmal, M. S. M. Khan, M. U. Khan and S. Sultan, “Impact Assessment Of ISO 9000 Series on The Organizational Performance: Empirical Evidence From Small And Medium Enterprise (SME) Sector Of Pakistan”, African Journal of Business Management, 5(26), pp. 10885-10892, October, 2011
1252
M. Fénot, Y. Bertin, E. Dorignac and G. Lalizel, “A Review Of Heat Transfer Between Concentric Rotating Cylinders With Or Without Axial Flow”, International Journal of Thermal Sciences, 50(7), pp. 1138–1155, July 2011.
1253
E. Minisci and M. Vasile, “Robust design of a re-entry unmanned space vehicle by multi-fidelity evolution control”, Proceeding GECCO '11 in 13th annual conference on Genetic and evolutionary computation ACM New York, NY, USA ©2011.
1254
Sumaedi, S., & Bakti, G. M. Y. (2011). The Students Perceived Quality Comparison of ISO 9001 and Non-ISO 9001 Certified School: an Empirical Evaluation. International Journal of Engineering & Technology IJETIJENS, 11(1), 104-108.
1255
D. G. Kopp, “DEVELOPMENT OF AN ON-LINE RADIATION DETECTION & MEASUREMENTS LABORATORY COURSE”, A Thesis Presented to the Graduate School of Clemson University, In Partial Fulfillment of the Requirements for the Degree Master of Science Environmental Engineering, May 2011.
1256
K. M. Cheng and J. C. Tsai, “A Closed-Form Approach for Optimum Tolerance Allocation of Assemblies with General Tolerance-Cost Function”, Advanced Materials Research (Volumes 201 - 203), pp. 1272-1278.
1257
A. Azizi, V. Boppana, A.C. Clement, “A Preliminary Investigation into Geometry, Represented by Parameters, and its Effect on Function and Manufacturing Attributes”, International Journal of Industrial Engineering & Production Research, 22(4), pp. 221-229, Dec. 2011.
1258
R. Fernandes, J. B. Gouveia and C. Pinho, “Target setting under uncertainty”, International Journal of Business Performance and Supply Chain Modelling, 3(4), pp. 297-315, Nov. 2011.
1259
S. D. Leeuw, M. Holweg and Geoff Williams, "The impact of decentralised control on firm-level inventory: Evidence from the automotive industry", International Journal of Physical Distribution & Logistics Management, 41(5), pp.435 – 456, 2011.
1260
W. H. Liao, K. P. Shih, C. Liu, A. K. Dubey, S. Arora and S. P. Kedia, “An efficient scheduling algorithm for radio resource reuse in IEEE 802.16j multi-hop relay networks”, Journal Computers and Electrical Engineering archive, 37(4), pp. 511-525, July. 2011.
1261
S. Najafi, V. M. Dalfard and G. Mohammadi, “Hybrid genetic algorithm for network locating problem by considering multi-purpose trip in stochastic state”, Indian Journal of Science and Technology , 4(9), pp. 1109-1112, Sep. 2011.
1262
K. M. Senthilkuma, V. Selladurai, K. Raja and V. Thirunavukkarasu, “A Hybrid Algorithm Based on PSO and ACO Approach for Solving Combinatorial Fuzzy Unrelated Parallel Machine Scheduling Problem”, European Journal of Scientific Research, 64(2), pp. 293-313, 2011.
1263
M. M. Hasan and Ahsanul Kabir, “Prediction of compressive strength of concrete from early age test result”, in 4th Annual Paper Meet and 1st Civil Engineering Congress, Dhaka, Bangladesh, Dec 22-24, 2011, pp. 1-7.
1264
S. B. Cui and F. W. He, “Study of Applied Properties of Aminosulphonic Acid Based Superplasticizer”, Applied Mechanics and Materials, Advances in Mechanical Engineering, Vols 52 – 54, pp. 1650-1655, Mar. 2011.
1265
T. S. G. Basha, P. V. Sridevi and M. N. G. Prasad, “Enhancement in Gain and Interference of Smart Antennas Using Two Stage Genetic Algorithm by Implementing it on Beam Forming”, International Journal of Electronics Engineering, 3 (2), pp. 265– 269, 2011.
1266
K. S. Nawaz, K. N. Khan, K. Glette, M. Hovin and J. Torresen, “Using pareto-optimality for solving multi-objective unequal area facility layout problem”, in 13th annual conference on Genetic and evolutionary computation ACM New York, NY, USA ©2011, pp. 681-688.
1267
Z. Bayraktar, M. Komurcu, Z. H. Jiang, D.H. Werner, P.L .Werner,“Stub-loaded inverted-F antenna synthesis via Wind Driven Optimization”, in IEEE International Conference Antennas and Propagation , Spokane, 3-8 July 2011, pp. 2920 – 2923.
1268
P. Biswas and S. Pramanik. “Replacement Problem with Grey Parameters.” International Journal of Computer Applications, 32(9), pp. 11-16, October 2011.
1269
L. Patidar and A. Parikh. “BER Comparison of DCT-based OFDM and FFT-based OFDM using BPSK Modulation over AWGN and Multipath Rayleigh Fading Channel.” International Journal of Computer Applications, 31(10), pp. 38-4, October 2011.
1270
B. Abdi, H. Mozafari, A. Ayob and R. Kohandeld, “Thermal Effect on Buckling of General Dome Ends Using Finite Element Method “, Applied Mechanics and Materials, Vols 121-126, pp. 340-345, October 2011.
1271
Halim, S. A., Hadi, N. A., Ibrahim, A., & Manurung, Y. H. (2011, May). The geometrical feature of weld defect in assessing digital radiographic image. In Imaging Systems and Techniques (IST), 2011 IEEE International Conference on (pp. 189-193). IEEE.
1272
Ferreira, J. (2011). Georeferencing Road Accidents with Google Earth: Transforming Information into Knowledge for Decision Support.
1273
Kumar, M., Bansal, P. P., & Kaushik, S. K. (2011). Effect of initial stress levels on strength parameters of reinforced concrete beams retrofitted using Ferrocement jackets. Journal of Testing and Evaluation, 39(5), 1-10.
1274
Hussain, K., Choktaweekarn, P., Tangtermsirikul, S., Chantasorn, U., Srisansanee, C., Mosaad, M. I., ... & Tapchaisri, P. (2011). Effect of mineral admixtures on curing sensitivity of concrete. Thammasat International Journal of Science and Technology, 16(3).
1275
Majid, A. (2011). Resistivity measurements of conductors and semiconductors of different geometrical shapes using van der Pauw technique. IJSER, submitted for publication.
1276
Majid, A. An Innovative Method of Measuring Semiconductors Resistivity Using Van der Pauw Technique. IJSER, submitted for publication.
1277
Kux, S. (2011). Hybride Optimierungsstrategien für komplexe technische Aufgabenstellungen. Masterarbeit, Hochschule Mittweida.
1278
Hassan, W. H., & Al-Imam, A. M. (2011). An IPv6 Test Bed for Mobility Support in Next Generation Wireless Networks. In Digital Information and Communication Technology and Its Applications (pp. 9-20). Springer Berlin Heidelberg.
1279
Suresh, K. D., Kirubashankar, R., & Krishnamurthy, K. (2011, June). Research of Internet based supervisory control and information system. In Recent Trends in Information Technology (ICRTIT), 2011 International Conference on (pp. 1180-1185). IEEE.
1280
Khera, M. N., & Balguvhar, S. Design of microcontroller based wireless SCADA system for real time data. Uacee International Journal Of Advances In Electronics Engineering, 2(1).
1281
Ahmad, M., Shafique, M., & Baloch, M. H. Smart SCADA Implementation for Small Industry.
1282
Nagalakshmi, S., & Ahamed, Z. H. (2011). Online Assessment of Power System Static Security Using Artificial Neural Network. Artificial Intelligent Systems and Machine Learning, 3(12), 780-786.
1283
Wang, A., Luo, Y., Tu, G., & Liu, P. (2011). Quantitative evaluation of human-reliability based on fuzzy-clonal selection. Reliability, IEEE Transactions on, 60(3), 517-527.
1284
Fénot, M., Bertin, Y., Dorignac, E., & Lalizel, G. (2011). A review of heat transfer between concentric rotating cylinders with or without axial flow. International journal of thermal sciences, 50(7), 1138-1155.
1285
Picazo-Rodenas, M. J., Royo, R., Antonino-Daviu, J., & Roger-Folch, J. (2011, June). Energy balance and heating curves of electric motors based on Infrared Thermography. In Industrial Electronics (ISIE), 2011 IEEE International Symposium on (pp. 591-596). IEEE.
1286
Zabihian, F., & Fung, A. S. (2011, January). Process Flow Model of Combined High Temperature Fuel Cell Operated with Mixture of Methane and Carbon Dioxide. In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (pp. 673-680). American Society of Mechanical Engineers.
1287
Alaydarous, A., Marghilani, A., Zaghib, S., Khan, S., Al Towairqi, M., & Alsulimane, M. Virtual Nuclear Laboratory for E-Learning.
1288
Abu-Mulaweh, H. I. (2011). Design and development of a high-temperature geothermal heat pump. International Journal of Mechanical Engineering Education, 39(3), 219-231.
1289
Ayag, Z. (2011). Evaluating simulation software alternatives through ANP. In Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia.
1290
Imam, I., Nounou, N., Hamouda, A., & Khalek, H. A. A. (2011, October). Survey of business process simulation tools: a comparative approach. In 2011 International Conference on Graphic and Image Processing (pp. 82853B-82853B). International Society for Optics and Photonics.
1291
Hossain, M. E., Abu-Khamsin, S. A., & Al-Helali, A. A. (2011, January). Use of the memory concept to investigate the temperature profile during a thermal EOR process. In SPE/DGS Saudi Arabia Section Technical Symposium and Exhibition. Society of Petroleum Engineers.
1292
Al-Helali, A. (2011). Use of the Memory Concept to Investigate the Temperature Profile during a Thermal EOR Process.
1293
Hossain, M. E., Alabdulkarim, B., Jassim, A., Al-Dhufairy, B., & Al-Ali, A.Aporosity dependent model for a heterogeneous reservoir.
1294
Fard, F. S., Mansor, N. N. A., Mohamed, A., & Bahru, J. (2011, March). The critical success factors of performance measurement for Malaysian SMEs in manufacturing sectors: a proposed framework. In Proceeding of the 2nd International Conference on Business and Economic Research.
1295
Singh, H., Prakash, J., Arora, D., & Wason, A. (2011). Fault tolerant congestion based algorithms in OBS network. International Journal of Engineering (IJE), 5(5), 350.
1296
Fernandes, R., Gouveia, J. B., & Pinho, C. (2011). Target setting under uncertainty. International Journal of Business Performance and Supply Chain Modelling, 3(4), 297-315.
1297
Skills, C. S. A. Personal Data.
1298
Samani, S. G., Yeganeh, A. E., & Hossain, K. M.Prediction of strength properties of engineered cementitious composites using artificial neural network. GEN, 108, 1.
1299
Zaragoza, J. B. H., Lara, T. L., Rangel, J. H., López-Cajún, C., González, E. R., García-Rodríguez, F. J., & Adue, J.Cellular concrete bricks with recycled expanded polystyrene aggregate.
1300
Cui, S. B., & He, F. W. (2011, April). Study of applied properties of aminosulphonic acid based superplasticizer. In Applied Mechanics and Materials (Vol. 52, pp. 1650-1655).
1301
Hossain, M. E., Alabdulkarim, B., Jassim, A., Al-Dhufairy, B., & Al-Ali, A. Aporosity dependent model for a heterogeneous reservoir.
1302
Gehring, B., & Miller, F. (2011, July). Thermodynamic Cycle Analysis and Thermal Storage for Solar Concentrating Power Plants. In 9th Annual International Energy Conversion Engineering Conference, San Diego, CA.
1303
Aarthikha, K., Gowtham, J., & Sangari, M. S. (2011). A Comprative Study on Object Segregation in SatelliteImages Using PSO and K-Mean. International Journal of Computer Application (0975-8887), 34(8).
1304
Khalid, N. E. A., Ariff, N. M., Yahya, S., & Noor, N. M. (2011). A Review of Bio-inspired Algorithms as Image Processing Techniques. In Software Engineering and Computer Systems (pp. 660-673). Springer Berlin Heidelberg.
1305
Murti, A. S. N., Sastry, D. R. V. S. R. K., Kameswaran, P. K., & Kantha, T. P. Effects of Mixed Convection and Double Dispersion on Semi Infinite Vertical Plate in Presence of Radiation.
1306
Biswas, P., & Pramanik, S. (2011). Replacement Problem with Grey Parameters. International Journal of Computer Applications (0975-8887), 32(9), 11-16.
1307
Khabiri, M. M. (2011). The Effect of Initial Moisture in Stabilization of Sandy Soil by Emulsion Bitumen. International Journal of Engineering (IJE), 5(4), 1.
1308
Bayraktar, Z. (2011). Novel meta-surface design synthesis via nature-inspired optimization algorithms (Doctoral dissertation, The Pennsylvania State University).
1309
Patidar, L., & Parikh, A. (2011). BER Comparison of DCT-based OFDM and FFT-based OFDM using BPSK Modulation over AWGN and Multipath Rayleigh Fading Channel. International Journal of Computer Applications, 31(10), 38-42.
1310
Sköld, O. (2011). The effects of virtual space on learning: A literature review. First Monday, 17(1).
1311
Ardekani, S., Ghandehari, M., & Nepal, S. (2011). Macroscopic speed-flow models for characterization of freeway and managed lanes. Institutul Politehnic din Iasi. Buletinul. Sectia Constructii. Arhitectura Vol, 57, 140-160.
1312
Arefin, M. K., Hasan, M. R., & Azad, A. (2011). Characteristics and cost analysis of an automatic solar hot water system in Bangladesh. International Proceedings of Chemical, Biological and Environmental Engineering, 6(2).
1313
Azizi, A., Boppana, B., & Clement, A. C. (2011). A preliminary investigation into geometry, represented by parameters, and its effect on function and manufacturing attributes. Int J Ind Eng Prod Res, 22(4), 221-229.
1314
Ng, P. K., Saptari, A., & Fauzi, A. M. Hand Anthropometry: A Descriptive Analysis on Elderly Malaysians.
1315
Ayag, z., & yücekaya, a. d. (2011). a-cut fuzzy analytic network process based approach to evaluate simulation software packages.
1316
Piltan, F., Bairami, M. A., Aghayari, F., & Allahdadi, S. (2011). Design adaptive artificial inverse dynamic controller: Design sliding mode fuzzy adaptive new inverse dynamic fuzzy controller. International Journal of Robotics and Automation (IJRA), 3(1), 13.
1317
Piltan, F., Allahdadi, S., Mohammad, A. B., & Nasiri, H. (2011). Design Auto Adjust Sliding Surface Slope: Applied to Robot Manipulator. International Journal of Robotics and Automation, 3(1), 27-44.
1318
Nashed, M. N. High Dynamic Performance of PMSM Drive Using MIMO Fuzzy Controller.
1319
Piltan, F., Bairami, M. A., Aghayari, F., & Allahdadi, S. (2011). Design adaptive artificial inverse dynamic controller: Design sliding mode fuzzy adaptive new inverse dynamic fuzzy controller. International Journal of Robotics and Automation (IJRA), 3(1), 13.
1320
Piltan, F., Allahdadi, S., Mohammad, A. B., & Nasiri, H. (2011). Design Auto Adjust Sliding Surface Slope: Applied to Robot Manipulator. International Journal of Robotics and Automation, 3(1), 27-44.
1321
Suther, T., Fung, A. S., Koksal, M., & Zabihian, F. (2011). Effects of operating and design parameters on the performance of a solid oxide fuel cell–gas turbine system. International Journal of Energy Research, 35(7), 616-632.
1322
Sghaier, M. (2011). Combinaison des techniques d'optimisation et de l'intelligence artificielle distribuée pour la mise en place d'un système de covoiturage dynamique (Doctoral dissertation, Ecole Centrale de Lille).
1323
Rodriguez, S. B. (2011). Swirling Jets for the Mitigation of Hot Spots and Thermal Stratification in the VHTR Lower Plenum. 7474, Sandia National Laboratories (available at.
1324
Curcio, S., Calabrò, V., & Iorio, G. (2011). Design and tuning of feedback controllers: effects on proteins ultrafiltration process modeled by a hybrid system. Desalination and Water Treatment, 34(1-3), 295-303.
1325
Majazi Dalfard, V., Ardakani, A., & Nazalsadat Banihashemi, T. (2011). Hybrid genetic algorithm for assembly flow-shop scheduling problem with sequence-dependent setup and transportation times. Tehnicki vjesnik, 18(4), 497-504.
1326
Abdul-Majeed, W. S., Parada, J. H. L., & Zimmerman, W. B. (2011). Optimization of a miniaturized DBD plasma chip for mercury detection in water samples. Analytical and bioanalytical chemistry, 401(9), 2713-2722.
1327
Haghdel, A., Abiri, H., Eskandari, M. R., & Zibaeinejad, H. (2011). Measurement of Ions Penetration Pattern in Point to Grid Atmospheric Corona Discharge. Japanese Journal of Applied Physics, 50(1R), 016001.
1328
Suyjiw, S., & Magaraphan, R. Plasma-assisted Processing of Polypropylene/Clay Nanocomposites.
1329
Zimmerman, B. (2011). Wameath S. Abdul-Majeed, Jaime H. Lozano Parada & William. Anal Bioanal Chem, 401, 2713-2722.
1330
Navratil, M. Z. Bachelor thesis Spectroscopy discharges in rare gases.
1331
Han Xiao Chen. (2011). Non-thermo-mechanical pulp bonded sorbent isopropanol desorption efficacy discussed. Thesis Environmental Engineering Research Institute, Central University, 1-96.
1332
Alavudeen, A., Thiruchitrambalam, M., Venkateshwaran, N., & Athijayamani, A. (2011). Review of natural fiber reinforced woven composite. Rev. Adv. Mater. Sci, 27, 146-150.
1333
Utkarsh, S., Mahesha, G. T., & Banerjee, S. Review of Natural Fiber Composites.
1334
Milewski, J. (2011). SOFC hybrid system optimization using an advanced model of fuel cell. Sustainable Research and Innovation Proceedings, 3.
1335
Pezzini, P., Caratozzolo, F., & Traverso, A. (2011, January). Real-Time Simulation of an Experimental Rig With Pressurized SOFC. In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (pp. 113-121). American Society of Mechanical Engineers.
1336
Zabihian, F., & Fung, A. S. (2011, January). Process Flow Model of Combined High Temperature Fuel Cell Operated with Mixture of Methane and Carbon Dioxide. In ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition (pp. 673-680). American Society of Mechanical Engineers.
1337
Dasgupta, A. (2011). Effect of Tank Cross-Section and Longitudinal Baffles on Transient Liquid Slosh in Partly-Filled Road Tankers (Doctoral dissertation, Concordia University Montreal, Quebec, Canada).
1338
Koli, G. C., & Kulkarni, V. V. (2011). Simulation of Sloshing Phenomena Using ALE Approach. Journal of Mechanics Engineering and Automation, 1(1), 53-60.
1339
KELRIH, M., & krill, C. (2011). Theoretical basis of the calculation of simplified water hammer pressure in the glands-nodorozhnoy tank.
1340
Cao, W., & Mehrvar, M. (2011). Slaughterhouse wastewater treatment by combined anaerobic baffled reactor and UV/H 2 O 2 processes. Chemical Engineering Research and Design, 89(7), 1136-1143.
1341
Belkheiri, D., Fourcade, F., Geneste, F., Floner, D., Aït-Amar, H., & Amrane, A. (2011). Feasibility of an electrochemical pre-treatment prior to a biological treatment for tetracycline removal. Separation and Purification Technology, 83, 151-156.
1342
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2011). Nonlinear modeling for the degradation of aqueous azo dyes by combined advanced oxidation processes using artificial neural networks. Chemical Product and Process Modeling, 6(1).
1343
Mostafaii, G. R., Dehghani, R., Hasanzadeh, M., & Mousavi, S. G. A. (2011). A comparison between advanced O3/UV and H2O2/UV oxidation processes for the treatment of municipal solid waste leachate. Feyz Journals of Kashan University of Medical Sciences, 16(1).
1344
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2011). Correlation and prediction of azo dye degradation by nonlinear least-square regression in combined ozonation and ultrasonolysis processes. Water Quality Research Journal of Canada, 46(3), 250-258.
1345
G. Bassioni, “The Influence of Cement Composition on Superplasticizers’ Efficiency”, International Journal of Engineering (IJE), 3(6), pp. 577 – 587, January 2010.
1346
G. Bassioni, “The Influence of Cement Composition on Superplasticizers’ Efficiency”, International Journal of Engineering (IJE), 3(6), pp. 577 – 587, January 2010.
1347
Ehlbeck, J., Schnabel, U., Polak, M., Winter, J., Von Woedtke, T., Brandenburg, R., ... & Weltmann, K. D. (2010). Low temperature atmospheric pressure plasma sources for microbial decontamination. Journal of Physics D: Applied Physics, 44(1), 013002.
1348
K.M. A. Jeyanthi and A.P.Kabilan, “Modeling and Simulation of Microstrip Patch Array for Smart Antennas”, International Journal of Engineering (IJE), 3(6), pp. 662 – 670, January 2010.
1349
A. Aggarwal and M. V. Kartikeyan, “Pythagoras Tree: A Fractal Patch Antenna for Multi-Frequency and Ultra-Wide Bandwidth Operations”, Progress in Electromagnetics Research C, 16, pp. 25-35, 2010.
1350
R. R. Aggarwal and Dr. L. Kaur, “Fault-Tolerance and Permutation Analysis of ASEN and its Variant”, International Journal of Computer Science and Information Technologies, 1(1), pp. 24-32, 2010.
1351
R. Aggarwal and Dr. L. Kaur, “Simulation of Permutation Passibility of FaultTolerant Multistage Interconnection Networks”, International J. of Recent Trends in Engineering and Technology, 3( 2), pp. 24-28, May 2010.
1352
M. Mohajerani, M. Mehrvar and F. Ein-Mozaffari, “CFD Modeling of Metronidazole Degradation in Water by the UV/H2O2 Process in Single and Multilamp Photoreactors”, Ind. Eng. Chem. Res., 49 (11), pp 5367–5382, April 2010.
1353
A. T. Al-Halhouli, A. Waldschik, M. I. Kilani, S. Büttgenbach: “Gentle Micropump Based on Microelectromagnetic Actuator” NSTI Nanotech, 2(2010), pp. 340-343, June 2010.
1354
C. V. Srikrishna and N. Bawane, “A Novel Method for Quantitative Assessment of Software Quality”, International Journal of Computer Science and Security (IJCSS), 3(6), pp. 508 – 517, January 2010.
1355
S. Asghar and M. Umar, “Requirement Engineering Challenges in Development of Software Applications and Selection of Customer-off-the-Shelf (COTS) Components”, International Journal of Software Engineering (IJSE), 1(2), pp. 32 – 50, July 2010.
1356
H.A. Mandave and P.M. Khodke, “Quality Management Model For Small Ancillaries: Benchmarking Customer's Assessment Criteria”, International Journal of Logistics Economics and Globalisation, 2( 4), pp. 352-369, December, 2010.
1357
C. Zioutis , A. Spyropoulos , A. Fragias , D. Margaris and D. Papanikas, “Influence of Helicopter Rotor Wake Modeling on Blade Airload Predictions”, International Journal of Engineering (IJE), 3(6), pp. 521 – 537, January 2010.
1358
S. A. Alkaff and M. Khan, “A New Strategy to Achieve Radical Combustion Through Exhaust Port Throttling for Two Stroke Engine”, International Journal of Engineering (IJE), 4(2), pp. 139 – 148, 2010.
1359
A. Dhingra and P. Chandna, “A bi-criteria M-machine SDST flow shop scheduling using modified heuristic genetic algorithm”, International Journal of Engineering, Science and Technology, 2(5), pp. 216-225, 2010.
1360
K. Alic, A. Švigelj and T. Javornik, “System performance evaluation of the IEEE 802.16e pico-base station in multihop-relay and mesh networks”, WSEAS TRANSACTIONS on COMMUNICATIONS, 10(9), pp. 615-625, Oct 2010.
1361
P. Arikaran , Dr. V. Jayabalan and R. Senthilkumar, “Analysis of Unequal Areas Facility Layout Problems”, International Journal of Engineering (IJE), 4(1), pp. 44 – 51, Mar. 2010.
1362
K. Alic, A. Švigelj and T. Javornik, “Simulation model for multihop relay network based on mobile WiMAX standard”, LATEST TRENDS on COMMUNICATIONS, in 14th WSEAS international conference on Communications World Scientific and Engineering Academy and Society (WSEAS) Stevens Point, Wisconsin, USA ©2010, pp. 149-154, 2010.
1363
C.Deepa, K.SathiyaKumari and V.Pream Sudha. “Prediction of the Compressive Strength of High Performance Concrete Mix using Tree Based Modeling.” International Journal of Computer Applications vol. 6(5) :pp. 18–24, Sep 2010.
1364
C.DEEPA, K.SATHIYAKUMARI and V. P. SUDHA, “A TREE BASED MODEL FOR HIGH PERFORMANCE CONCRETE MIX DESIGN”, International Journal of Engineering Science and Technology, 2(9), pp. 4640-4646, 2010.
1365
M. E. Hossain, “The Real Challenges in Reservoir Simulation”, in 2nd Saudi Meeting on Oil and Natural Gas Exploration and Production Technologies (OGEP 2010) held at the King Fahd University of Petroleum & Minerals (KFUPM) Campus in Dhahran, Kingdom of Saudi Arabia, December 18-20, 2010, pp. 1-5.
1366
Adibi, S. (2010, June). An application layer non-repudiation wireless system: A cross-layer approach. In World of Wireless Mobile and Multimedia Networks (WoWMoM), 2010 IEEE International Symposium on a (pp. 1-2). IEEE.
1367
N. Saleeb and G. Dafoulas, “Analogy between Student Perception of Educational Space Dimensions and Size Perspective in 3D Virtual Worlds versus Physical World”, International Journal of Engineering (IJE), 4(3), pp. 210 – 218, July. 2010.
1368
Asghar, S., & Umar, M. (2010). Requirement engineering challenges in development of software applications and selection of customer-off-the-shelf (COTS) components. International Journal of Software Engineering, 1(1), 32-50.
1369
Ferreira, J. R., & Ferreira, J. C. (2010, September). Georeferencing Road Accidents with Google Earth. In Proceedings of the 4th European Conference on Information Management and Evaluation: Universidade Nova de Lisboa, Lisbon, Portugal 9-10 September 2010 (p. 68). Academic Conferences Limited.
1370
Bassioni, G. (2010). The Influence of Cement Composition on Superplasticizers’ Efficiency Full text.
1371
Bassioni, G. (2010). The influence of cement composition on superplasticizers’ efficiency. International Journal of Engineering (IJE), 3(6), 577.
1372
Bassioni, G. (2010). The Influence of Cement Composition on Superplasticizers’ Efficiency Full text.
1373
alias Jeyanthi, K. M., & Kabilan, A. P. (2010). Modeling and simulation of Microstrip patch array for smart antennas. International Journal of Engineering (IJE), 3(6), 662.
1374
Al-Halhouli, A. T. (2010, February). Analysis on the effect of geometrical design parameters on maximum shear stresses in an electromagnetic micropump. In MOEMS-MEMS (pp. 759315-759315). International Society for Optics and Photonics.
1375
Bu¨ttgenbach, S. (2010, January). Numerical Analysis of Mixing in a Multifunction Electromagnetic Micropump. In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting (pp. 1299-1302). American Society of Mechanical Engineers.
1376
Garg, D., Kumar, K., & Singh, J. (2010). Reliability Evaluation and Decision Support System of a Pharmaceutical Plant. IUP Journal of Science & Technology, 6(3).
1377
Garg, D., Kumar, K., & Singh, J. reliability evaluation and decision support system of a tab manufacturing plant.
1378
Garg, D., Kumar, K., & Sigh, J. (2010). Decision support system of a tab manufacturing plant. Journal of Mechanical Engineering, 41(1), 71-79.
1379
Bassioni, G., Pillay, A. E., El Kadi, M., Fegali, F., Cheong Fok, S., & Stephen, S. (2010). Tracking traces of transition metals present in concrete mixtures by inductively-coupled plasma mass spectrometry studies. European Journal of Mass Spectrometry, 16(6), 679.
1380
Saleeb, N., & Dafoulas, G. (2010). Analogy between student perception of educational space dimensions and size perspective in 3D virtual worlds versus physical world. International Journal of Engineering (IJE), 4(3), 210-218.
1381
Saleeb, N., & Dafoulas, G. (2010, November). Perception of color in 3D Virtual World architectural computer aided design: impact of color design in student satisfaction. In Computer Engineering and Systems (ICCES), 2010 International Conference on (pp. 207-212). IEEE.
1382
Sumaedi, S. (2010). Iso 9001 implementation studies on small medium enterprise: motives, problems, and benefits. jurnal standardisasi, 12(3), 197-201.
1383
Zabihian, F., Fung, A. S., & Koksal, M. (2010, January). Gasified Biomass Fueled Hybrid Sofc Based Power Cycle: Impacts Of Carbon Monoxide Fraction In Inlet Fuel. In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology (pp. 73-82). American Society of Mechanical Engineers.
1384
Zabihian, F., Fung, A. S., & Koksal, M. (2010). Process Flow Model of Combined High Temperature Fuel Cell Operated with Mixture of Methane and Hydrogen. Journal of Energy and Power Engineering, 4(11).
1385
Zabihian, F., Fung, A. S., & Koksal, M. (2010, January). Steady-State Modeling of Methane Fueled SOFC-GT System: Variation of Operational Parameters Throughout the Cycle. In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology (pp. 83-92). American Society of Mechanical Engineers.
1386
Zabihian, F., Fung, A. S., & Koksal, M. (2010, January). Performance of Biogas Fueled Hybrid Solid Oxide Fuel Cell (SOFC) and Gas Turbine Cycle. In ASME 2010 4th International Conference on Energy Sustainability (pp. 213-223). American Society of Mechanical Engineers.
1387
Mohajerani, M., Mehrvar, M., & Ein-Mozaffari, F. (2010). Recent achievements in combination of ultrasonolysis and other advanced oxidation processes for wastewater treatment. International Journal of Chemical Reactor Engineering, 8(1).
1388
S. Büttgenbach , A. Balck , S. Demming , C. Lesche , M. Michalzik and Alaaldeen, “Development of on Chip Devices for Life Science Applications”, International Journal of Engineering (IJE), 3(2), pp. 148 – 158, April 2009.
1389
Sandeep Sharma , K. S. Kahlon and P. K. Bansal, “Reliability and path length analysis of irregular fault tolerant multistage interconnection network”, Newsletter ACM SIGARCH Computer Architecture News archive, 37(5), pp. 16-23, December 2009.
1390
W.H. Hassan, A.M. Mahmood and N. Fisal, , “An Agent-Based Mobility Protocol for Improved Mobile QoS in Next Generation IP Networks”, in Proceedings of Fifth International Joint Conference, Seoul, 25-27 Aug. 2009, pp. 251 – 256.
1391
M Aksas and A H. Benmachiche, “Multi-Dimentional Upwind Schemes for the Euler Equations on Unstructured Grids”, International Journal of Engineering (IJE), 3(2), pp. 185 – 200, April 2009.
1392
A. Goel and A. Sharma, “Performance Analysis of Mobile Ad-hoc Network using AODV Protocol”, International Journal of Computer Science and Security (IJCSS), 3(5), pp. 334 – 343, November 2009.
1393
S. Nema , A. Goel and R.P. Singh, “Integrated DWDM and MIMO-OFDM System for 4G High Capacity Mobile Communication System”, Signal Processing: An International Journal (SPIJ), 3(5), pp. 132 – 143, November 2009.
1394
M. R. Nematollahi , M. Asmani , M. Nazififard and H. Hashizumeh, “Effect of Bend Curvature Ratio on Flow Pattern at a Mixing Tee after a 90 Degree Bend”, International Journal of Engineering (IJE), 3(5), pp. 478 – 487, November 2009.
1395
Aksas, M., & Benmachiche, A. H. (2009). Multi-dimentional upwind schemes for the Euler Equations on unstructured grids. International Journal of Engineering (IJE), 3(2), 185.
1396
Aksas, M., & Benmachiche, A. H. (2009). Multi-dimentional upwind schemes for the Euler Equations on unstructured grids. International Journal of Engineering (IJE), 3(2), 185.
1397
Aggarwal, R., Kaur, L., & Aggarwal, H. (2009). Design and reliability analysis of a new fault-tolerant multistage interconnection network. Icgst-cnir journal, 8(2), 17-23.
1398
Aksas, M., & Benmachiche, A. H. (2009). Multi-dimentional upwind schemes for the Euler Equations on unstructured grids. International Journal of Engineering (IJE), 3(2), 185.
1399
Al-Halhouli, A. A. T. (2009). Recent advances in on-disk viscous micropumps. Journal of Microelectronics and Electronic Packaging, 6(4), 240-249.
1400
Garg, D., & Kumar, K. (2009). Matrix-Based System Reliability Method and Its Application to Rice Plant. IUP Journal of Computational Mathematics, 2(4).
1401
Garg, D., Kumar, K., & Singh, J. Matrix based system reliability method and application to Tab Manufacturing Plant. In International Conference on Quality, Reliability and Infocom Technology (ICQRIT),(Dec. 2009) (pp. 18-20).
1402
Garg, D., & Kumar, K. (2009). Reliability Analysis of Pharmaceutical Plant Using Matlab-Tool. International Journal of Electronic Engineering Research, 1(2), 127-133.
1403
A. Mustafa , A. H. A. Hashim , O. Khalifa and S. A. Hamed, “Adaptive Emotional Personality Model based on Fuzzy Logic Interpretation of Five Factor Theory”, Signal Processing: An International Journal (SPIJ), 2(4), pp. 1 – 9, August 2008.
1404
A. Mustafa, A. H. A. Hashim , O. Khalifa and S. A. Hamed, “Adaptive Emotional Personality Model based on Fuzzy Logic Interpretation of Five Factor Theory’, Signal Processing: An International Journal (SPIJ), 2(4), pp. 1 – 9, August 2008.
1405
R. Aggarwal and L. Kaur, “On Reliability Analysis of Fault-tolerant Multistage Interconnection Networks”, International Journal of Computer Science and Security (IJCSS), 2(4), pp. 1 – 8, August 2008.
1406
A. Mustafa , A. H. A. Hashim , O. Khalifa and S. A. Hamed, “Adaptive Emotional Personality Model based on Fuzzy Logic Interpretation of Five Factor Theory”, Signal Processing: An International Journal (SPIJ), 2(4), pp. 1 – 9, August 2008.
1407
Mustafa, A., Abdalla Hashim, A. H., Khalifa, O. O., & Hameed, S. A. (2008). Adaptive Emotional Personality Model based on Fuzzy Logic Interpretation of Five Factor Theory. International Journal of Signal Processing, 2(4), 1-9.
1408
Garg, P., & Goyal, N. (2006). Blocking Performance Enhancement Using Congestion Control in Optical Burst Switching Networks.
1409
Bi, Z., & Qian, Z. (2002). Recent Development of Rehabilitation Robots. School of Mechanical and Power Engineering, East China University of Science &Technology, Meilong road, Shanghai, China.
1410
Faculty, F. (2002). Thesis.
1411
Kumar, V., & Purusotham, S. (2015). A Lexi-Search Approach of Variant Vehicle Routing Problem. International Journal of Advanced Research in Computer Science, 6(1).
1412
Ahmed, Z. H. (2014). A data-guided lexisearch algorithm for the quadratic assignment problem. Indian Journal of Science and Technology, 7(4), 480-490.
1413
LaRusic, J., & Punnen, A. P. (2014). The asymmetric bottleneck traveling salesman problem: Algorithms, complexity and empirical analysis. Computers & Operations Research, 43, 20-35.
1414
Swiercz, A., Burke, E. K., Cichenski, M., Pawlak, G., Petrovic, S., Zurkowski, T., & Blazewicz, J. (2014). Unified encoding for hyper-heuristics with application to bioinformatics. Central European Journal of Operations Research, 22(3), 567-589.
1415
Ahmed, Z. H. (2013). An exact algorithm for the clustered travelling salesman problem. Opsearch, 50(2), 215-228.
1416
Ahmed, Z. H. (2013). A hybrid genetic algorithm for the bottleneck traveling salesman problem. ACM Transactions on Embedded Computing Systems (TECS), 12(1), 9.
1417
Ahmed, Z. H. (2013). A new reformulation and an exact algorithm for the quadratic assignment problem. Indian Journal of Science and Technology, 6(4), 4368-4377.
1418
Ahmed, Z. H. (2011). A data-guided lexisearch algorithm for the bottleneck travelling salesman problem. International Journal of Operational Research, 12(1), 20-33.
1419
Ahmed, Z. H. (2011). A data-guided lexisearch algorithm for the asymmetric traveling salesman problem. Mathematical Problems in Engineering, 2011.
1420
Ahmed, Z. H. (2010). Solution algorithms for a deterministic replacement problem. International Journal of Engineering (IJE), 4(3), 233.
1421
Ahmed, Z. H. (2010). A hybrid sequential constructive sampling algorithm for the bottleneck traveling salesman problem.
1422
Babu, K. S. International journal of engineering sciences & research technology a data guided lexi-serach approach for time dependent travelling salemsman problem.
1423
Tripathy, S., Prakash, L. B. O. M., Patro, B. S., & Mandal, S. K. (2013). A Comparative Analysis of Different 8-Bit Adder Topologies at 45nm Technology. International Journal of Engineering Research & Technology (IJERT) Vol, 2.
1424
Yoshiaki Ueda, Tomoya Nakajima, & Manabu Iguchi. (2012). Approach Lagrangian vortex particle method for the mobile interface with a density difference. Experimental mechanics, 12 (3), 207-212.
1425
Yoshiaki Ueda, Tomoya Nakajima, & Manabu Iguchi. (2012). Approach Lagrangian vortex particle method for the mobile interface with a density difference. Experimental mechanics, 12 (3), 207-212.
1426
Ayde, A. (2014). Developing an Expert System for Computer and Network Troubleshooting (Doctoral dissertation, AAU).